Loading ...
Loading ...
Loading ...
40
GB
You can check the recording level value
with the peak meter of the display
window. Adjust the level closer to
–12 dB, into a range that is appropriate
for your sound source.
If “ ” is displayed, press
. on the
control button to adjust the recording
level down so that “ ” is not
displayed, to prevent sound distortion.
Press and hold . or > on the
control button to change the REC Level
value continuously. The sound level is
also displayed as a number right side of
the level meter.
6 Make other settings according to the
state of recording.
If necessary, utilize the “LIMITER”
setting in the menu (page 91).
7 To start recording, press z REC/
PAUSE.
8 To stop recording, press x STOP.
P Notes
• In the manual recording mode, you cannot
record with the VOR function (page 45).
• In the manual recording mode, you cannot
review the current recording, even if you
press
N/ENT.
Adding a recording to a
previously recorded file
OVER indicator
Adjust the maximum
level of the sound to
about –12 dB.
N/ENT
z REC/PAUSE
x STOP
v, V
Loading ...
Loading ...
Loading ...