Loading ...
Loading ...
Loading ...
26
Cleaning of the Mop Nozzle
Clean the mop nozzle as below.
1
Separate the nozzle from the product and turn the
nozzle over.
2
Attach the crevice tool to the main body of the
vacuum to remove any foreign objects from its
base.
3
Remove the remaining foreign objects using a wet
wipe or a tissue.
4
Always check the nozzle’s jockey wheel for build up
of debris such as hair or dust which can cause it not
to rotate freely. If this occurs it can damage hard
floors.
※
Foreign matter remaining on the nozzle may result in
a bad smell.
WARNING
•
Make sure to separate the nozzle from the main body
or separate the battery before cleaning.
Otherwise the mop attachment plate may rotate and
result in injury.
CAUTION
•
Do not clean or submerge the nozzle with water. It
may result in product damage.
Drying the water tank
Open the 2 caps on the side of the water tank and shake
the water tank to remove the remaining water.
Drying thoroughly for over 24 hours in a well-ventilated
location with no direct sunlight is effective to remove
moisture from the water tank.
Please note
•
When cleaning is completed, always empty the water
in the water tank.
Otherwise the water may be contaminated and give
off a bad smell.
CAUTION
•
Turn the direction of the cap to prevent the cap of the
water tank from being closed.
•
Do not separate the cap of the water tank completely.
•
Do not add detergent, vinegar or baking soda to the
water tank when washing.
Loading ...
Loading ...
Loading ...