Loading ...
Loading ...
Loading ...
Operating Your Heater
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. Please
follow the below instructions.
WARNING:In orderto avoid overheating orfire, donot cover the heater.
WARNING: Keep all objects at least 1 metre from the front, sides and rear
of the appliance.
WARNING: Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING:Neverleave thisheaterunattended when inuse.
Ensure heaterison a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off
position, insertthe powerplug into the mains outletand switch on.
CAUTION: Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will overheat
the plug and socket andcould result infire.
HEATER CONTROL PANEL
The control switch positions are:
“0” = OFF
= Fan
“I” = Low Heat
“II” = High Heat
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwise until you reach the maximum position.
2. When the room reaches a temperature that is comfortable for you, slowly turn
the knob anti-clockwiseuntil theheater justturns off (you will hear a click).
3. The heater will now cycle on and off to maintain the comfort level you have set.
4. Take note of this setting position for future use.
Loading ...
Loading ...
Loading ...