Loading ...
Mounting Bracket
AD-SPK1PRO 20210114v1
2/2
Installation Instructions
1 Remove the protective covering from the Base
Foam Pad and apply the adhesive side to the flat
side of the Bracket.
2 Remove the protective covering from the (2) Foam
Foot Pads and apply the adhesive side next to the
metal mounts protruding out from the Bracket.
3 Wrap the (2) Hook And Loop Straps around the
Bracket, going under the metal mounts. Note: the
hole in the middle of the Bracket can be used for
a power cable depending on how the bracket will
be used. A hole would likely need to be punched in
the foam pad for this use case.
4 Use the (2) Adjustable Straps to secure the
Bluetooth speaker to the Bracket by wrapping them
over the bottom of the bracket on the ends of the
speaker where the circumference is the widest. This
will ensure the Adjustable Straps can be tightened
properly and they will not get in the way of the
buttons.