Loading ...
Loading ...
Loading ...
(206,1)
北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
automatically on or off depending on the
level of the ambient light.
“
” position
The headlights are all off.
NOTE
. The sensitivity of the auto on/off
headlights can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details. Also, you can change
the settings using the multi-function
display (color LCD). For details, refer to
“Auto light sensor setting” F3-62.
. If the light control switch is in the
“AUTO” position and the headlights do
not turn on when it becomes dark
outside, turn the light switch to the
“
” position. If this happens, have
your vehicle inspected by your
SUBARU dealer as soon as possible.
! Auto-on/off wiper-linked headlights
(models with auto on/off headlights)
S03AH0106
While the light control switch is in the
“AUTO” position, the headlights will auto-
matically turn on when the windshield
wipers operate several times. The head-
lights will automatically turn off when the
wipers stop.
The ON/OFF setting of this function can be
changed by a SUBARU dealer. Consult
your SUBARU dealer for details.
! Welcome lighting function (if
equipped)
S03AH0103
The welcome lighting function turns on
some exterior lights for smooth approach-
ing to or exiting from the vehicle at night or
in dark places.
The function is activated while all of the
following conditions are met.
. The light control switch is in the “AUTO”
position.
. It is dark enough to turn on the auto on/
off headlights.
When approaching:
While the welcome lighting function is
activated, some exterior lights will auto-
matically illuminate when unlocking the
doors by using the remote keyless entry
system.
The exterior lights will remain illuminated
for 30 seconds
*1
and then turn off. How-
ever, if any of the following operations are
performed, the exterior lights will turn off.
. Locking the doors using the keyless
access function (if equipped) or the remote
keyless entry system
. Turning the light control switch to a
position other than “AUTO”
. Turning the ignition switch to the “ON”
position
When exiting:
While the welcome lighting function is
activated, some exterior lights will remain
illuminated even when either of the follow-
ing operations is performed.
. Turning the push-button ignition switch
to the “OFF” status (models with “keyless
access with push-button start system”)
. Pulling out the key from the ignition
switch (models without “keyless access
with push-button start system”)
The exterior lights will turn off under any of
the following conditions.
. 3 minutes have passed since the
exterior lights were illuminated by the
welcome lighting function.
. 30 seconds have passed since the door
was opened and closed.
*1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedures using the key-
less access function (if equipped) or the
remote keyless entry system is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking procedure
twice again.
Instruments and controls/Light control switch
3-66
Loading ...
Loading ...
Loading ...