Documents: Go to download!
- Owner's manual - (English)
- Parts List
- Operating Instructions
- Troubleshooting
- Warranty Information
Table of contents
Parts List
Welcome using our company air purifier. Before first use please read this manual carefully to operate the product correctly
- 1. Control panel
- 2. Outlet cover
- 3. Lamp
- 4. body
- 5. Filter
- 6. Base cover
Operating Instructions
BEFORE FIRST USE
Placing the filters
The appliance comes with all filters fitted inside, but you have to remove the packaging of the filters before you can use the appliance. Remove all filters, unpack them and place them back into the appliance as described below.
Note: Make sure you insert the filters in the correct position.
1. Put the appliance upside down on a soft cloth to avoid scratching. To open the base cover, you need to find an arrow point on the base cover corresponding the LOCK position. Turn the base cover counterclockwise from LOCK to OPEN position, then the lock is released.
2. Remove the base cover and take out the filter.
3. Remove the packaging material from the filter.
4. Put the filter back into the appliance.
5. Turn the base cover clockwise from OPEN to LOCK position, you will hear a “click” sound and the base cover is fastened.
USING THE APPLIANCE
About the control panel
The appliance comes with all filters fitted inside, but you have to remove the packaging of the filters before you can use the appliance. Remove all filters, unpack them and place them back into the appliance as described below.
Note: Make sure you insert the filters in the correct position.
1. Put the plug in the wall socket. All lights will turn on once and you hear a beep. Then the lights will turn out.
2. Press the power button to switch on the appliance. The power light
, Air Quality
light and SPEED 2
light (Medium) on the control panel will turn on.
3. SPEED adjustment
The SPEED light indicates at which SPEED the appliance is operating. Press Speed button to adjust SPEED level, there are three levels 1~3 which refers to Low, Medium and High level.
4. Auto mode
At Auto mode, the SPEED will be automatically adjusted according to Air Quality level as below:
5. Sleep mode
When you use the appliance in Sleep mode, it works quietly. Only the 
and
buttons light on while all other buttons light off. Press any other buttons (except and buttons ) to exit the sleep mode.
6. Air Quality
Light Working status (Air quality light)
The air quality light color will automatically change according to the detecting result of sensor.
Standby status (Night light mode)
- a. At standby status, press button, the amber night lights (orange) will turn on.
- b. Press button again, the light become half brightness. To turn off the night light, press the button a third time, the light cycles from Brightness, Half brightness, to Off.
7. Setting timer
1. Press to turn on or off the timer, and to cycle through timer options (2 hours, 4 hours, or 8 hours).
2. The air purifier will automatically power off once the timer is finished.
NOTE: Pressing or unplugging the air purifier will cancel the timer.
8. Filter replacement light
When indicator lights on, it means that you should check the filter if it needs to be cleaned or replaced.
Note: The filter’s lifetime is based to your house air quality and using time. Using the appliance in a humid environment will reduce the lifetime of the filter.
Clean the air purifier
Regularly clean the inside and outside of the body to prevent dust from collecting on the inside and outside.
1. Wipe away dust with a soft dry cloth from the body of the appliance.
2. Clean the air inlet and the air outlet with a soft dry cloth.
Note:
• Always unplug the appliance before you clean it.
• Never immerse the appliance in water or any other liquid.
• Never use strong or flammable cleaning agents such as bleach or alcohol to clean any part of the appliance.
• The filter is NOT washable.
Filter Replacement
It is recommended to change the air filter every 6–8 months. However, you may need to change your filter sooner or later depending on how often you use your air purifier. It is important to watch out for the following signs of expired filter:
• Increased operating noise
• Decreased airflow
• Clogged filter
• Increased presence of odors
NOTE:
• The environment in which the air purifier being used may also extend or shorten the lifetime of the the air filter. Using your air purifier in an environment of relatively high pollution may mean you will need to change the air filter more often.
• If the air pollution in your environment is very high, there is a possibility that the filters may not be completely effective and may need to be replaced before lights up.
• Remember to reset the air purifier after changing the air filter.
1. Switch off the appliance and unplug it. (a)
2. Put the appliance upside down on a soft cloth to avoid scratching. To open the base cover, you need to find an arrow point on the base cover corresponding the LOCK position, turn the base cover counterclockwise from LOCK to OPEN position, then the lock is released. (b)
3. Remove the old filter. (c)
4. Remove the packaging material of the new filter. (d)
5. Put the new filter back into the appliance. (e)
6. Turn the base cover clockwise from OPEN position to LOCK position, you will hear a “click” sound and the base cover is fastened. (f)
7. Put the plug in the wall socket and switch on the appliance again. (g)
8. Reset Filter’s lifetime. (h)
The filter lifetime should be reset if
lights up. After replacing the new filter, you need to reset the filter.
1) Plug in the air purifier and turn it on.
2) Press and hold for 3 seconds.
3) Release and the light will turn off, indicating that the reset is complete.
Filter replacement force mode
When using the air purifier in an environment of heavy pollution, the lifespan of the air filter may be significantly reduced. You can change the filters even if does not light up. Follow the steps below to perform a hard reset.
1) Replace the air filters as mentioned in the Filter Replacement section.
2) Plug in the air purifier and turn it on.
3) Press and hold for 3 seconds, and it will light up.
4) Press and hold again for 3 seconds, and it will turn off. The reset is now complete.
Storage
Unplug the power cord, then wipe the machine clean, put the appliance in the packing bag , then put it in a dry place away.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.
Troubleshooting
Problem : Air purifier does not power on
Cause:
- Unit is not plugged into an electrical outlet.
- Outlet is not working properly
- Power button has not been pressed after plugging in the air purifier.
- Power cord is damaged.
- Air purifier is not working or malfunctioning.
Solution:
- Connect the plug to a powered electrical outlet.
- Try plugging the air purifier into a different outlet.
- Press the power button once to turn on the air purifier.
- Immediately discontinue use and contact Customer Support.
Problem : Air purifier does not respond to button controls.
Cause:
- Air Purifier is not plugged into an outlet.
- Air purifier is defective or malfunctioning.
Solution:
- Connect the plug to a working electrical outlet.
- Immediately discontinue use and contact Customer Support.
Problem : Air purifier makes an unusual noise while operating.
Cause:
- Air filter is dirty.
- Filter does not fit properly.
- Foreign object might have entered into the unit.
Solution:
- Replace the air filter as instructed in the Filter Replacement section.
- Properly place filter(s) as noted in the Before first use and Filter Replacement sections.
- Immediately discontinue use and contact Customer Support. DO NOT attempt to open the air purifier
Problem : Significantly reduced airflow.
Cause:
- Filter packaging has not been removed.
- SPEED is low.
- Air filters need to be replaced.
- Not enough clearance space on all sides of the purifier.
Solution:
- Remove filer from packaging before use.
- Press
to adjust SPEED - Replace the air filters as instructed in the Filter Replacement section.
- Ensure there is at least 15 inches of clearance on all sides of the purifier.
Problem : Poor air purification effect.
Cause:
- Air filters need to be replaced.
- Room is too large for the air purifier's applicable area.
- Air inlet or outlet is blocked.
- Filters not properly placed in housing.
Solution:
- Replace the air filters as instructed in the Filter Replacement section.
- Ensure the room is smaller than 280 square feet.
- Remove objects that block air inlet or outlet.
- Properly place filters as noted in the Before first use and Filter Replacement sections.
Problem : Filter reset button lights up after replacing the air filter.
Cause: The air purifier has been reset incorrectly.
Solution:See the Filter Replacement section on how to properly reset the unit.
Problem : Air purifier turns on and off unexpectedly.
Cause: Air purifier is defective or malfunctioning.
Solution: See the Filter Replacement section on how to properly reset the unit.
Problem : Air Purifier beeps repeatedly after being powered on or plugged in.
Cause:Air purifier is defective or malfunctioning.
Solution: Immediately discontinue use and contact Customer Support. DO NOT attempt to open the air purifier for self-servicing.
Warranty Information
Vremi offers a 12-month warranty on all of our products purchased new and unused from Vremi LLC or an authorized reseller, with an original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacturing, parts or workmanship during the Warranty Period. The warranty does not apply where damage is caused by other factors, including but without limitation: (a) normal wear and tear; (b) abuse, mishandling, accident or failure to follow operating instructions; (c) exposure to liquid or infiltration of foreign particles; (d) servicing or modification of the product other than by Vremi. These are our general terms for the warranty service, but we always urge our customers to reach out to us with any issue, regardless of warranty terms. If you experience an issue with a Vremi product, please contact us at [email protected], and we will do our best to resolve it for you.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This product may not cause harmful interference and
(2) This product must accept any interference received, including interference that may cause undesired operations.
