Loading ...
Loading ...
Loading ...
16
Programme selector
For the various types of fabrics and various degrees of dirt the washing machine has
different programme bands according to: wash cycle, temperature and lenght of cycle (see
table of washing cycle programmes).
COTTON WITH PRE WASH
The Cotton programme is designed for maximum washing and rinsing
efficiency. With spin cycles in between, the programme guarantees the
laundry is rinsed perfectly. The final spin cycle ensures laundry is spun dry
as much as possible up to the maximum speed.
The Cotton programme includes a Prewash cycle. This option is
particularly useful for really dirty loads and can be used independently of
the main wash programme. Additional detergent for the Prewash part of
the programme should be added to the first compartment of the soap
drawer labelled "1" (please refer to the section of this manual entitled
“Detergent”). We recommend you use only 20% of the quantity used for
the main wash programme.
COTTON
The Cotton programme is also designed for maximum washing and rinsing
efficiency. With spin cycles in between, the programme guarantees the
laundry is rinsed perfectly. The final spin cycle ensures laundry is spun dry
as much as possible up to the maximum speed. This cycle is set to 40°C,
but the temperature may be altered using the Temperature option button.
MIXED AND SYNTHETIC FABRICS
The main wash and the rinse gives best results thanks to the rotation
rhythms of the drum and to the water levels.
A gentle spin will mean that the fabrics become less creased.
RAPID PROGRAMME
The Rapid programme allows a washing cycle to be completed in just 14
minutes! This programme is particularly suited to slightly dirty cottons and
mixed fabrics.
Using the Stain Level button on the Rapid cycle will enable you to select
either a 14, 30 or 44 minute wash cycle.
When selecting the rapid programme, please note that we recommend you
use only 20% of the recommended quantities shown on the detergent pack.
For information about these programmes please refer to the programmes table.
Loading ...
Loading ...
Loading ...