Loading ...
Loading ...
- Do not use abrasive cleaning agents or
anti-bacterial cleaners. Do not place
components directly on surfaces that
have been cleaned with anti-bacterial
cleaners.
- Plastic material properties may
be aected by sterilizing and high
temperatures.
This can aect the t of the cap.
- Inspect before each use and pull the
feeding nipple in all directions.Throw
away any part at the rst signs of
damage or weakness.
- Do not alter the product or parts of it
in any way. This may result in unsafe
functioning of the product.
Nipple
- For hygiene reasons, we recommend
replacing nipples after 3 months.
- Keep nipples in a dry, covered
container.
- Do not leave a feeding nipple in
direct sunlight or heat, or leave in
disinfectant (‘sterilizing solution‘) for
longer than recommended,
as this may weaken the nipple.
Before rst use
- Disassemble all parts, clean and
sterilize the product by placing in
boiling water for 5 minutes or sterilize
by using a Philips Avent sterilizer. This
is to ensure hygiene.
- During sterilizing with boiling water,
prevent the cup or other parts
from touching the side of the pan.
This can cause irreversible product
deformation, defect or damage that
Philips cannot be held liable for.
Assembly
When you assemble the bottle, make
sure you place the cap vertically onto
the bottle so that the nipple sits upright
(see image for more details). To remove
the cap, place your hand over the cap
and your thumb in the dimple of the
cap. The nipple is easier to assemble if
you wriggle it upwards instead of pulling
Loading ...
Loading ...
Loading ...