Loading ...
Loading ...
Loading ...
14
Connect to Wi-Fi
(Wireless Operation)
(For iOS and Android version)
By connecting this unit and mobile phones,
tablets (such as iPad, iPhone, iPod touch,
Android phones, etc.) to the same Wi-Fi
network, you can then use the Philips Sound
app powered by DTS Play-Fi to control the
VRXQGEDUWROLVWHQWRDXGLRÀOHV
1 Connect your phone or tablet to the same
Wi-Fi network that you want to connect
your soundbar
2 Download and install the Philips Sound
app powered by DTS Play-Fi on a phone
or tablet.
Set Up
Philips Sound
Philips Sound
Devices
Set Up Play-Fi Device
Philips Sound
Update Available
Download & Update
3
2
1
Philips Sound
Choose Name
Bathroom
.
.
.
.
Custom Name
• Make sure your router is turned on and
working properly.
3 Press and hold (Wi-Fi) button located
at the back cabinet for 8 sec to trigger the
Wi-Fi connection.
» Until the speaker make a second tone
and then release the button.
4 Wait until the Wi-Fi light indicator on
front cabinet goes from a fast blink to a
slow pulse.When it begins slow pulsing
indicating that the speaker is entering the
Wi-Fi setup mode.
5 Launch the Philips Sound App powered by
DTS Play-Fi. Follow the instructions in the
App to connect this product to your Wi-Fi
network.
Note
For iOS version only
Wi-Fi network used by iPhone should be
switched temporarily to Play-Fi device AP and
restart Philips Sound APP to complete the
product’s Wi-Fi setup. See the steps below:
• Go to Settings. • Select Wi-Fi setting.
• Select the Play-Fi device
in the Wi-Fi set up
• Return to Philips Sound
App to continue the
set up.
6 After successful Wi-Fi connection, the
Wi-Fi light indicatar on the front cabinet
will stop pulsing and turn solid. Once you
set up this product on your Wi-Fi network,
you can control it from any smartphone or
tablet on the same network.
» When using the APP to play music, the
display panel will show PLAY-FI.
7 After connection, you can change the
device name. There are several names
to choose from or create your own by
choosing Custom Name at the end of the
name list. Otherwise, it follows the default
name.
Loading ...
Loading ...
Loading ...