Loading ...
Loading ...
Loading ...
en Cleaning and maintenance
8
Changing the activated charcoal filter (only in
circulating-air mode)
To ensure effective odour removal, the filters must be
serviced regularly.
The activated charcoal filters must be replaced at least
every 3to 5months.
Notes
The activated charcoal filters are not included with
the appliance. Activated charcoal filters are available
from specialist retailers, from our after-sales service
or from our online shop.
The activated charcoal filters cannot be cleaned or
reactivated.
1. Remove the metal grease filter; see above.
2. Turn the old activated charcoal filters and pull them
from the holder. ¨
3. Push the new activated charcoal filters onto the
holder and turn. ©
Cleaning the metal grease filter
Notes
Do not use any aggressive, acidic or alkaline
cleaning agents.
When cleaning the metal mesh grease filters, also
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
The metal mesh grease filters can be cleaned in the
dishwasher or by hand.
By hand:
Note: You can use a special grease solvent for
stubborn dirt. It can be ordered via the Online Shop.
Soak the metal mesh grease filters in a hot soapy
solution.
Clean the filters with a brush and then rinse them
thoroughly.
Leave the metal mesh grease filters to drain.
In the dishwasher:
Note: If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has
no effect on the function of the metal mesh grease
filters.
Do not clean heavily soiled metal mesh grease filters
together with utensils.
Place the metal mesh grease filters loosely in the
dishwasher. The metal mesh grease filters must not
be wedged in.
Installing the metal grease filter
With the lock facing the front, insert the metal grease
filter into the underside of the appliance and engage the
lock.
Note: When pushing the filter in, make sure the lock
engages. Otherwise, the metal grease filter may fall and
damage the hob.
Loading ...
Loading ...
Loading ...