Loading ...
Loading ...
Loading ...
14
Starting Your Air Conditioner—Rotary Control
1. Set vent control. See “Vent Control (on some models).”
2. Select the fan speed. See “Functions.”
3. Set temperature. See “Temperature.”
Vent Control (on some models)
1. Set the Vent control to CLOSE for maximum continuous
cooling. The Vent control set to OPEN allows you to draw
stale or smoky air from the room.
■ Open—to exhaust room air to the outside.
■ Close—to circulate room air.
NOTE: The Vent control will function only when the Fan Speed is
operating.
Functions
Set Functions to the desired setting. When the air conditioner is
operating at Quiet Cool, Hi Cool, or Super Cool, the fan circulates
air continuously.
■ Super Cool—for maximum cooling
■ Hi Cool—for normal to maximum cooling (depending on
model)
■ Quiet Cool—for sleeping comfort
■ Fan—to move air continuously without cooling
Temperature
Turn the TEMPERATURE control to a mid-setting. Adjust the air
conditioner's performance by turning the Temperature control
clockwise for maximum cooling. For less cooling, turn the
TEMPERATURE control counterclockwise. Experiment to find the
setting that suits you best.
Changing Air Direction
Use the Air Swing button on the air conditioner control panel or
the Swing button on the remote control to direct air left or right.
Use the tab to direct air up, down or straight ahead.
Normal Sounds
When your air conditioner is operating normally, you may hear
sounds such as:
■ Droplets of water hitting the condenser, causing a pinging or
clicking sound. The water droplets help cool the condenser.
■ Air movement from the fan.
■ Clicks from the thermostat cycle.
■ Vibrations or noise due to poor wall or window construction.
■ A high-pitched hum or pulsating noise caused by the modern
high-efficiency compressor cycling on and off.
A. Tab
SWING
A
Loading ...
Loading ...
Loading ...