Loading ...
Loading ...
Loading ...
The LED on both earpieces ash
in white & blue alternately.
Pair the earpieces with
your Bluetooth device
for the st time
Open the top cover from charging
box.
Make sure that the headset is fully
charged and powered o.
Single earpiece (Mono mode)
Take either right or Left earpiece out
from charging box for Mono use. The
earpiece will power on automatically.
There will be a voice “Power on” from
earpiece.
Note
Note
After powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
Note
Take the second Earpiece from the charging
box and they will pair each other automatically.
The earpieces stores 4 device in the memory. If
you try to pair more than 4 devices, the earliest
paired device is replaced by the new one.
Pair the earpieces with
another Bluetooth device
The earpieces are now in
pairing mode and is ready to
pair with a Bluetooth device
(e.g. a mobile phone)
Turn on the Bluetooth function
of your Bluetooth device, select
Philips TAT5505.
Turn on the Bluetooth function of
your Bluetooth device.
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
The following example shows you
how to pair the earpieces with
your Bluetooth device.
If you have another Bluetooth device
that you want to pair with the earpieces,
make sure the Bluetooth function in any
other previously paired or connected
devices are turned o.
Long touch over 5 seconds both left &
right side simultaneously with earpiece
on ear, release when Pairing voice
prompt is heard.
Enter the earpieces password
“0000” (4 zeros) if prompted. For
those Bluetooth devices featuring
Bluetooth 3.0 or higher, no need to
enter a password.
Philips TAT5505
Loading ...
Loading ...
Loading ...