Loading ...
Loading ...
Loading ...
ENGLISH
16
ASSEMBLING AND PREPARING
Attaching the TV to a desk
(Depending on model)
The TV should be attached to a desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
TYPE 1
4-Screws
(Not provided as parts of the product)
Desk
Stand
NOTE
Screw: M5 x L (*L: Table depth + 8~10 mm)
ex) Table depth: 15mm, Screw: M5 x 25
TYPE 2
2-Screws, 2-Washers, 2-Nuts
(provided as parts of the product)
Desk
Stand
Adjusting the angle of the TV to suit view
Swivel screw in position C sets the default swivel angle
to 20°.Moving the screw to position A on the bottom of
the stand will allow a swivel angle range of 45°. Moving
the screw to position B will allow a swivel angle range of
90°.
20˚20˚
A
B
C
Only one swivel screw is included and
attached to position C.
NOTE
Removing the swivel fixing screw will allow the
set to rotate 360°.
When adjusting the angle of the TV, watch out
for your fingers.
- Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may
fall, causing damage or injury.
CAUTION
Loading ...
Loading ...
Loading ...