Camera User Guide
English
Switching Between Pages
Click the button on the top of the screen.
ç
Contents
: return to the Contents.
● Make sure you read this guide, including the “Safety
Precautions” (
=
18) section, before using the camera.
● Reading this guide will help you learn to use the camera
properly.
● Store this guide safely so that you can use it in the future.
© CANON INC. 2016 CT0-D073-000-F101-A
2
ç Contents
Initial Information
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera
Battery Pack
NB-11LH*
Battery Charger
CB-2LF/CB-2LFE
Wrist Strap
Lens Cap
(with cord)
* Do not peel off the adhesive covering from a battery pack.
● Printed matter is also included.
● A memory card is not included (
=
3).
Before Use
3
ç Contents
Compatible Memory Cards
The following memory cards (commercially available) can be
used, regardless of capacity.
● SD memory cards*
● SDHC memory cards*
● SDXC memory cards*
* Cards conforming to SD standards. However, not all memory cards have
been veried to work with the camera.
4
ç Contents
Preliminary Notes and Legal
Information
● Take and review some test shots initially to make sure the
images were recorded correctly. Please note that Canon Inc.,
its subsidiaries and afliates, and its distributors are not liable
for any consequential damages arising from any malfunction
of a camera or accessory, including memory cards, that result
in the failure of an image to be recorded or to be recorded in a
way that is machine readable.
● Images recorded by the camera shall be for personal use.
Refrain from unauthorized recording that infringes on copyright
law, and note that even for personal use, photography
may contravene copyright or other legal rights at some
performances or exhibitions, or in some commercial settings.
● The camera warranty is valid only in the area of purchase. In
case of camera problems while abroad, return to the area of
purchase before contacting a Canon Customer Support Help
Desk.
● Although the screen is produced under extremely high-
precision manufacturing conditions and more than 99.99%
of the pixels meet design specications, in rare cases some
pixels may be defective or may appear as red or black dots.
This does not indicate damage. This does not affect recorded
images either.
● When the camera is used over an extended period, it may
become warm. This does not indicate damage.
5
ç Contents
Conventions in This Guide
● In this guide, icons are used to represent the corresponding
camera buttons on which they appear, or which they resemble.
● The following camera buttons and controls are represented by
icons. Also, the numbers in parenthesis indicates the numbers
of the buttons and controls on “Part Names” (
=
6).
[ ] Up button (9) on back
[ ] Left button (13) on back
[ ] Right button (11) on back
[ ] Down button (12) on back
● Shooting modes and on-screen icons and text are indicated in
brackets.
●
: Important information you should know.
●
: Notes and tips for expert camera use.
●
=
xx: Pages with related information (in this example, “xx”
represents a page number).
● The symbols “
Still Images” and “ Movies” below titles
indicate how the function is used—whether for still images or
movies.
● Instructions in this guide apply to the camera under default
settings.
● For convenience, all supported memory cards are simply
referred to as the “memory card”.
6
ç Contents
Part Names
(
3
)
(
6
)
(
8
) (
9
)
(
7
)
(
1
) (
2
) (
3
) (
4
) (
5
)
(
10
)
(1) Zoom lever
Shoot Only: [
(telephoto)] /
[
(wide angle)]
Playback: [
(magnify)] /
[
(index)]
(2) Shutter button
(3) Strap mount
(4) Power button
(5) Flash
(6) Lamp
(7) Lens
(8) Tripod socket
(9) Memory card/battery cover
(10) [
] (N-Mark)*
* Used with NFC feature (
=
181).
7
ç Contents
(
7
)
(
8
)
(
10
)
(
11
)
(
12
)
(
1
) (
5
) (
6
)
(
4
) (
14
)(
13
) (
15
)
(
3
)(
2
)
(
9
)
(1) Speaker
(2) Microphone
(3) AV OUT (Audio/video output) /
DIGITAL terminal
(4) Screen (Monitor)
(5) Indicator (back)
(6) [
(Playback)] button
(7) Movie button
(8) [
(Auto)] button
(9) [
(Exposure
compensation)] /
[
(Single-image erase)] / Up
button
(10) FUNC./SET (Function/Set)
button
(11) [
(Flash)] / Right button
(12) [
(Information)] / Down
button
(13) [
(Macro)] / Left button
(14) [
(Wi-Fi)] button
(15) [
(Menu)] button
8
ç Contents
Table of Contents
Before Use
Initial Information ................ 2
Package Contents...........................2
Compatible Memory Cards ............3
Preliminary Notes and Legal
Information ......................................4
Conventions in This Guide ............5
Part Names ......................................6
Common Camera Operations ......15
Safety Precautions .......................18
Basic Guide
Basic Operations ............... 25
Initial Preparations .......................26
Attaching Accessories .......26
Holding the Camera ...........27
Charging the Battery
Pack ..................................... 27
Inserting the Battery Pack
and Your Memory Card
(Commercially Available) ...30
Removing the Battery Pack
and Memory Card ...........32
Setting the Date and
Time .....................................33
Changing the Date and
Time ................................35
Display Language ..............37
Trying the Camera Out .................39
Shooting (Smart Auto) .......39
Viewing ................................44
Erasing Images ............... 46
Advanced Guide
1 Camera Basics ............... 47
On/Off.............................................48
Power-Saving Features (Auto
Power Down) ......................49
Power Saving in Shooting
Mode ............................... 49
Power Saving in Playback
Mode ............................... 49
Shutter Button...............................50
Shooting Display Options ............ 52
Using the FUNC. Menu .................54
Using the Menu Screen ................56
On-Screen Keyboard ....................58
Indicator Display ........................... 59
Clock ..............................................60
2 Auto Mode ...................... 61
Shooting with Camera-Determined
Settings..........................................62
Shooting (Smart Auto) .......62
Still Images/Movies ......... 66
Still Images .....................67
Movies ............................68
Scene Icons ........................69
Image Stabilization Icons ..71
9
ç Contents
On-Screen Frames .............73
Common, Convenient Features...74
Zooming In Closer on
Subjects (Digital Zoom) .....74
Using the Self-Timer ..........76
Using the Self-Timer to
Avoid Camera Shake ......77
Customizing the Self-
Timer ...............................78
Adding a Date Stamp .........80
Continuous Shooting ......... 81
Image Customization Features....83
Changing the Aspect
Ratio ....................................83
Changing Image Resolution
(Size) .................................... 84
Guidelines for Choosing
Resolution Based on Paper
Size (for 4:3 Images) ......84
Changing Movie Image
Quality .................................85
Helpful Shooting Features ...........86
Displaying Grid Lines ........86
Magnifying the Area in
Focus ................................... 87
Customizing Camera Operation ..89
Deactivating the AF-Assist
Beam ...................................89
Deactivating the Red-Eye
Reduction Lamp .................90
Changing the Image Display
Style after Shots ................. 91
Changing the Image Display
Period after Shots ...........91
Changing the Screen
Displayed after Shots......92
3 Other Shooting Modes .. 94
Brightness / Color Customization
(Live View Control) .......................95
Specic Scenes ............................96
Applying Special Effects .............. 98
Shooting with a Fish-Eye
Lens Effect (Fish-Eye
Effect) ..................................99
Shots Resembling
Miniature Models (Miniature
Effect) ................................100
Playback Speed and
Estimated Playback Time
(for One-Minute Clips) ..101
Shooting with a Toy
Camera Effect (Toy Camera
Effect) ................................103
Shooting in
Monochrome ..................... 104
Special Modes for Other
Purposes .....................................105
Using the Face Self-
Timer..................................105
Shooting Long Exposures
(Long Shutter) ..................107
4 P Mode ..........................109
Shooting in Program AE ([P]
Mode) ...........................................110
Image Brightness (Exposure) .... 111
Adjusting Image
Brightness (Exposure
Compensation) ................. 111
10
ç Contents
Changing the Metering
Method ..............................112
Changing the ISO
Speed ................................113
Correcting Image Brightness
(i-Contrast) ........................ 114
Image Colors ............................... 115
Adjusting White
Balance .............................115
Custom White
Balance .........................116
Changing Image Color Tones
(My Colors) .......................117
Custom Color ................ 119
Shooting Range and Focusing .. 120
Shooting Close-Ups
(Macro) ..............................120
Shooting Distant Subjects
(Innity) .............................121
Digital Tele-Converter ......122
Changing the AF Frame
Mode ..................................123
Center ...........................123
Face AiAF .....................124
Choosing Subjects to Focus
On (Tracking AF) ..........125
Shooting with Servo
AF .................................127
Changing the Focus
Setting ...............................129
Flash ............................................130
Changing the Flash
Mode ..................................130
Auto ..............................130
On .................................131
Slow Synchro ................ 131
Off .................................131
Other Settings .............................132
Changing the Compression
Ratio (Image Quality) .......132
Changing the IS Mode
Settings .............................133
Shooting Movies with
Subjects at the Same
Size Shown before
Shooting........................134
5 Playback Mode ............. 135
Viewing ........................................136
Switching Display
Modes ................................139
Overexposure Warning (for
Image Highlights) .......... 140
Histogram .....................140
GPS Information
Display ..........................140
Browsing and Filtering
Images .........................................142
Navigating through Images in
an Index ............................. 142
Finding Images Matching
Specied Conditions .......143
Image Viewing Options ..............145
Magnifying Images ........... 145
Viewing Slideshows .........147
Changing Slideshow
Settings ......................... 148
Auto Playback of Related
Images (Smart Shufe) ....149
11
ç Contents
Protecting Images.......................151
Using the Menu ................152
Choosing Images
Individually .......................152
Selecting a Range ............154
Protecting All Images at
Once ..................................156
Clearing All Protection at
Once .............................156
Erasing Images ...........................157
Erasing Multiple Images at
Once ..................................157
Choosing a Selection
Method .......................... 158
Choosing Images
Individually ....................158
Selecting a Range ........159
Specifying All Images at
Once .............................160
Rotating Images .......................... 161
Using the Menu ................162
Deactivating Auto
Rotation ............................. 163
Tagging Images as Favorites .....164
Using the Menu ................164
Editing Still Images.....................166
Resizing Images ...............166
Cropping ...........................168
Changing Image Color Tones
(My Colors) .......................170
Correcting Image Brightness
(i-Contrast) ........................171
Correcting Red-Eye .......... 173
Editing Movies ............................175
6 Wi-Fi Functions ............ 178
Available Wi-Fi Features ............179
Sending Images to a
Smartphone ................................. 180
Sending Images to an NFC-
Compatible Smartphone .. 181
Connecting via NFC When
Camera Is Off or in Shooting
Mode ............................. 182
Connecting via NFC When
Camera Is in Playback
Mode ............................. 187
Adding a Smartphone ...... 189
Using Another Access
Point ..................................194
Previous Access Points ...195
Saving Images to a Computer ...196
Preparing to Register a
Computer ..........................196
Installing the Software ..196
Conguring the Computer
for a Wi-Fi Connection
(Windows Only) ............198
Saving Images to a
Connected Computer ....... 200
Conrming Access Point
Compatibility .................200
Using WPS-Compatible
Access Points ...............202
Connecting to Listed Access
Points ............................ 207
Previous Access
Points ............................ 208
12
ç Contents
Sending Images to a Registered
Web Service ................................209
Registering Web
Services ............................209
Registering CANON iMAGE
GATEWAY ....................210
Registering Other Web
Services ........................214
Uploading Images to Web
Services ............................215
Printing Images Wirelessly from a
Connected Printer.......................218
Sending Images to Another
Camera.........................................221
Image Sending Options..............224
Sending Multiple
Images ............................... 224
Selecting a Range ........225
Sending Images Tagged as
Favorites .......................226
Notes on Sending
Images ............................... 227
Choosing the Number of
Recording Pixels (Image
Size) ...................................228
Adding Comments ...........229
Sending Images Automatically
(Image Sync) ...............................230
Initial Preparations ........... 230
Preparing the Camera ..230
Preparing the
Computer ......................231
Sending Images ................ 232
Viewing Images Sent
via Image Sync on Your
Smartphone ..................234
Using a Smartphone to View
Camera Images and Control the
Camera.........................................235
Geotagging Images on the
Camera ..............................236
Shooting Remotely ..........236
Editing or Erasing Wi-Fi
Settings........................................239
Editing Connection
Information .......................239
Changing a Device
Nickname ...................... 241
Erasing Connection
Information .................... 241
Changing the Camera
Nickname ..........................242
Returning the Wi-Fi Settings
to Default ........................... 244
7 Setting Menu ................ 246
Adjusting Basic Camera
Functions.....................................247
Silencing Camera
Operations ........................247
Adjusting the Volume.......248
Hiding Hints and Tips ......248
Date and Time ...................249
World Clock ......................249
Lens Retraction Timing ...251
Using Eco Mode ...............251
Power-Saving
Adjustment .......................252
13
ç Contents
Screen Brightness ...........253
Hiding the Start-Up
Screen ...............................254
Formatting Memory
Cards .................................254
Low-Level Formatting ...256
File Numbering .................257
Date-Based Image
Storage ..............................258
Metric / Non-Metric
Display ..............................258
Checking Certication
Logos ................................259
Display Language ............259
Adjusting Other Settings . 260
Restoring Defaults ...........260
8 Accessories .................. 261
System Map ................................. 262
Optional Accessories .................264
Power Supplies ................264
Flash Unit ..........................265
Other Accessories ............265
Printer ................................ 266
Photo Storage ................... 266
Using Optional Accessories ......267
Playback on a TV .............. 267
Using the Software .....................269
Connect to a Computer Using
a Cable ..............................269
Checking Your Computer
Environment..................269
Installing the Software ..269
Saving Images to a
Computer ..........................270
Printing Images ........................... 273
Easy Print .......................... 273
Conguring Print
Settings .............................276
Cropping Images before
Printing..........................277
Choosing Paper Size and
Layout before Printing ..278
Available Layout
Options .........................279
Printing ID Photos ......... 280
Printing Movie Scenes ..... 281
Movie Printing Options..282
Adding Images to the Print
List (DPOF) .......................283
Conguring Print
Settings ......................... 283
Setting Up Printing for
Individual Images .......... 285
Setting Up Printing for a
Range of Images ..........286
Setting Up Printing for All
Images ..........................286
Clearing All Images from the
Print List ........................ 287
Printing Images Added to
the Print List (DPOF) ....287
Adding Images to a
Photobook ........................288
Choosing a Selection
Method .......................... 288
Adding Images
Individually ....................289
14
ç Contents
Adding All Images to a
Photobook.....................290
Removing All Images from a
Photobook.....................290
9 Appendix ...................... 291
Troubleshooting..........................292
On-Screen Messages .................300
On-Screen Information ............... 305
Shooting (Information
Display) .............................305
Battery Level ................. 306
Playback (Detailed
Information Display) ........307
Summary of Movie Control
Panel.............................309
Functions and Menu Tables ....... 310
Functions Available in Each
Shooting Mode .................310
FUNC. Menu ......................313
Shooting Tab.....................319
Set Up Tab ......................... 325
Playback Tab.....................326
Print Tab ............................327
Playback Mode FUNC.
Menu ..................................327
Handling Precautions ................. 328
Specications .............................329
Camera ..............................329
Number of Shots/Recording
Time, Playback Time ....333
Shooting Range ............333
Number of Shots per
Memory Card ................334
Recording Time per Memory
Card ..............................335
Battery Pack NB-11LH .. 336
Battery Charger CB-2LF/
CB-2LFE .......................336
Index ............................................337
Wi-Fi (Wireless LAN)
Precautions .................................342
Radio Wave Interference
Precautions ....................... 343
Security Precautions .......344
Trademarks and
Licensing.......................346
Disclaimer .....................347
15
ç Contents
Common Camera Operations
Shoot
● Use camera-determined settings (Auto Mode)
-
=
62
Shooting people well
Portraits
(
=
96)
Matching specic scenes
Low Light
(
=
96)
Fireworks
(
=
96)
Applying special effects
Vivid Colors
(
=
98)
Poster Effect
(
=
98)
Fish-Eye Effect
(
=
99)
Miniature Effect
(
=
100)
Toy Camera Effect
(
=
103)
Monochrome
(
=
104)
16
ç Contents
● While adjusting image settings (Live View Control)
-
=
95
● Focus on faces
-
=
62,
=
96,
=
124
● Without using the ash (Flash Off)
-
=
62
● Include yourself in the shot (Self-Timer)
-
=
76,
=
105
● Add a date stamp
-
=
80
View
● View images (Playback Mode)
-
=
136
● Automatic playback (Slideshow)
-
=
147
● On a TV
-
=
267
● On a computer
-
=
269
● Browse through images quickly
-
=
142
● Erase images
-
=
157
18
ç Contents
Safety Precautions
● Before using the product, ensure that you read the safety
precautions described below. Always ensure that the product is
used correctly.
● The safety precautions noted here are intended to prevent
you and other persons from being injured or incurring property
damage.
● Be sure to also check the guides included with any separately
sold accessories you use.
Warning
Denotes the possibility of serious injury
or death.
● Do not trigger the ash in close proximity to people’s eyes.
This could damage your eyesight. In particular, remain at least 1
meter (3.3 feet) away from infants when using the ash.
● Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord
around a child’s neck may result in asphyxiation.
● Use only recommended power sources.
● Do not disassemble, alter, or apply heat to the product.
● Do not peel off the adhesive covering, if the battery pack has it.
● Avoid dropping or subjecting the product to severe impacts.
● Do not touch the interior of the product if it is broken, such as
when dropped.
19
ç Contents
● Stop using the product immediately if it emits smoke or a
strange smell, or otherwise behaves abnormally.
● Do not use organic solvents such as alcohol, benzine, or
thinner to clean the product.
● Avoid contact with liquid, and do not allow liquid or foreign
objects inside.
This could result in electrical shock or re.
If the product gets wet, or if liquid or foreign objects get inside,
remove the battery pack/batteries or unplug immediately.
● Do not look through the viewnder or the lens (if your model
has a viewnder or interchangeable lens) at intense light
sources such as the sun on a clear day or an intense articial
light source.
This could damage your eyesight.
● When using products with interchangeable lenses, do not
leave the camera with a lens attached or a lens itself out in
direct sunlight without the lens cap on.
This may cause a re to start.
● Do not touch the product during thunderstorms if it is plugged
in.
This could result in electrical shock or re. Immediately stop using
the product and distance yourself from it.
● Use only the recommended battery pack/batteries.
● Do not place the battery pack/batteries near or in direct ame.
This may cause the battery pack/batteries to explode or leak,
resulting in electrical shock, re, or injuries. If leaking battery
electrolyte comes into contact with eyes, mouth, skin, or clothing,
immediately ush with water.
20
ç Contents
● If the product uses a battery charger, note the following
precautions.
- Remove the plug periodically and, using a dry cloth, wipe
away any dust and dirt that has collected on the plug, the
exterior of the power outlet, and the surrounding area.
- Do not insert or remove the plug with wet hands.
- Do not use the equipment in a manner that exceeds the
rated capacity of the electrical outlet or wiring accessories.
Do not use if the plug is damaged or not fully inserted in the
outlet.
- Do not allow dust or metal objects (such as pins or keys) to
contact the terminals or plug.
- Do not cut, damage, alter, or place heavy items on the power
cord, if your product uses one.
This could result in electrical shock or re.
● Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere
with the operation of electronic instruments and other devices.
Exercise adequate caution when using the product in places
where use of electronic devices is restricted, such as inside
airplanes and medical facilities.
● Do not allow the camera to maintain contact with skin for
extended periods.
Even if the camera does not feel hot, this may cause low-
temperature burns, manifested in redness of the skin or blistering.
Use a tripod in hot places, or if you have poor circulation or
insensitive skin.
21
ç Contents
Caution
Denotes the possibility of injury.
● When carrying the product by the strap, be careful not to bang
it, subject it to strong impacts or shocks, or let it get caught on
other objects.
● Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
● Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
● When using the ash, be careful not to cover it with your
ngers or clothing.
This could result in burns or damage to the ash.
● Avoid using, placing, or storing the product in the following
places:
- Places subject to direct sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty places
These could cause leakage, overheating, or an explosion of the
battery pack/batteries, resulting in electrical shock, re, burns, or
other injuries.
Overheating and damage may result in electrical shock, re,
burns, or other injuries.
22
ç Contents
● The slideshow transition effects may cause discomfort when
viewed for prolonged periods.
● When using optional lenses, lens lters, or lter adapters (if
applicable), be sure to attach these accessories rmly.
If the lens accessory becomes loose and falls off, it may crack,
and the shards of glass may lead to cuts.
● On products that raise and lower the ash automatically, make
sure to avoid pinching your ngers with the lowering ash.
This could result in injury.
Caution
Denotes the possibility of property
damage.
● Do not aim the camera at intense light sources, such as the
sun on a clear day or an intense articial light source.
Doing so may damage the image sensor or other internal
components.
● When using the camera on a sandy beach or at a windy
location, be careful not to allow dust or sand to enter the
camera.
● On products that raise and lower the ash automatically, do not
push the ash down or pry it open.
This may cause the product to malfunction.
● Wipe off any dust, grime, or other foreign matter on the ash
with a cotton swab or cloth.
The heat emitted from the ash may cause foreign matter to
smoke or the product to malfunction.
23
ç Contents
● Remove and store the battery pack/batteries when you are not
using the product.
Any battery leakage that occurs may cause product damage.
● Before you discard the battery pack/batteries, cover the
terminals with tape or other insulators.
Contacting other metal materials may lead to re or explosions.
● Unplug any battery charger used with the product when not in
use. Do not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it
to overheat and distort, resulting in re.
● Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or
explosion, resulting in product damage or re.
● If your product uses multiple batteries, do not use batteries that
have different levels of charge together, and do not use old and
new batteries together. Do not insert the batteries with the +
and – terminals reversed.
This may cause the product to malfunction.
● Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
● When putting the camera in your bag, ensure that hard objects
do not come into contact with the screen. Also close the screen
(so that it faces the body), if your product’s screen closes.
24
ç Contents
● Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
25
ç Contents
Basic Operations
Basic information and instructions, from initial preparations
to shooting and playback
Basic Guide
26
ç Contents
Initial Preparations
Prepare for shooting as follows.
Attaching Accessories
1
Attach the strap.
● Thread the end of the strap
through the strap mount (1), and
then pull the other end of the
strap through the loop on the
threaded end (2).
2
Attach the lens cap.
● Remove the lens cap from the
lens momentarily, thread the end
of the cord through the strap
mount (1), and then pull the lens
cap through the loop (2).
● Always remove the lens cap
before turning the camera on.
● Keep the lens cap on the lens
when the camera is not in use.
(
2
)
(
1
)
(
1
)
(
2
)
27
ç Contents
Holding the Camera
● Place the strap around your wrist.
● When shooting, keep your arms
close to your body and hold the
camera securely to prevent it
from moving. If you have raised
the ash, do not rest your ngers
on it.
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be
sure to charge the battery pack initially, because the camera is not
sold with the battery pack charged.
1
Insert the battery pack.
● After aligning the marks on the
battery pack and charger, insert
the battery pack by pushing it in
(1) and down (2).
(
1
)
(
2
)
28
ç Contents
2
Charge the battery pack.
● CB-2LF: Flip out the plug (1) and
plug the charger into a power
outlet (2).
● CB-2LFE: Plug the power cord
into the charger, then plug the
other end into a power outlet.
● The charging lamp turns orange,
and charging begins.
● When charging is nished, the
lamp turns green.
3
Remove the battery pack.
● After unplugging the battery
charger, remove the battery pack
by pushing it in (1) and up (2).
● To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
● For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
CB-2LFE
(
2
)
(
1
)
CB-2LF
(
1
)
(
2
)
29
ç Contents
● For details on charging time and the number of shots and
recording time possible with a fully charged battery pack, see
“Number of Shots/Recording Time, Playback Time” (
=
333).
● Charged battery packs gradually lose their charge, even when
they are not used. Charge the battery pack on (or immediately
before) the day of use.
● The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a
commercially available adapter for the plug. Never use an
electrical transformer designed for traveling, which may damage
the battery pack.
30
ç Contents
Inserting the Battery Pack and Your Memory
Card (Commercially Available)
Insert the included battery pack and a memory card (commercially
available).
Note that before using a memory card that is new or has been
formatted in another device, you should format the memory card
with this camera (
=
254).
1
Open the cover.
● Slide the cover (1) and open it (2).
2
Insert the battery pack.
● Holding the battery pack with the
terminals (1) facing as shown,
press the battery lock (2) in the
direction of the arrow and insert
the battery pack until the lock
clicks shut.
● If you insert the battery pack
facing the wrong way, it cannot be
locked into the correct position.
Always conrm that the battery
pack is facing the right way and
locks when inserted.
(
1
)
(
2
)
(
1
)
(
2
)
31
ç Contents
3
Check the card’s write-
protect switch and insert the
memory card.
● Recording is not possible on
memory cards with a write-protect
switch when the switch is in the
locked position. Slide the switch
to the unlocked position.
● Insert the memory card with the
label (1) facing as shown until it
clicks into place.
● Make sure the memory card
is facing the right way when
you insert it. Inserting memory
cards facing the wrong way may
damage the camera.
4
Close the cover.
● Lower the cover (1) and hold it
down as you slide it, until it clicks
into the closed position (2).
● For guidelines on how many shots or hours of recording can be
saved on one memory card, see “Number of Shots per Memory
Card” (
=
334).
(1)
(
1
)
(
2
)
32
ç Contents
Removing the Battery Pack and Memory Card
Removing the Battery Pack
● Open the cover and press the
battery lock in the direction of the
arrow.
● The battery pack will pop up.
Removing the Memory Card
● Push the memory card in until it
clicks, and then slowly release it.
● The memory card will pop up.
33
ç Contents
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time]
screen is displayed when you turn the camera on. Information you
specify this way is recorded in image properties when you shoot,
and it is used when you manage images by shooting date or print
images showing the date.
You can also add a date stamp to shots, if you wish (
=
80).
1
Turn the camera on.
● Press the power button.
● The [Date/Time] screen is
displayed.
2
Set the date and time.
● Press the [ ][ ] buttons to
choose an item.
● Press the [
][ ] buttons to
specify the date.
● When nished, press the [
]
button.
34
ç Contents
3
Specify your home time zone.
● Press the [ ][ ] buttons to
choose your home time zone.
4
Finish the setup process.
● Press the [ ] button when
nished. After a conrmation
message, the setting screen is no
longer displayed.
● To turn off the camera, press the
power button.
● Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
● To set daylight saving time (1 hour ahead), choose [ ] in step 2
and then choose [
] by pressing the [ ][ ] buttons.
35
ç Contents
Changing the Date and Time
Adjust the date and time as follows.
1
Access the menu screen.
● Press the [ ] button.
2
Choose [Date/Time].
● Move the zoom lever to choose
the [ ] tab.
● Press the [
][ ] buttons to
choose [Date/Time], and then
press the [ ] button.
3
Change the date and time.
● Follow step 2 in “Setting the Date
and Time” (
=
33) to adjust the
settings.
● Press the [
] button to
close the menu screen.
36
ç Contents
● There is a build-in date/time battery (backup battery) in the
camera. Date/time settings can be retained for about 3 weeks
after the battery pack is removed.
● The date/time battery will be charged in about 4 hours once you
insert a charged battery pack, even if the camera is left off.
● Once the date/time battery is depleted, the [Date/Time] screen will
be displayed when you turn the camera on. Set the correct date
and time as described in “Setting the Date and Time” (
=
33).
37
ç Contents
Display Language
Change the display language as needed.
1
Enter Playback mode.
● Press the [ ] button.
2
Access the setting screen.
● Press and hold the [ ] button,
and then immediately press the
[ ] button.
3
Set the display language.
● Press the [ ][ ][ ][ ] buttons
to choose a language, and then
press the [ ] button.
● Once the display language has
been set, the setting screen is no
longer displayed.
38
ç Contents
● The current time is displayed if you wait too long in step 2 after
pressing the [
] button before you press the [ ] button.
In this case, press the [
] button to dismiss the time display and
repeat step 2.
● You can also change the display language by pressing the
[
] button and choosing [Language ] on the [ ] tab.
39
ç Contents
Trying the Camera Out
Still Images
Movies
Follow these instructions to turn the camera on, shoot still images
or movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specic
scenes, simply let the camera determine the subject and shooting
conditions.
1
Turn the camera on.
● Press the power button.
● The startup screen is displayed.
2
Enter [ ] mode.
● Press the [ ] button several
times until [ ] is displayed.
● Aim the camera at the subject.
The camera will make a slight
clicking noise as it determines the
scene.
● Icons representing the scene
and image stabilization mode are
displayed in the upper right of the
screen.
40
ç Contents
● Frames displayed around any
detected subjects indicate that
they are in focus.
3
Compose the shot.
● To zoom in and enlarge the
subject, move the zoom lever
toward [ ] (telephoto), and to
zoom away from the subject,
move it toward [ ] (wide angle).
41
ç Contents
4
Shoot.
Shooting Still Images
1) Focus.
● Press the shutter button lightly,
halfway down. The camera beeps
twice after focusing, and AF
frames are displayed to indicate
image areas in focus.
● If [Raise the ash] is displayed,
lift the ash with your nger to
prepare it for use. If you prefer not
to use the ash, push it down with
your nger, into the camera.
42
ç Contents
2) Shoot.
● Press the shutter button all the
way down.
● As the camera shoots, a shutter
sound is played, and in low-light
conditions when you have raised
the ash, it res automatically.
● Keep the camera still until the
shutter sound ends.
● After displaying your shot, the
camera will revert to the shooting
screen.
Recording Movies
1) Start recording.
● Press the movie button. The
camera beeps once as recording
begins, and [ Rec] is displayed
with the elapsed time (1).
● Black bars are displayed on the
top and bottom edges of the
screen, and the subject is slightly
enlarged. The black bars indicate
image areas not recorded.
● Frames displayed around any
detected faces indicate that they
are in focus.
● Once recording begins, take your
nger off the movie button.
(
1
)
43
ç Contents
2) Finish recording.
● Press the movie button again
to stop recording. The camera
beeps twice as recording stops.
44
ç Contents
Viewing
After shooting images or movies, you can view them on the screen
as follows.
1
Enter Playback mode.
● Press the [ ] button.
● Your last shot is displayed.
2
Choose an image.
● To view the previous image, press
the [ ] button. To view the next
image, press the [ ] button.
● To access this screen (Scroll
Display mode), press and hold
the [
][ ] buttons for at least one
second. In this mode, press the
[
][ ] buttons to browse through
images.
● To return to single-image display,
press the [
] button.
45
ç Contents
● Movies are identied by a [ ]
icon. To play movies, go to step 3.
3
Play movies.
● Press the [ ] button, press the
[ ][ ] buttons to choose [ ], and
then press the [ ] button again.
● Playback now begins, and after
the movie is nished, [
] is
displayed
● To adjust the volume, press the
[
][ ] buttons.
● To switch to Shooting mode from Playback mode, press the
shutter button halfway.
46
ç Contents
Erasing Images
You can choose and erase unneeded images one by one. Note
that erased images cannot be recovered. Be sure that you want to
erase images before using this option.
1
Choose an image to erase.
● Press the [ ][ ] buttons to
choose an image.
2
Erase the image.
● Press the [ ] button.
● After [Erase?] is displayed, press
the [
][ ] buttons to choose
[Erase], and then press the [ ]
button.
● The current image is now erased.
● To cancel erasure, press the
[
][ ] buttons to choose [Cancel],
and then press the [ ] button.
● You can choose multiple images to erase at once (
=
157).
47
ç Contents
Advanced Guide
Camera Basics
Other basic operations and more ways to enjoy your
camera, including shooting and playback options
1
48
ç Contents
On/Off
Shooting Mode
● Press the power button to turn
the camera on and prepare for
shooting.
● To turn the camera off, press the
power button again.
Playback Mode
● Press the [ ] button to turn the
camera on and view your shots.
● To turn the camera off, press the
[
] button again.
● To switch to Playback mode from Shooting mode, press the [ ]
button.
● To switch to Shooting mode from Playback mode, press the
shutter button halfway (
=
50).
● The lens will be retracted after about one minute once the camera
is in Playback mode. You can turn the camera off when the lens is
retracted by pressing the [
] button.
49
ç Contents
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically
deactivates the screen (Display Off) and then turns itself off after a
specic period of inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute
of inactivity. In about two more minutes, the lens is retracted and
the camera turns itself off. To activate the screen and prepare for
shooting when the screen is off but the lens is still out, press the
shutter button halfway (
=
50).
Power Saving in Playback Mode
The camera turns itself off automatically after about ve minutes
of inactivity.
● You can deactivate Auto Power Down and adjust the timing of
Display Off, if you prefer (
=
252).
● Power saving is not active while the camera is connected to other
devices via Wi-Fi (
=
178), or when connected to a computer
(
=
270).
50
ç Contents
Shutter Button
To ensure your shots are in focus, always begin by holding the
shutter button halfway down, and once the subject is in focus,
press the button all the way down to shoot.
In this manual, shutter button operations are described as
pressing the button halfway or all the way down.
1
Press halfway. (Press lightly
to focus.)
● Press the shutter button halfway.
The camera beeps twice, and
frames are displayed around
image areas in focus.
2
Press all the way down.
(From the halfway position,
press fully to shoot.)
● The camera shoots, as a shutter
sound is played.
● Keep the camera still until the
shutter sound ends.
51
ç Contents
● Images may be out of focus if you shoot without initially pressing
the shutter button halfway.
● Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
53
ç Contents
● Screen brightness is automatically increased by the night view
function when you are shooting under low light, making it easier
to check how shots are composed. However, on-screen image
brightness may not match the brightness of your shots. Note that
any on-screen image distortion or jerky subject motion will not
affect recorded images.
● For playback display options, see “Switching Display Modes”
(
=
139).
54
ç Contents
Using the FUNC. Menu
Congure commonly used functions through the FUNC. menu as
follows.
Note that menu items and options vary depending on the shooting
mode (
=
313) or playback mode (
=
327).
1
Access the FUNC. menu.
● Press the [ ] button.
2
Choose a menu item.
● Press the [ ][ ] buttons to
choose a menu item (1), and then
press the [ ] or [ ] button.
● Available options (2) are listed
next to menu items, on the right.
● Depending on the menu item,
functions can be specied simply
by pressing the [
] or [ ] button,
or another screen is displayed for
conguring the function.
(
1
)
(
2
)
55
ç Contents
3
Choose an option.
● Press the [ ][ ] buttons to
choose an item.
● Options labeled with a [
] icon
can be congured by pressing the
[ ] button.
● To return to the menu items,
press the [
] button.
4
Finish the setup process.
● Press the [ ] button.
● The screen before you pressed
the [
] button in step 1 is
displayed again, showing the
option you congured.
● To undo any accidental setting changes, you can restore the
camera’s default settings (
=
260).
56
ç Contents
Using the Menu Screen
Congure a variety of camera functions through the menu screen
as follows. Menu items are grouped by purpose on tabs, such as
shooting [ ], playback [ ], and so on. Note that available menu
items vary depending on the selected shooting or playback mode
(
=
319 –
=
327).
1
Access the menu screen.
● Press the [ ] button.
2
Choose a tab.
● Move the zoom lever to choose
a tab.
● After you have pressed the
[
][ ] buttons to choose a tab
initially, you can switch between
tabs by pressing the [ ][ ]
buttons.
57
ç Contents
3
Choose a menu item.
● Press the [ ][ ] buttons to
choose an item.
● For menu items with options
not shown, rst press the [
] or
[ ] button to switch screens, and
then press the [ ][ ] buttons to
select the menu item.
● To return to the previous screen,
press the [
] button.
4
Choose an option.
● Press the [ ][ ] buttons to
choose an option.
5
Finish the setup process.
● Press the [ ] button to
return to the screen displayed
before you pressed the [ ]
button in step 1.
● To undo any accidental setting changes, you can restore the
camera’s default settings (
=
260).
58
ç Contents
On-Screen Keyboard
Use the on-screen keyboard to enter information for Wi-Fi
connections (
=
178). Note that the length and type of
information you can enter varies depending on the function you
are using.
Entering Characters
● Press the [ ][ ][ ][ ] buttons
to choose a character, and then
press the [ ] button to enter it.
Moving the Cursor
● Choose [ ] or [ ] and press the
[ ] button.
Deleting Characters
● Choose [ ] and press the [ ]
button. The previous character
will be deleted.
Conrming Input and Returning
to the Previous Screen
● Press the [ ] button.
59
ç Contents
Indicator Display
When the following conditions occur, the camera’s indicator
(
=
6) blinks green.
- Connecting to a computer (
=
270)
- Display off (
=
49,
=
251,
=
252)
- Starting up, recording/reading a memory card
- Any kind of connecting
- When shooting in Long Shutter mode (
=
107)
- Connecting to Wi-Fi/Receiving data
● When the indicator blinks green, never turn the camera off, open
the memory card/battery cover, or shake or jolt the camera. These
actions may corrupt images or damage the camera or memory
card.
60
ç Contents
Clock
You can check the current time.
● Press and hold the [
] button.
● The current time appears.
● If you hold the camera vertically
while using the clock function,
it will switch to vertical display.
Press the [
][ ] buttons to
change the display color.
● Press the [
] button again to
cancel the clock display.
● When the camera is off, press and hold the [ ] button, then
press the power button to display the clock.
61
ç Contents
Auto Mode
Convenient mode for easy shots with greater control over
shooting
2
62
ç Contents
Shooting with Camera-
Determined Settings
For fully automatic selection of the optimal settings for specic
scenes, simply let the camera determine the subject and shooting
conditions.
Shooting (Smart Auto)
Still Images
Movies
1
Turn the camera on.
● Press the power button.
● The startup screen is displayed.
2
Enter [ ] mode.
● Press the [ ] button several
times until [ ] is displayed.
● Aim the camera at the subject.
The camera will make a slight
clicking noise as it determines the
scene.
● Icons representing the scene
and image stabilization mode are
displayed in the upper right of the
screen (
=
69,
=
71).
63
ç Contents
● Frames displayed around any
detected subjects indicate that
they are in focus.
3
Compose the shot.
● To zoom in and enlarge the
subject, move the zoom lever
toward [ ] (telephoto), and to
zoom away from the subject,
move it toward [ ] (wide angle).
(A zoom bar (1) showing the
zoom position is displayed.)
● To zoom in or out quickly, move
the zoom lever all the way toward
[
] (telephoto) or [ ] (wide
angle), and to zoom in or out
slowly, move it just a little in the
desired direction.
(
1
)
64
ç Contents
4
Shoot.
Shooting Still Images
1) Focus.
● Press the shutter button halfway.
The camera beeps twice after
focusing, and AF frames are
displayed to indicate image areas
in focus.
● Several AF frames are displayed
when multiple areas are in focus.
● If [Raise the ash] is displayed,
lift the ash with your nger to
prepare it for use. If you prefer not
to use the ash, push it down with
your nger, into the camera.
65
ç Contents
2) Shoot.
● Press the shutter button all the
way down.
● As the camera shoots, a shutter
sound is played, and in low-light
conditions when you have raised
the ash, it res automatically.
● Keep the camera still until the
shutter sound ends.
● After displaying your shot, the
camera will revert to the shooting
screen.
Recording Movies
1) Start recording.
● Press the movie button. The
camera beeps once as recording
begins, and [ Rec] is displayed
with the elapsed time (1).
● Black bars are displayed on the
top and bottom edges of the
screen, and the subject is slightly
enlarged. The black bars indicate
image areas not recorded.
● Frames displayed around any
detected faces indicate that they
are in focus.
● Once recording begins, take your
nger off the movie button.
(
1
)
66
ç Contents
2) Resize the subject and
recompose the shot as
needed.
● To resize the subject, repeat the
operations in step 3.
However, note that the sound
of camera operations will be
recorded. Note that movies shot
at zoom factors shown in blue will
look grainy.
● When you recompose shots, the
focus, brightness, and colors will
be automatically adjusted.
3) Finish recording.
● Press the movie button again
to stop recording. The camera
beeps twice as recording stops.
● Recording will stop automatically
when the memory card becomes
full.
Still Images/Movies
● If the camera is turned on while the [ ] button is held down, the
camera will no longer sound. To activate sounds again, press the
[
] button and choose [Mute] on the [ ] tab, and then
press the [
][ ] buttons to choose [Off].
67
ç Contents
Still Images
● A blinking [ ] icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
● If your shots are dark despite the ash ring, move closer to the
subject. For details on the ash range, see “Camera” (
=
329).
● The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
range of focus (shooting range), see “Shooting Range” (
=
333).
● To reduce red-eye and to assist in focusing, the lamp may be lit
when shooting in low-light conditions.
● A blinking [
] icon displayed when you attempt to shoot
indicates that shooting is not possible until the ash has nished
recharging. Shooting can resume as soon as the ash is ready,
so either press the shutter button all the way down and wait, or
release it and press it again.
● Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
● You can change how long images are displayed after shots
(
=
91).
68
ç Contents
Movies
● Before shooting a movie, lower the ash with your nger. Be
careful not to touch the microphone (1) when shooting a movie.
Leaving the ash raised, or blocking the microphone may prevent
audio from being recorded or may cause the recording to sound
mufed.
● Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
● Once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of signicant
camera shake. To shoot subjects at the same size shown before
shooting, adjust the image stabilization setting (
=
133).
(
1
)
● Audio recording is monaural.
69
ç Contents
Scene Icons
Still Images
Movies
In [ ] mode, shooting scenes determined by the camera are
indicated by the icon displayed, and corresponding settings are
automatically selected for optimal focusing, subject brightness,
and color.
Background
When Shooting People
Icon
Background
Color
People
In
Motion*
1
Shadows
on Face*
1
Bright
Gray
Bright and Backlit
–
With Blue Sky
Light Blue
Blue Sky and
Backlit
–
Spotlights
Dark BlueDark
Dark, Using Tripod
*
2
– –
70
ç Contents
Background
When Shooting Other
Subjects
Icon
Background
Color
Other
Subjects
In
Motion*
1
At Close
Range
Bright
Gray
Bright and Backlit
With Blue Sky
Light Blue
Blue Sky and
Backlit
Sunsets – Orange
Spotlights
Dark Blue
Dark
Dark, Using
Tripod
*
2
– –
*1 Not displayed for movies.
*2 Displayed in dark scenes when the camera is held still, as when
mounted on a tripod.
● The scene icon may not match actual shooting conditions, or it
may not be possible to shoot with your expected effect, color, or
brightness. If such a case occurs, it is recommended that you
shoot in [
] mode (
=
109).
71
ç Contents
Image Stabilization Icons
Still Images
Movies
Optimal image stabilization for the shooting conditions is
automatically applied (Intelligent IS). Additionally, the following
icons are displayed in [ ] mode.
Image stabilization for still images (Normal)
Image stabilization for still images when panning
(Panning)*
Image stabilization for angle camera shake and shift
camera shake when shooting with macro (Hybrid IS). In
movies, [ ] is displayed, and [ ] can further stabilize
the image.
Image stabilization for movies, reducing strong camera
shake, as when shooting while walking (Dynamic)
Image stabilization for slow camera shake, such as when
shooting movies at telephoto (Powered)
No image stabilization, because the camera is mounted
on a tripod or held still by other means. However,
during movie recording, [ ] is displayed, and image
stabilization to counteract wind or other sources of
vibration is used (Tripod IS).
* Displayed when you pan, following moving subjects with the camera.
When you follow subjects moving horizontally, image stabilization only
counteracts vertical camera shake, and horizontal stabilization stops.
Similarly, when you follow subjects moving vertically, image stabilization
only counteracts horizontal camera shake.
73
ç Contents
On-Screen Frames
Still Images
Movies
A variety of frames are displayed once the camera detects
subjects you are aiming the camera at.
● A white frame is displayed around the subject (or person’s
face) determined by the camera to be the main subject, and
gray frames are displayed around other detected faces.
Frames follow moving subjects within a certain range to
keep them in focus. However, if the camera detects subject
movement, only the white frame will remain on the screen.
● When you are pressing the shutter button halfway and the
camera detects subject movement, a blue frame is displayed,
and the focus and image brightness are constantly adjusted
(Servo AF).
● Depending on the shooting conditions and subject, no frames
may be displayed, frames may not be displayed around desired
subjects, or frames may be displayed on the background or
similar areas. If such a case occurs, it is recommended that you
shoot in [
] mode (
=
109).
74
ç Contents
Common, Convenient Features
Still Images
Movies
Zooming In Closer on Subjects (Digital
Zoom)
When distant subjects are too far away to enlarge using the optical
zoom, use digital zoom for up to about 168x enlargement.
1
Move the zoom lever toward
[ ].
● Hold the lever until zooming
stops.
● Zooming stops at the largest
zoom factor before the image
becomes noticeably grainy, which
is then indicated on the screen.
2
Move the zoom lever toward
[ ] again.
● The camera zooms in even closer
on the subject.
● (1) is the current zoom factor.
(
1
)
75
ç Contents
● Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change
depending on the zoom range.
- White range: optical zoom range where the image will not
appear grainy.
- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear
grainy.
● Because the blue range will not be available at some recording
pixel settings (
=
84), the maximum zoom factor can be
achieved by following step 1.
● To deactivate digital zoom, choose MENU (
=
56) > [ ] tab >
[Digital Zoom] > [Off].
76
ç Contents
Using the Self-Timer
Still Images
Movies
With the self-timer, you can include yourself in group photos or
other timed shots. The camera will shoot about 10 seconds after
you press the shutter button.
1
Congure the setting.
● Press the [ ] button, choose [ ]
in the menu, and then choose [ ]
(
=
54).
● Once the setting is complete, [
]
is displayed.
2
Shoot.
● For Still Images: Press the shutter
button halfway to focus on the
subject, and then press it all the
way down.
● For Movies: Press the movie
button.
77
ç Contents
● Once you start the self-timer, the
lamp will blink and the camera will
play a self-timer sound.
● Two seconds before the shot, the
blinking and sound will speed up.
(The lamp will remain lit in case
the ash res.)
● To cancel shooting after you have
triggered the self-timer, press the
[
] button.
● To restore the original setting,
choose [
] in step 1.
Using the Self-Timer to Avoid Camera Shake
Still Images
Movies
This option delays shutter release until about two seconds after
you have pressed the shutter button. If the camera is unsteady
while you are pressing the shutter button, it will not affect your
shot.
● Follow step 1 in “Using the Self-
Timer” (
=
76) and choose [ ].
● Once the setting is complete, [
]
is displayed.
● Follow step 2 in “Using the Self-
Timer” (
=
76) to shoot.
78
ç Contents
Customizing the Self-Timer
Still Images
Movies
You can specify the delay (0 – 30 seconds) and number of shots
(1 – 10).
1
Choose [ ].
● Following step 1 in “Using the
Self-Timer” (
=
76), choose [ ]
and press the [ ] button
immediately.
2
Congure the setting.
● Press the [ ][ ] buttons to
choose [Delay] or [Shots].
● Press the [
][ ] buttons to
choose a value, and then press
the [ ] button.
● Once the setting is complete, [
]
is displayed.
● Follow step 2 in “Using the Self-
Timer” (
=
76) to shoot.
● For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
79
ç Contents
● When you specify multiple shots, image brightness and white
balance are determined by the rst shot. More time is required
between shots when the ash res or when you have specied
to take many shots. Shooting will stop automatically when the
memory card becomes full.
● When a delay longer than two seconds is specied, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the ash res.)
80
ç Contents
Adding a Date Stamp
Still Images
Movies
The camera can add the shooting date to images, in the lower-
right corner.
However, note that date stamps cannot be edited or removed, so
conrm beforehand that the date and time are correct (
=
33).
1
Congure the setting.
● Press the [ ] button,
choose [Date Stamp ] on the
[ ] tab, and then choose the
desired option (
=
56).
● Once the setting is complete, [
]
is displayed.
2
Shoot.
● As you take shots, the camera
adds the shooting date or time to
the lower-right corner of images.
● To restore the original setting,
choose [Off] in step 1.
● Date stamps cannot be edited or removed.
81
ç Contents
● Shots taken without adding a date stamp can be printed with one
as follows.
However, adding a date stamp this way to images that already
have one may cause it to be printed twice.
- Print using printer functions (
=
273)
- Use camera DPOF print settings (
=
283) to print
Continuous Shooting
Still Images
Movies
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Camera”
(
=
329).
1
Congure the setting.
● Press the [ ] button, choose [ ]
in the menu, and then choose
[ ] (
=
54).
● Once the setting is complete, [
]
is displayed.
2
Shoot.
● Hold the shutter button all the way
down to shoot continuously.
82
ç Contents
● During continuous shooting, focus and exposure are locked at the
position/level determined when you pressed the shutter button
halfway.
● Cannot be used with the self-timer (
=
76).
● Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
● As more shots are taken, shooting may slow down.
● Shooting may slow down if the ash res.
83
ç Contents
Image Customization Features
Changing the Aspect Ratio
Still Images
Movies
Change the image aspect ratio (ratio of width to height) as follows.
● Press the [
] button, choose
[ ] in the menu, and choose the
desired option (
=
54).
● Once the setting is complete,
the screen aspect ratio will be
updated.
● To restore the original setting,
repeat this process but choose
[
].
Same aspect ratio as widescreen HDTVs.
Same aspect ratio as 35mm lm. Used for printing images
at 5 x 7-inch or postcard sizes.
Native aspect ratio of the camera screen. Used for display
on standard-denition televisions or similar display
devices. Also used for printing images at 3.5 x 5-inch or
A-series sizes.
Square aspect ratio.
84
ç Contents
Changing Image Resolution (Size)
Still Images
Movies
Choose from 4 levels of image resolution, as follows. For
guidelines on how many shots at each recording pixel setting can
t on a memory card, see “Number of Shots per Memory Card”
(
=
334).
● Press the [
] button, choose
[ ] in the menu, and choose the
desired option (
=
54).
● The option you congured is now
displayed.
● To restore the original setting,
repeat this process but choose
[
].
Guidelines for Choosing Resolution Based on
Paper Size (for 4:3 Images)
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x 16.5 – 5.8 x 8.3 in.)
3.5 x 5 in., 5 x 7 in., Postcard
For e-mailing and similar purposes
85
ç Contents
Changing Movie Image Quality
Still Images
Movies
2 image quality settings are available. For guidelines on the
maximum movie length at each level of image quality that will
t on a memory card, see “Recording Time per Memory Card”
(
=
335).
● Press the [
] button, choose
[ ] in the menu, and choose the
desired option (
=
54).
● The option you congured is now
displayed.
● To restore the original setting,
repeat this process but
choose [
].
Image
Quality
Resolution Frame Rate Details
1280 x 720 25 fps For shooting in HD
640 x 480 30 fps
For shooting in standard
denition
● In [ ] mode, black bars are displayed on the top and bottom
edges of the screen. The black bars indicate image areas not
recorded.
86
ç Contents
Helpful Shooting Features
Displaying Grid Lines
Still Images
Movies
Grid lines can be displayed on the screen for vertical and
horizontal reference while shooting.
● Press the [
] button,
choose [Grid Lines] on the
[ ] tab, and then choose [On]
(
=
56).
● Once the setting is complete, grid
lines are displayed on the screen.
● To restore the original setting,
repeat this process but choose
[Off].
● Grid lines are not recorded in your shots.
87
ç Contents
Magnifying the Area in Focus
Still Images
Movies
You can check the focus by pressing the shutter button halfway,
which will enlarge the portion of the image in focus in the AF
frame.
1
Congure the setting.
● Press the [ ] button,
choose [AF-Point Zoom] on the
[ ] tab, and then choose [On]
(
=
56).
2
Check the focus.
● Press the shutter button halfway.
The face detected as the main
subject is now magnied.
● To restore the original setting,
choose [Off] in step 1.
88
ç Contents
● The area in focus is not magnied in the following cases when the
shutter button is pressed halfway.
- If a face was not detected, if the person is too close to the
camera and their face is too large for the screen, or if the
camera detects subject movement
- When digital zoom is used (
=
74)
- When Tracking AF is used (
=
125)
- When a TV is used as a display (
=
267)
89
ç Contents
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen
as follows.
For instructions on menu functions, see “Using the Menu Screen”
(
=
56).
Deactivating the AF-Assist Beam
Still Images
Movies
The lamp normally lights up to help you focus when you press the
shutter button halfway in low-light conditions. If you prefer, you can
deactivate the lamp.
● Press the [
] button,
choose [AF-assist Beam] on the
[ ] tab, and then choose [Off]
(
=
56).
● To restore the original setting,
repeat this process but choose
[On].
90
ç Contents
Deactivating the Red-Eye Reduction Lamp
Still Images
Movies
A lamp lights up to reduce red-eye when the ash is used in low-
light shots. If you prefer, you can deactivate the lamp.
1
Access the [Flash Settings]
screen.
● Press the [ ] button,
choose [Flash Settings] on the
[ ] tab, and then press the [ ]
button (
=
56).
2
Congure the setting.
● Choose [Red-Eye Lamp], and
then choose [Off] (
=
56).
● To restore the original setting,
repeat this process but choose
[On].
91
ç Contents
Changing the Image Display Style after
Shots
Still Images
Movies
You can change how long images are displayed and what
information is displayed immediately after shooting.
Changing the Image Display Period after Shots
1
Access the [Review image
after shooting] screen.
● Press the [ ] button,
choose [Review image after
shooting] on the [ ] tab, and
then press the [ ] button
(
=
56).
2
Congure the setting.
● Press the [ ][ ] buttons to
choose [Display Time]. Press
the [ ][ ] buttons to choose the
desired option.
● To restore the original setting,
repeat this process but choose
[Quick].
92
ç Contents
Quick Displays images only until you can shoot again.
2 sec.,
4 sec.,
8 sec.
Displays images for the specied time. Even while
the shot is displayed, you can take another shot
by pressing the shutter button halfway again.
Hold
Displays images until you press the shutter button
halfway.
Off No image display after shots.
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold]
(=
91).
2
Congure the setting.
● Press the [ ][ ] buttons to
choose [Display Info]. Press the
[ ][ ] buttons to choose the
desired option.
● To restore the original setting,
repeat this process but choose
[Off].
Off Displays only the image.
Detailed
Displays shooting details (
=
307).
93
ç Contents
● When [Display Time] (
=
91) is set to [Off] or [Quick], [Display
Info] is set to [Off] and cannot be changed.
● By pressing the [
] button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] are not changed. You can also erase
images by pressing the [
] button, or protect (
=
151) or tag
images as favorites (
=
164) by pressing the [ ] button.
94
ç Contents
Other Shooting Modes
Shoot more effectively in various scenes, and take shots
enhanced with unique image effects or captured using
special functions
3
95
ç Contents
Brightness / Color Customization
(Live View Control)
Still Images
Movies
Image brightness or colors when shooting can be easily
customized as follows.
1
Enter [ ] mode.
● Press the [ ] button several
times until [ ] is displayed.
2
Congure the setting.
● Press the [ ] button to access
the setting screen. Press the
[ ][ ] buttons to choose a
setting item, and then press the
[ ][ ] buttons to adjust the value
as you watch the screen.
● Press the [
] button.
3
Shoot.
Brightness
For brighter images, adjust the level to the right,
and for darker images, adjust it to the left.
Color
For more vivid images, adjust the level to the right,
and for more subdued images, adjust it to the left.
Tone
For a warm, reddish tone, adjust the level to the
right, and for a cool, bluish tone, adjust it to the left.
96
ç Contents
Specic Scenes
Choose a mode matching the shooting scene, and the camera will
automatically congure the settings for optimal shots.
1
Choose a shooting mode.
● Press the [ ] button several
times until [ ] is displayed.
● Press the [
] button, choose
[ ] in the menu, and choose
the desired option (
=
54).
2
Shoot.
Shooting Portraits (Portrait)
Still Images
Movies
● Take shots of people with a
softening effect.
Shooting under Low Light
(Low Light)
Still Images
Movies
● Shoot with minimal camera and
subject shake even in low-light
conditions.
97
ç Contents
Shooting Fireworks
(Fireworks)
Still Images
Movies
● Vivid shots of reworks.
● In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (
=
133).
● [ ] mode resolution is [ ] (2,560 x 1,920 pixels) and cannot be
changed.
● In [
] mode, although no frames are displayed when you press
the shutter button halfway, optimal focus is still determined.
98
ç Contents
Applying Special Effects
Add a variety of effects to images when shooting.
1
Choose a shooting mode.
● Follow step 1 in “Specic Scenes”
(
=
96) to choose a shooting
mode.
2
Shoot.
Shooting in Vivid Colors
(Super Vivid)
Still Images
Movies
● Shots in rich, vivid colors.
Posterized Shots (Poster
Effect)
Still Images
Movies
● Shots that resemble an old poster
or illustration.
● In [ ] and [ ] modes, try taking some test shots rst, to make
sure you obtain the desired results.
99
ç Contents
Shooting with a Fish-Eye Lens Effect
(Fish-Eye Effect)
Still Images
Movies
Shoot with the distorting effect of a sh-eye lens.
1
Choose [ ].
● Follow step 1 in “Specic Scenes”
(
=
96) and choose [ ].
2
Choose an effect level.
● Press the [ ] button, press the
[ ][ ] buttons to choose an effect
level, and then press the [ ]
button.
● A preview is shown of how your
shot will look with the effect
applied.
3
Shoot.
● Try taking some test shots rst, to make sure you obtain the
desired results.
100
ç Contents
Shots Resembling Miniature Models
(Miniature Effect)
Still Images
Movies
Creates the effect of a miniature model, by blurring image areas
above and below your selected area.
You can also make movies that look like scenes in miniature
models by choosing the playback speed before the movie is
recorded. People and objects in the scene will move quickly during
playback. Note that sound is not recorded.
1
Choose [ ].
● Follow step 1 in “Specic Scenes”
(
=
96) and choose [ ].
● A white frame is displayed,
indicating the image area that will
not be blurred.
2
Choose the area to keep in
focus.
● Press the [ ] button.
● Move the zoom lever to resize
the frame, and press the [
][ ]
buttons to move it.
101
ç Contents
3
For movies, choose the
movie playback speed.
● Press the [ ] button, and
then press the [ ][ ] buttons to
choose the speed.
4
Return to the shooting
screen and shoot.
● Press the [ ] button to
return to the shooting screen, and
then shoot.
Playback Speed and Estimated Playback Time
(for One-Minute Clips)
Speed Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
Movies are played back at 30 fps.
● The zoom is not available when shooting movies. Be sure to set
the zoom before shooting.
● Try taking some test shots rst, to make sure you obtain the
desired results.
102
ç Contents
● To switch the orientation of the frame to vertical, press the [ ][ ]
buttons in step 2. To return the frame to horizontal orientation,
press the [
][ ] buttons.
● To move the frame when it is in horizontal orientation, press the
[
][ ] buttons, and to move the frame when it is in vertical
orientation, press the [
][ ] buttons.
● Holding the camera vertically will change the orientation of the
frame.
● Movie image quality is [
] at an aspect ratio of [ ] and [ ]
at an aspect ratio of [
] (
=
83). These quality settings cannot
be changed.
103
ç Contents
Shooting with a Toy Camera Effect (Toy
Camera Effect)
Still Images
Movies
This effect makes images resemble shots from a toy camera by
vignetting (darker, blurred image corners) and changing the overall
color.
1
Choose [ ].
● Follow step 1 in “Specic Scenes”
(
=
96) and choose [ ].
2
Choose a color tone.
● Press the [ ] button, press the
[ ][ ] buttons to choose a color
tone, and then press the [ ]
button.
● A preview is shown of how your
shot will look with the effect
applied.
3
Shoot.
Standard Shots resemble toy camera images.
Warm Images have a warmer tone than with [Standard].
Cool Images have a cooler tone than with [Standard].
● Try taking some test shots rst, to make sure you obtain the
desired results.
104
ç Contents
Shooting in Monochrome
Still Images
Movies
Shoot images in black and white, sepia, or blue and white.
1
Choose [ ].
● Follow step 1 in “Specic Scenes”
(
=
96) and choose [ ].
2
Choose a color tone.
● Press the [ ] button, press the
[ ][ ] buttons to choose a color
tone, and then press the [ ]
button.
● A preview is shown of how your
shot will look with the effect
applied.
3
Shoot.
B/W Black and white shots.
Sepia Sepia tone shots.
Blue Blue and white shots.
105
ç Contents
Special Modes for Other
Purposes
Using the Face Self-Timer
Still Images
Movies
The camera will shoot about two seconds after detecting that the
face of another person (such as the photographer) (
=
124) has
entered the shooting area. This is useful when including yourself
in group photos or similar shots.
1
Choose [ ].
● Follow step 1 in “Specic Scenes”
(
=
96) and choose [ ].
2
Compose the shot and press
the shutter button halfway.
● Make sure a green frame is
displayed around the face you
focus on and white frames around
other faces.
106
ç Contents
3
Press the shutter button all
the way down.
● The camera now enters shooting
standby mode, and [Look straight
at camera to start count down] is
displayed.
● The lamp blinks and the self-timer
sound is played.
4
Join the subjects in the
shooting area and look at the
camera.
● After the camera detects a new
face, the lamp blinking and
self-timer sound will speed up.
(When the ash res, the lamp
will remain lit.) About two seconds
later, the camera will shoot.
● To cancel shooting after you have
triggered the self-timer, press the
[
] button.
● Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
● To change the number of shots, after choosing [
] in step 1,
press the [
] button, choose the number of shots by pressing the
[
][ ] buttons, and then press the [ ] button.
107
ç Contents
Shooting Long Exposures (Long Shutter)
Still Images
Movies
Specify a shutter speed of 1 – 15 seconds to shoot long
exposures. In this case, mount the camera on a tripod or take
other measures to prevent camera shake.
1
Choose [ ].
● Follow step 1 in “Specic Scenes”
(
=
96) and choose [ ].
2
Choose the shutter speed.
● Press the [ ] button, press the
[ ][ ] buttons to choose the
shutter speed, and then press the
[ ] button.
3
Check the exposure.
● Press the shutter button halfway
to view the exposure for your
selected shutter speed.
4
Shoot.
108
ç Contents
● On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your
shots.
● With shutter speeds of 1.3 seconds or slower, there will be a
delay before you can shoot again, as the camera processes
images to reduce noise.
● Set [IS Mode] to [Off] when using a tripod or other means to
secure the camera (
=
133).
● If the ash res, your shot may be overexposed. In this case, set
the ash to [
] and shoot again (
=
130).
109
ç Contents
P Mode
More discerning shots, in your preferred shooting style
● Instructions in this chapter apply to the camera when
set to [
] mode.
● [
]: Program AE; AE: Auto Exposure.
● Before using a function introduced in this chapter
in modes other than [
], make sure the function is
available in that mode (
=
310).
4
110
ç Contents
Shooting in Program AE ([P]
Mode)
Still Images
Movies
You can customize many function settings to suit your preferred
shooting style.
1
Enter [ ] mode.
● Follow step 1 in “Specic Scenes”
(
=
96) and choose [ ].
2
Customize the settings as
desired (=
111 – =
133),
and then shoot.
● If adequate exposure cannot be obtained when you press the
shutter button halfway, the shutter speed and aperture value are
displayed in orange. In this case, try adjusting the ISO speed
(
=
113) or activating the ash (if subjects are dark,
=
130),
which may enable adequate exposure.
● Movies can be recorded in [
] mode as well, by pressing the
movie button. However, some FUNC. (
=
54) and MENU
(
=
56) settings may be automatically adjusted for movie
recording.
111
ç Contents
Image Brightness (Exposure)
Adjusting Image Brightness (Exposure
Compensation)
Still Images
Movies
The standard exposure set by the camera can be adjusted in 1/3-
stop increments, in a range of –2 to +2.
● Press the [
] button. As you
watch the screen, press the [ ][ ]
buttons to adjust brightness.
● When shooting movies, shoot
with the exposure compensation
bar displayed.
● When shooting still images, press
the [
] button to display the set
exposure compensation amount,
and then shoot.
● You can also shoot still images with the exposure compensation
bar displayed.
● While recording a movie, [
] is displayed, and the exposure is
locked.
112
ç Contents
Changing the Metering Method
Still Images
Movies
Adjust the metering method (how brightness is measured) to suit
shooting conditions as follows.
● Press the [
] button, choose [ ]
in the menu, and choose the
desired option (
=
54).
● The option you congured is now
displayed.
Evaluative
For typical shooting conditions, including
backlit shots. Automatically adjusts exposure
to match the shooting conditions.
Center
Weighted
Avg.
Determines the average brightness of light
across the entire image area, calculated by
treating brightness in the central area as
more important.
Spot
Metering restricted to within the [
] (Spot
AE Point frame), displayed in the center of
the screen.
113
ç Contents
Changing the ISO Speed
Still Images
Movies
When the ISO speed setting is [AUTO], it is set automatically to
suit the shooting mode and scene. The higher the value the ISO
speed is, the greater the light sensitivity is. The lower the value the
ISO speed is, the smaller the light sensitivity is.
● Press the [
] button, choose
[ ] in the menu, and choose the
desired option (
=
54).
● The option you congured is now
displayed.
● To view the automatically determined ISO speed when you have
set the ISO speed to [AUTO], press the shutter button halfway.
● Although choosing a lower ISO speed may reduce image
graininess, there may be a greater risk of subject and camera
shake in some shooting conditions.
● Choosing a higher ISO speed will increase shutter speed, which
may reduce subject and camera shake and increase the ash
range. However, shots may look grainy.
114
ç Contents
Correcting Image Brightness (i-Contrast)
Still Images
Movies
Before shooting, excessively bright or dark image areas (such as
faces or backgrounds) can be detected and automatically adjusted
to the optimal brightness. Insufcient overall image contrast can
also be automatically corrected before shooting to make subjects
stand out better.
● Press the [
] button,
choose [i-Contrast] on the
[ ] tab, and then choose [Auto]
(
=
56).
● Once the setting is complete, [
]
is displayed.
● Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
● You can also correct existing images (
=
171).
115
ç Contents
Image Colors
Adjusting White Balance
Still Images
Movies
By adjusting white balance (WB), you can make image colors look
more natural for the scene you are shooting.
● Press the [
] button, choose
[ ] in the menu, and choose the
desired option (
=
54).
● The option you congured is now
displayed.
Auto
Automatically sets the optimal white
balance for the shooting conditions
Day Light For shooting outdoors in fair weather
Cloudy For shooting in cloudy weather or at twilight
Tungsten
For shooting under ordinary incandescent
lighting
Fluorescent
For shooting under white uorescent
lighting
Fluorescent
H
For shooting under daylight uorescent
lighting
Custom
For manually setting a custom white
balance (
=
116)
116
ç Contents
Custom White Balance
Still Images
Movies
For image colors that look natural under the light in your shot,
adjust white balance to suit the light source where you are
shooting. Set the white balance under the same light source that
will illuminate your shot.
● Follow the steps in “Adjusting
White Balance” (
=
115) to
choose [ ].
● Aim the camera at a plain white
subject, so that the entire screen
is white. Press the [
]
button.
● The tint of the screen changes
once the white balance data has
been recorded.
● Colors may look unnatural if you change camera settings after
recording white balance data.
117
ç Contents
Changing Image Color Tones (My Colors)
Still Images
Movies
Change image color tones as desired, such as converting images
to sepia or black and white.
● Press the [
] button, choose
[ ] in the menu, and choose the
desired option (
=
54).
● The option you congured is now
displayed.
My Colors Off
–
Vivid
Emphasizes contrast and color
saturation, making images sharper.
Neutral
Tones down contrast and color
saturation for subdued images.
Sepia Creates sepia tone images.
B/W Creates black and white images.
Positive Film
Combines the effects of Vivid Blue,
Vivid Green, and Vivid Red to produce
intense yet natural-looking colors
resembling images on positive lm.
Lighter Skin Tone Lightens skin tones.
Darker Skin Tone Darkens skin tones.
Vivid Blue
Emphasizes blues in images. Makes
the sky, ocean, and other blue subjects
more vivid.
118
ç Contents
Vivid Green
Emphasizes greens in images. Makes
mountains, foliage, and other green
subjects more vivid.
Vivid Red
Emphasizes reds in images. Makes red
subjects more vivid.
Custom Color
Adjust contrast, sharpness, color
saturation, and other qualities as
desired (
=
119).
● White balance (
=
115) cannot be set in [ ] or [ ] modes.
● With [
] and [ ] modes, colors other than people’s skin tone
may change. These settings may not produce the expected
results with some skin tones.
119
ç Contents
Custom Color
Still Images
Movies
Choose the desired level of image contrast, sharpness, color
saturation, red, green, blue, and skin tones in a range of 1 – 5.
1
Access the setting screen.
● Follow the steps in “Changing
Image Color Tones (My Colors)”
(
=
117) to choose [ ], and then
press the [ ] button.
2
Congure the setting.
● Press the [ ][ ] buttons to
choose an item, and then specify
the value by pressing the [ ][ ]
buttons.
● For stronger/more intense effects
(or darker skin tones), adjust the
value to the right, and for weaker/
lighter effects (or lighter skin
tones), adjust the value to the left.
● Press the [
] button to
complete the setting.
120
ç Contents
Shooting Range and Focusing
Shooting Close-Ups (Macro)
Still Images
Movies
To restrict the focus to subjects at close range, set the camera
to [ ]. For details on the range of focus, see “Shooting Range”
(
=
333).
● Press the [
] button, press the
[ ][ ] buttons to choose [ ], and
then press the [ ] button.
● Once the setting is complete, [
]
is displayed.
● If the ash res, vignetting may occur.
● Be careful to avoid damaging the lens.
● When the zoom position is within the range of the yellow bar
below the zoom bar, [
] turns gray and the camera cannot focus.
● To prevent camera shake, try mounting the camera on a tripod
and shooting with the camera set to [
] (
=
77).
121
ç Contents
Shooting Distant Subjects (Innity)
Still Images
Movies
To restrict the focus to distant subjects, set the camera to [ ]. For
details on the range of focus, see “Shooting Range” (
=
333).
● Press the [
] button, press the
[ ][ ] buttons to choose [ ], and
then press the [ ] button.
● Once the setting is complete, [
]
is displayed.
122
ç Contents
Digital Tele-Converter
Still Images
Movies
The focal length of the lens can be increased by approximately
1.6x or 2.0x. This can reduce camera shake because the shutter
speed is faster than it would be if you zoomed (including using
digital zoom) in to the same zoom factor.
● Press the [
] button,
choose [Digital Zoom] on the [ ]
tab, and then choose the desired
option (
=
56).
● The view is enlarged and the
zoom factor is displayed on the
screen.
● The digital tele-converter cannot be used with digital zoom
(
=
74) or AF-point zoom (
=
87).
● The shutter speed may be equivalent when you move the zoom
lever all the way toward [
] for maximum telephoto, and when
you zoom in to enlarge the subject to the same size following step
2 in “Zooming In Closer on Subjects (Digital Zoom)” (
=
74).
123
ç Contents
Changing the AF Frame Mode
Still Images
Movies
Change the AF (auto focus) frame mode to suit the shooting
conditions as follows.
● Press the [
] button,
choose [AF Frame] on the [ ]
tab, and then choose the desired
option (
=
56).
Center
Still Images
Movies
One AF frame is displayed in the center. Effective for reliable
focusing.
● A yellow AF frame is displayed with [ ] if the camera cannot
focus when you press the shutter button halfway.
124
ç Contents
● To reduce the AF frame size, press the [ ] button and set
[AF Frame Size] on the [
] tab to [Small] (
=
56).
● The AF frame size is set to [Normal] when you use the digital
zoom (
=
74) or digital tele-converter (
=
122).
● To compose shots so that subjects are positioned at the edge or
in a corner, rst aim the camera to capture the subject in an AF
frame, and then hold the shutter button halfway down. As you
continue to hold the shutter button halfway, recompose the shot
as desired, and then press the shutter button all the way down
(Focus Lock).
● The AF frame position is enlarged when you press the shutter
button halfway with [AF-Point Zoom] (
=
87) set to [On].
Face AiAF
Still Images
Movies
● Detects people’s faces, and then sets the focus, exposure
(evaluative metering only), and white balance ([ ] only).
● After you aim the camera at the subject, a white frame
is displayed around the person’s face determined by the
camera to be the main subject, and up to two gray frames are
displayed around other detected faces.
● When the camera detects movement, frames will follow moving
subjects, within a certain range.
● After you press the shutter button halfway, up to nine green
frames are displayed around faces in focus.
125
ç Contents
● If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
● If faces are not detected when Servo AF (
=
127) is set to [On],
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
● Examples of faces that cannot be detected:
- Subjects that are distant or extremely close.
- Subjects that are dark or light.
- Faces in prole, at an angle, or partly hidden.
● The camera may misinterpret non-human subjects as faces.
● No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Choosing Subjects to Focus On (Tracking AF)
Still Images
Movies
Shoot after choosing a subject to focus on as follows.
1
Choose [Tracking AF].
● Follow the steps in “Changing the
AF Frame Mode” (
=
123) to
choose [Tracking AF].
● [
] is displayed in the center of
the screen.
126
ç Contents
2
Choose a subject to focus
on.
● Aim the camera so that [ ] is
on the desired subject, and then
press the [ ] button.
● When the subject is detected,
the camera beeps and [
] is
displayed. Even if the subject
moves, the camera will continue
to track the subject within a
certain range.
● If no subject is detected, [
] is
displayed.
● To cancel tracking, press the [
]
button again.
3
Shoot.
● Press the shutter button halfway.
[ ] changes to a blue [ ], which
follows the subject as the camera
continues to adjust the focus and
exposure (Servo AF) (
=
127).
● Press the shutter button all the
way down to shoot.
● Even after your shot, [
] is
still displayed and the camera
continues to track the subject.
127
ç Contents
● [Servo AF] (
=
127) is set to [On] and cannot be changed.
● Tracking may not be possible when subjects are too small or
move too rapidly, or when subject color or brightness matches
that of the background too closely.
● [AF-Point Zoom] on the [
] tab (
=
56) is not available.
● [
] and [ ] are not available.
● The camera can detect subjects even if you press the shutter
button halfway without pressing the [
] button. After your shot,
[
] is displayed in the center of the screen.
Shooting with Servo AF
Still Images
Movies
This mode helps avoid missing shots of subjects in motion,
because the camera continues to focus on the subject and adjust
the exposure as long as you press the shutter button halfway.
1
Congure the setting.
● Press the [ ] button,
choose [Servo AF] on the
[ ] tab, and then choose [On]
(
=
56).
128
ç Contents
2
Focus.
● The focus and exposure are
maintained where the blue AF
frame is displayed while you
are pressing the shutter button
halfway.
● Focusing may not be possible in some shooting conditions.
● In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specied AF frame mode.
● If adequate exposure cannot be obtained, the shutter speed
and aperture value are displayed in orange. Release the shutter
button, and then press it halfway again.
● [AF-Point Zoom] on the [
] tab (
=
56) is not available.
● Not available when using the self-timer (
=
76).
129
ç Contents
Changing the Focus Setting
Still Images
Movies
You can change default camera operation of constantly focusing
on subjects it is aimed at, even when the shutter button is not
pressed. Instead, you can limit camera focusing to the moment
you press the shutter button halfway.
● Press the [
] button,
choose [Continuous AF] on the
[ ] tab, and then choose [Off]
(
=
56).
On
Helps avoid missing sudden photo opportunities,
because the camera constantly focuses on subjects
until you press the shutter button halfway.
Off
Conserves battery power, because the camera
does not focus constantly.
130
ç Contents
Flash
Changing the Flash Mode
Still Images
Movies
You can change the ash mode to match the shooting scene. For
details on the ash range, see “Camera” (
=
329).
1
Lift the ash.
2
Congure the setting.
● Press the [ ] button, press the
[ ][ ] buttons to choose a ash
mode, and then press the [ ]
button.
● The option you congured is now
displayed.
● The setting screen cannot be accessed by pressing the [ ]
button when the ash is lowered. Lift the ash with your nger in
advance.
Auto
Fires automatically in low-light conditions.
131
ç Contents
On
Fires for each shot.
Slow Synchro
Fires to illuminate the main subject (such as people) while
shooting at a slower shutter speed to illuminate backgrounds out
of ash range.
● In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (
=
133).
● In [
] mode, even after the ash res, ensure that the main
subject does not move until the shutter sound is nished playing.
Off
For shooting without the ash.
● A blinking [ ] icon may be displayed when you press the shutter
button halfway in camera-shake inducing, low-light conditions. In
this case, mount the camera on a tripod or take other measures
to keep it still.
132
ç Contents
Other Settings
Changing the Compression Ratio (Image
Quality)
Still Images
Movies
Choose from two compression ratios, as follows. Choose from [ ]
(Super Fine) and [ ] (Fine). For guidelines on how many shots at
each compression ratio can t on a memory card, see “Number of
Shots per Memory Card” (
=
334).
● Press the [
] button, choose
[ ] in the menu, and choose the
desired option (
=
54).
133
ç Contents
Changing the IS Mode Settings
Still Images
Movies
1
Access the setting screen.
● Press the [ ] button,
choose [IS Settings] on the [ ]
tab, and then press the [ ] button
(
=
56).
2
Congure the setting.
● Choose [IS Mode], and then
choose the desired option
(
=
56).
Continuous
Optimal image stabilization for the shooting
conditions is automatically applied (Intelligent IS)
(
=
71).
Shoot Only*
Image stabilization is active only at the moment
of shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
● If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
134
ç Contents
Shooting Movies with Subjects at the Same
Size Shown before Shooting
Still Images
Movies
Normally, once movie recording begins, the image display area
changes and subjects are enlarged to allow for correction of
signicant camera shake. To shoot subjects at the same size
shown before shooting, you can choose not to reduce signicant
camera shake.
● Follow the steps in “Changing
the IS Mode Settings” (
=
133)
to access the [IS Settings] screen.
● Choose [Dynamic IS], and then
choose [2] (
=
56).
● When you set the movie quality to [ ] (
=
85), it is locked at
[1].
● You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
135
ç Contents
Playback Mode
Have fun reviewing your shots, and browse or edit them in
many ways
● To prepare the camera for these operations, press the
[
] button to enter Playback mode.
● It may not be possible to play back or edit images that
were renamed or already edited on a computer, or
images from other cameras.
5
136
ç Contents
Viewing
Still Images
Movies
After shooting images or movies, you can view them on the screen
as follows.
1
Enter Playback mode.
● Press the [ ] button.
● Your last shot is displayed.
2
Choose an image.
● To view the previous image, press
the [ ] button. To view the next
image, press the [ ] button.
● To access this screen (Scroll
Display mode), press and hold
the [
][ ] buttons for at least one
second. In this mode, press the
[ ][ ] buttons to browse through
images.
137
ç Contents
● To return to single-image display,
press the [ ] button.
● To browse images grouped by
shooting date, press the [
][ ]
buttons in Scroll Display mode.
● Movies are identied by a [
]
icon. To play movies, go to step 3.
3
Play movies.
● To start playback, press the [ ]
button, press the [ ][ ] buttons
to choose [ ], and then press
the [ ] button again.
4
Adjust the volume.
● Press the [ ][ ] buttons to
adjust the volume.
● To adjust the volume when the
volume indicator (1) is no longer
displayed, press the [
][ ]
buttons.
(
1
)
138
ç Contents
5
Pause playback.
● To pause or resume playback,
press the [ ] button.
● After the movie is nished,
[
] is displayed.
● To switch to Shooting mode from Playback mode, press the
shutter button halfway.
● To deactivate Scroll Display, choose MENU (
=
56) > [ ] tab
> [Scroll Display] > [Off].
● To have the most recent shot displayed when you enter Playback
mode, choose MENU (
=
56) > [ ] tab > [Resume] > [Last
shot].
● To change the transition shown between images, access MENU
(
=
56) and choose your desired effect on the [ ] tab >
[Transition].
139
ç Contents
Switching Display Modes
Still Images
Movies
Press the [ ] button to view other information on the screen, or to
hide the information. For details on the information displayed, see
“Playback (Detailed Information Display)” (
=
307).
No Information Display
Simple Information Display
Detailed Information Display
140
ç Contents
Overexposure Warning (for Image Highlights)
Still Images
Movies
Washed-out highlights in the image ash on the screen in detailed
information display (
=
139).
Histogram
Still Images
Movies
● The graph in detailed information
display (
=
139) is a histogram
showing the distribution of
brightness in the image. The
horizontal axis represents the
degree of brightness, and the
vertical axis, how much of
the image is at each level of
brightness. Viewing the histogram
is a way to check exposure.
GPS Information Display
Still Images
Movies
● Using a smartphone connected
to the camera via Wi-Fi, you
can geotag images on the
camera, adding information
such as latitude, longitude, and
elevation (
=
236). You can
review this information in the GPS
information display.
141
ç Contents
● Latitude, longitude, elevation, and
UTC (shooting date and time) are
listed from top to bottom.
● GPS information display is not available for images that lack this
information.
● [---] is shown instead of numerical values for items not available
on your smartphone or items not recorded correctly.
● UTC: Coordinated Universal Time, essentially the same as
Greenwich Mean Time.
142
ç Contents
Browsing and Filtering Images
Navigating through Images in an Index
Still Images
Movies
By displaying multiple images in an index, you can quickly nd the
images you are looking for.
1
Display images in an index.
● Move the zoom lever toward
[ ] to display images in an
index. Moving the lever again will
increase the number of images
shown.
● To display fewer images, move
the zoom lever toward [
]. Fewer
images are shown each time you
move the lever.
2
Choose an image.
● Press the [ ][ ][ ][ ] buttons to
choose an image.
● An orange frame is displayed
around the selected image.
● Press the [
] button to view the
selected image in single-image
display.
143
ç Contents
Finding Images Matching Specied
Conditions
Still Images
Movies
Find desired images quickly on a memory card full of images by
ltering image display according to your specied conditions. You
can also protect (
=
151) or delete (
=
157) these images all at
once.
People
Displays images with detected faces.
Shot Date
Displays the images shot on a specic date.
Favorites
Displays images tagged as favorites (
=
164).
Still image/
Movie
Displays only still images or movies.
1
Choose a search condition.
● Press the [ ] button, choose
[ ] in the menu, and choose a
condition (
=
54).
● When you have selected [
]
or [ ], choose the condition by
pressing the [ ][ ][ ][ ] buttons
on the screen displayed, and then
press the [ ] button.
144
ç Contents
2
View the ltered images.
● Images matching your conditions
are displayed in yellow frames. To
view only these images, press the
[ ][ ] buttons.
● To cancel ltered display, choose
[
] in step 1.
● When the camera has found no corresponding images for some
conditions, those conditions will not be available.
● To hide or view other information, press the [ ] button in step 2.
● Options for viewing the images found (in step 2) include
“Navigating through Images in an Index” (
=
142), “Magnifying
Images” (
=
145), and “Viewing Slideshows” (
=
147). You can
also apply image operations to all images found, by choosing
[Protect All Images] in “Protecting Images” (
=
151) or [Select All
Images] in “Erasing Multiple Images at Once” (
=
157), “Adding
Images to the Print List (DPOF)” (
=
283), or “Adding Images to
a Photobook” (
=
288).
● If you edit images and save them as new images (
=
166 –
=
175), a message is displayed, and the images that were
found are no longer shown.
145
ç Contents
Image Viewing Options
Magnifying Images
Still Images
Movies
1
Magnify an image.
● Moving the zoom lever toward
[ ] will zoom in and magnify the
image, and [ ] is displayed.
You can magnify images up to
about 10x by continuing to hold
the zoom lever.
● The approximate position of the
displayed area (1) is shown for
reference.
● To zoom out, move the zoom
lever toward [
]. You can
return to single-image display by
continuing to hold it.
2
Move the display position
and switch images as
needed.
● To move the display position,
press the [ ][ ][ ][ ] buttons.
(
1
)
146
ç Contents
● While [ ] is displayed, you
can switch to [ ] by pressing
the [ ] button. To switch to other
images while zoomed, press
the [ ][ ] buttons. Press the
[ ] button again to restore the
original setting.
● You can return to single-image display from magnied display by
pressing the [
] button.
147
ç Contents
Viewing Slideshows
Still Images
Movies
Automatically play back images from a memory card as follows.
Each image is displayed for about three seconds.
● Press the [
] button, choose
[ ] in the menu, and choose the
desired option (
=
54).
● The slideshow will start after
[Loading image] is displayed for a
few seconds.
● Press the [
] button to stop
the slideshow.
● The camera’s power-saving functions (
=
49) are deactivated
during slideshows.
● To pause or resume slideshows, press the [ ] button.
● You can switch to other images during playback by pressing the
[
][ ] buttons. For fast-forward or fast-rewind, hold the [ ][ ]
buttons down.
● In ltered display (
=
143), only images matching search
conditions are played.
148
ç Contents
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the
transitions between images and the display duration of each
image.
1
Access the setting screen.
● Press the [ ] button, and
then choose [Slideshow] on the
[ ] tab (
=
56).
2
Congure the settings.
● Choose a menu item to congure,
and then choose the desired
option (
=
56).
● To start the slideshow with your
settings, choose [Start] and press
the [
] button.
● To return to the menu screen,
press the [
] button.
● [Play Time] cannot be modied when [Bubble] is chosen in
[Effect].
149
ç Contents
Auto Playback of Related Images (Smart
Shufe)
Still Images
Movies
Based on the current image, the camera offers four images that
you may wish to view. After you choose to view one of those
images, the camera offers four more images. This is an enjoyable
way to play back images in an unexpected order. Try this feature
after you have taken many shots, in many kinds of scenes.
1
Choose Smart Shufe.
● Press the [ ] button, and
then choose [ ] in the menu
(
=
54).
● Four candidate images are
displayed.
2
Choose an image.
● Press the [ ][ ][ ][ ] buttons
to choose the image you want to
view next.
● Your chosen image is displayed
in the center, surrounded by the
next four candidate images.
● For full-screen display of
the center image, press the
[
] button. To restore the original
display, press the [ ] button
again.
151
ç Contents
Protecting Images
Still Images
Movies
Protect important images to prevent accidental erasure (
=
157).
● Press the [
] button, and
then choose [ ] in the
menu (
=
54). [Protected] is
displayed.
● To untag the image, repeat this
process and choose [
] again,
and then press the [ ] button.
● Protected images on a memory card will be erased if you format
the card (
=
254,
=
256).
● Protected images cannot be erased using the camera’s erasure
function. To erase them this way, rst cancel protection.
152
ç Contents
Using the Menu
1
Access the setting screen.
● Press the [ ] button and
choose [Protect] on the [ ] tab
(
=
56).
2
Choose a selection method.
● Choose a menu item and an
option as desired (
=
56).
● To return to the menu screen,
press the [
] button.
Choosing Images Individually
1
Choose [Select].
● Following step 2 in “Using the
Menu” (
=
152), choose [Select]
and press the [ ] button.
153
ç Contents
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button. [ ] is displayed.
● To untag the image, press the
[
] button again. [ ] is no longer
displayed.
● Repeat this process to specify
other images.
3
Protect the images.
● Press the [ ] button.
A conrmation message is
displayed.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
● Images will not be protected if you switch to Shooting mode or
turn the camera off before nishing the setup process in step 3.
154
ç Contents
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Using the
Menu” (
=
152), choose [Select
Range] and press the [ ] button.
2
Choose a starting image.
● Press the [ ] button.
● Press the [
][ ] buttons to
choose an image, and then press
the [ ] button.
3
Choose an ending image.
● Press the [ ] button to choose
[Last image], and then press the
[ ] button.
155
ç Contents
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button.
● Images before the rst image
cannot be selected as the last
image.
4
Protect the images.
● Press the [ ] button to choose
[Protect], and then press the [ ]
button.
● To cancel protection for groups of images, choose [Unlock] in
step 4.
156
ç Contents
Protecting All Images at Once
1
Choose [Protect All Images].
● Following step 2 in “Using the
Menu” (
=
152), choose [Protect
All Images] and press the [ ]
button.
2
Protect the images.
● Press the [ ][ ] buttons to
choose [OK], and then press the
[ ] button.
Clearing All Protection at Once
You can clear protection from all images at once.
To clear protection, choose [Unprotect All Images] in step 1 of
“Protecting All Images at Once”, and then complete step 2.
157
ç Contents
Erasing Images
Still Images
Movies
You can choose and erase unneeded images one by one. Be
careful when erasing images, because they cannot be recovered.
However, protected images (
=
151) cannot be erased.
1
Choose an image to erase.
● Press the [ ][ ] buttons to
choose an image.
2
Erase the image.
● Press the [ ] button.
● After [Erase?] is displayed, press
the [
][ ] buttons to choose
[Erase], and then press the [ ]
button.
● The current image is now erased.
● To cancel erasure, press the
[
][ ] buttons to choose [Cancel],
and then press the [ ] button.
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when
erasing images, because they cannot be recovered. However,
protected images (
=
151) cannot be erased.
158
ç Contents
Choosing a Selection Method
1
Access the setting screen.
● Press the [ ] button, and
then choose [Erase] on the [ ]
tab (
=
56).
2
Choose a selection method.
● Press the [ ][ ] buttons to
choose a selection method, and
then press the [ ] button.
● To return to the menu screen,
press the [
] button.
Choosing Images Individually
1
Choose [Select].
● Following step 2 in “Choosing
a Selection Method” (
=
158),
choose [Select] and press the [ ]
button.
159
ç Contents
2
Choose an image.
● Once you choose an image
following step 2 in “Choosing
Images Individually” (
=
152),
[ ] is displayed.
● To untag the image, press the
[
] button again. [ ] is no longer
displayed.
● Repeat this process to specify
other images.
3
Erase the image.
● Press the [ ] button.
A conrmation message is
displayed.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Choosing
a Selection Method” (
=
158),
choose [Select Range] and press
the [ ] button.
160
ç Contents
2
Choose images.
● Follow steps 2 – 3 in “Selecting
a Range” (
=
154) to specify
images.
3
Erase the image.
● Press the [ ] button to choose
[Erase], and then press the [ ]
button.
Specifying All Images at Once
1
Choose [Select All Images].
● Following step 2 in “Choosing
a Selection Method” (
=
158),
choose [Select All Images] and
press the [ ] button.
2
Erase the image.
● Press the [ ][ ] buttons to
choose [OK], and then press the
[ ] button.
161
ç Contents
Rotating Images
Still Images
Movies
Change the orientation of images and save them as follows.
1
Choose [ ].
● Press the [ ] button, and
then choose [ ] in the menu
(
=
54).
2
Rotate the image.
● Press the [ ] or [ ] button,
depending on the desired
direction. Each time you press the
button, the image is rotated 90°.
Press the [ ] button to complete
the setting.
162
ç Contents
Using the Menu
1
Choose [Rotate].
● Press the [ ] button and
choose [Rotate] on the [ ] tab
(
=
56).
2
Rotate the image.
● Press the [ ][ ] buttons to
choose an image.
● The image is rotated 90° each
time you press the [
] button.
● To return to the menu screen,
press the [
] button.
● Rotation is not possible when [Auto Rotate] is set to [Off]
(
=
163).
163
ç Contents
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which
rotates images based on the current camera orientation.
● Press the [
] button,
choose [Auto Rotate] on the
[ ] tab, and then choose [Off]
(
=
56).
● Images cannot be rotated (
=
161) when you set [Auto Rotate]
to [Off]. Additionally, images already rotated will be displayed in
the original orientation.
● In Smart Shufe (
=
149) mode, even if [Auto Rotate] is set
to [Off], images shot vertically will be displayed vertically, and
rotated images will be displayed in the rotated orientation.
164
ç Contents
Tagging Images as Favorites
Still Images
Movies
You can organize images by tagging them as favorites. By
choosing a category in ltered playback, you can restrict the
following operations to all of those images.
● “Viewing” (
=
136), “Viewing Slideshows” (
=
147),
“Protecting Images” (
=
151), “Erasing Images” (
=
157),
“Adding Images to the Print List (DPOF)” (
=
283), “Adding
Images to a Photobook” (
=
288)
● Press the [
] button, and
then choose [ ] in the menu
(
=
54).
● [Tagged as Favorite] is displayed.
● To untag the image, repeat this
process and choose [
] again,
and then press the [ ] button.
Using the Menu
1
Choose [Favorites].
● Press the [ ] button and
choose [Favorites] on the [ ]
tab (
=
56).
165
ç Contents
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button. [ ] is displayed.
● To untag the image, press the
[
] button again. [ ] is no longer
displayed.
● Repeat this process to choose
additional images.
3
Congure the setting.
● Press the [ ] button.
A conrmation message is
displayed.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
● Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before nishing the setup process in
step 3.
166
ç Contents
Editing Still Images
● Image editing (
=
166 –
=
174) is only available when the
memory card has sufcient free space.
Resizing Images
Still Images
Movies
Save a copy of images at a lower number of resolution.
1
Choose [Resize].
● Press the [ ] button and
choose [Resize] on the [ ] tab
(
=
56).
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button.
3
Choose an image size.
● Press the [ ][ ] buttons to
choose the size, and then press
the [ ] button.
● [Save new image?] is displayed.
167
ç Contents
4
Save the new image.
● Press the [ ][ ] buttons to
choose [OK], and then press the
[ ] button.
● The image is now saved as a
new le.
5
Review the new image.
● Press the [ ] button.
[Display new image?] is
displayed.
● Press the [
][ ] buttons to
choose [Yes], and then press the
[ ] button.
● The saved image is now
displayed.
● Editing is not possible for images shot at a resolution of [ ]
(
=
84).
● Images cannot be resized to a higher resolution.
168
ç Contents
Cropping
Still Images
Movies
You can specify a portion of an image to save as a separate image
le.
1
Choose [Cropping].
● Press the [ ] button, and
then choose [Cropping] on the
[ ] tab (
=
56).
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button.
3
Adjust the cropping area.
● A frame is displayed around
the portion of the image to be
cropped (1).
● The original image is shown in the
upper left, and a preview of the
image as cropped (2) is shown in
the lower right. You can also see
the resolution after cropping (3).
● To resize the frame, move the
zoom lever.
● To move the frame, press the
[
][ ][ ][ ] buttons.
(
1
) (
2
) (
3
)
169
ç Contents
● To change the frame orientation,
press the [ ] button.
● Press the [
] button.
4
Save as a new image and
review.
● Follow steps 4 – 5 in “Resizing
Images” (
=
166).
● Editing is not possible for images shot at a resolution of [ ]
(
=
84) or resized to [ ] (
=
166).
● Images supported for cropping will have the same aspect ratio
after cropping.
● Cropped images will have a lower resolution than uncropped
images.
170
ç Contents
Changing Image Color Tones (My Colors)
Still Images
Movies
You can adjust image colors and then save the edited image as
a separate le. For details on each option, see “Changing Image
Color Tones (My Colors)” (
=
117).
1
Choose [My Colors].
● Press the [ ] button, and
then choose [My Colors] on the
[ ] tab (
=
56).
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button.
3
Choose an option.
● Press the [ ][ ] buttons to
choose an option, and then press
the [ ] button.
4
Save as a new image and
review.
● Follow steps 4 – 5 in “Resizing
Images” (
=
166).
171
ç Contents
● Image quality of pictures you repeatedly edit this way will be
a little lower each time, and you may not be able to obtain the
desired color.
● The color of images edited using this function may vary slightly
from the color of images shot using My Colors (
=
117).
Correcting Image Brightness (i-Contrast)
Still Images
Movies
Excessively dark image areas (such as faces or backgrounds) can
be detected and automatically adjusted to the optimal brightness.
Insufcient overall image contrast is also automatically corrected,
to make subjects stand out better. Choose from four correction
levels, and then save the image as a separate le.
1
Choose [i-Contrast].
● Press the [ ] button, and
then choose [i-Contrast] on the
[ ] tab (
=
56).
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button.
172
ç Contents
3
Choose an option.
● Press the [ ][ ] buttons to
choose an option, and then press
the [ ] button.
4
Save as a new image and
review.
● Follow steps 4 – 5 in “Resizing
Images” (
=
166).
● For some images, correction may be inaccurate or may cause
images to appear grainy.
● Images may look grainy after repeated editing using this function.
● If [Auto] does not produce the expected results, try correcting
images using [Low], [Medium], or [High].
173
ç Contents
Correcting Red-Eye
Still Images
Movies
Automatically corrects images affected by red-eye. You can save
the corrected image as a separate le.
1
Choose [Red-Eye Correction].
● Press the [ ] button, and
then choose [Red-Eye Correction]
on the [ ] tab (
=
56).
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image.
3
Correct the image.
● Press the [ ] button.
● Red-eye detected by the camera
is now corrected, and frames are
displayed around corrected image
areas.
● Enlarge or reduce images as
needed. Follow the steps in
“Magnifying Images” (
=
145).
174
ç Contents
4
Save as a new image and
review.
● Press the [ ][ ][ ][ ] buttons to
choose [New File], and then press
the [ ] button.
● The image is now saved as a
new le.
● Follow step 5 in “Resizing
Images” (
=
166).
● Some images may not be corrected accurately.
● To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be
erased.
● Protected images cannot be overwritten.
175
ç Contents
Editing Movies
Still Images
Movies
You can remove unneeded portions from the beginning and end
of movies.
1
Choose [ ].
● Following steps 1 – 5 in “Viewing”
(
=
136), choose [ ] and press
the [ ] button.
● The movie editing panel and
editing bar are now displayed.
2
Specify portions to cut.
● (1) is the movie editing panel, and
(2) is the editing bar.
● Press the [
][ ] buttons to
choose [ ] or [ ].
● To view the portions you can cut
(identied by [
] on the screen),
press the [ ][ ] buttons to move
[ ]. Cut the beginning of the
movie (from [ ]) by choosing
[ ], and cut the end of the movie
by choosing [ ].
(
1
)
(
2
)
176
ç Contents
● If you move [ ] to a position
other than a [ ] mark, in [ ]
the portion before the nearest
[ ] mark on the left will be cut,
while in [ ] the portion after the
nearest [ ] mark on the right will
be cut.
3
Review the edited movie.
● Press the [ ][ ] buttons to
choose [ ], and then press the
[ ] button. The edited movie is
now played.
● To edit the movie again, repeat
step 2.
● To cancel editing, press the
[
][ ] buttons to choose [ ].
Press the [ ] button, press the
[ ][ ] buttons to choose [OK],
and then press the [ ] button
again.
4
Save the edited movie.
● Press the [ ][ ] buttons to
choose [ ], and then press the
[ ] button.
● Press the [
][ ][ ][ ] buttons to
choose [New File], and then press
the [ ] button.
● The movie is now saved as a
new le.
177
ç Contents
● To overwrite the original movie with the cut one, choose
[Overwrite] in step 4. In this case, the original movie will be
erased.
● If the memory card lacks sufcient space, only [Overwrite] will be
available.
● Movies may not be saved if the battery pack runs out while saving
is in progress.
● When editing movies, you should use a fully charged battery
pack.
179
ç Contents
Available Wi-Fi Features
You can send and receive images and control the camera
remotely by connecting it to these devices and services via Wi-Fi.
● Smartphones and Tablets
Send images to smartphones and tablet computers that have
Wi-Fi functions. You can also shoot remotely and geotag your
shots from a smartphone or tablet.
For convenience in this manual, smartphones, tablets, and
other compatible devices are collectively referred to as
“smartphones”.
● Computer
Use software to save camera images to a computer connected
via Wi-Fi.
● Web Services
Add your account information to the camera for CANON
iMAGE GATEWAY online photography service or other Web
services to send camera images to the services. Unsent
images on the camera can also be sent to a computer or Web
service via CANON iMAGE GATEWAY.
● Printers
Send images wirelessly to a PictBridge-compatible printer
(supporting DPS over IP) to print them.
● Another Camera
Send images wirelessly between Wi-Fi compatible Canon
cameras.
180
ç Contents
Sending Images to a Smartphone
There are several ways to connect the camera to a smartphone
and send images.
● Connect via NFC (
=
181)
Simply touch an NFC-compatible Android smartphone (OS
version 4.0 or later) against the camera to connect the devices
● Use the Wi-Fi menu to connect (
=
189)
You can connect the camera to a smartphone as you would
connect it to a computer or other device. Multiple smartphones
can be added.
Before connecting to the camera, you must install the free
dedicated Camera Connect app on the smartphone. For details on
this application (supported smartphones and included functions),
refer to the Canon website.
● If you own a Wi-Fi compatible Canon camera and your camera
and smartphone are connected to Wi-Fi, it is recommended
that you change the app that you use on your smartphone from
“CameraWindow” to “Camera Connect”.
181
ç Contents
Sending Images to an NFC-Compatible
Smartphone
Using an NFC-compatible Android smartphone (OS version 4.0
or later) simplies the process of installing Camera Connect and
connecting the devices via NFC.
Operation once the devices are connected via NFC varies
depending on the camera mode when the devices are touched
together.
● If the camera is off or in Shooting mode when the devices are
touched together, you can choose and send images on the
image selection screen. Once the devices are connected, you
can also shoot remotely and geotag your shots (
=
236). It’s
easy to reconnect to recent devices, which are listed in the
Wi-Fi menu.
● When you touch the smartphone in Playback mode, the screen
with a list of images that you can choose to send is displayed.
Choose an image to send it.
Follow the instructions in the following section for NFC-initiated
connection to a camera that is off or in Shooting mode.
182
ç Contents
Connecting via NFC When Camera Is Off or in
Shooting Mode
1
Install Camera Connect.
● Activate NFC on the smartphone
and touch the device against the
camera’s N-Mark ( ) to start
Google Play on the smartphone
automatically. Once the Camera
Connect download page is
displayed, download and install
the app.
2
Establish the connection.
● Make sure the camera is off or in
Shooting mode.
● Touch the N-Mark (
) on
the smartphone with Camera
Connect installed against the
camera’s N-Mark.
● The camera starts up
automatically.
● After the [Device Nickname]
screen is displayed, press the
[
][ ] buttons to choose [OK],
and then press the [ ] button.
183
ç Contents
● Camera Connect is started on the
smartphone.
● The devices are connected
automatically.
3
Adjust the privacy setting.
● After this screen is displayed,
press the [ ][ ] buttons to
choose [Yes], and then press the
[ ] button.
● You can now use the smartphone
to browse, import, or geotag
images on the camera or shoot
remotely.
4
Send images.
● Press the [ ][ ][ ][ ] buttons
to choose [Select and send], and
then press the [ ] button.
● Press the [
][ ] buttons to
choose [Select], and then press
the [ ] button.
● Press the [
][ ][ ][ ] buttons
to choose an image to send,
press the [ ] button to mark it as
selected ([ ]), and then press the
[ ] button.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
184
ç Contents
● Press the [ ][ ][ ][ ] buttons
to choose [Send], and then press
the [ ] button.
● [Transfer completed] is displayed
after the image is sent, and
the image transfer screen is
displayed again.
● To end the connection, press
the [
] button, press the
[ ][ ] buttons on the conrmation
screen to choose [OK], and then
press the [ ] button. You can
also use the smartphone to end
the connection.
185
ç Contents
● When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone. This
may damage the devices.
- Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions. If connection is not
established, keep the devices together until the camera screen
is updated.
- If you try to connect while the camera is off, a message will be
displayed on your smartphone to ask you to turn the camera on.
Touch and try again after the camera is turned on.
- Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
● All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 3. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 3.
● Once you have registered a smartphone, you can change privacy
settings for it on the camera (
=
239).
186
ç Contents
● Connections require that a memory card be in the camera.
● You can change the nickname of the camera displayed on the
screen of step 2 (
=
182).
● Not all NFC-compatible smartphones have an N-Mark (
). For
details, refer to the smartphone user manual.
● You can also send multiple images at once and change the image
size before sending (
=
224).
● You can send the current image by choosing [Send this image] on
the screen in step 4.
● To disable NFC connections, choose MENU (
=
56) > [ ] tab
> [Wireless settings] > [Wi-Fi Settings] > [NFC] > [Off].
187
ç Contents
Connecting via NFC When Camera Is in
Playback Mode
● Press the [ ] button to turn the
camera on.
● Touch the N-Mark (
) on the
smartphone (
=
181) with
Camera Connect installed against
the camera’s N-Mark.
● Press the [
][ ][ ][ ] buttons
to choose an image to send, and
then press the [ ] button. [ ] is
displayed.
● To untag the image, press the
[
] button again. [ ] is no longer
displayed.
● Repeat this process to choose
additional images.
● After you nish choosing images,
press the [
] button.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
● Press the [
][ ][ ][ ] buttons
to choose [Send], and then press
the [ ] button.
● The images are sent.
188
ç Contents
● If a message is displayed on the camera and requests you to
enter the nickname during connection, follow step 2 in “Sending
Images to an NFC-Compatible Smartphone” (
=
181) to enter it.
● The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
● You can preset images to transfer at your desired size (
=
224).
189
ç Contents
Adding a Smartphone
These steps show how to use the camera as an access point, but
you can also use an existing access point (
=
194).
1
Install Camera Connect.
● For an iPhone and iPad, nd
Camera Connect in the App Store
and download and install the app.
● For Android smartphones, nd
Camera Connect in Google Play
and download and install the app.
2
Access the Wi-Fi menu.
● Press the [ ] button.
● If the [Device Nickname] screen is
displayed, choose [OK] (
=
182).
3
Choose [ ].
● Press the [ ][ ][ ][ ] buttons
to choose [ ], and then press the
[ ] button.
190
ç Contents
4
Choose [Add a Device].
● Press the [ ][ ] buttons to
choose [Add a Device], and then
press the [ ] button.
● The camera’s SSID and password
are displayed.
5
Connect the smartphone to
the network.
● In the smartphone’s Wi-Fi setting
menu, choose the SSID (network
name) displayed on the camera to
establish a connection.
● In the password eld, enter
the password displayed on the
camera.
6
Start Camera Connect.
● Start Camera Connect on the
smartphone.
191
ç Contents
7
Choose the camera to
connect.
● When the screen for choosing
the target camera is displayed
on your smartphone, choose the
camera to pair them.
8
Adjust the privacy setting.
● Press the [ ][ ] buttons to
choose [Yes], and then press the
[ ] button.
● You can now use the smartphone
to browse, import, or geotag
images on the camera or shoot
remotely.
9
Send images.
● Press the [ ][ ][ ][ ] buttons
to choose [Select and send], and
then press the [ ] button.
● Press the [
][ ] buttons to
choose [Select], and then press
the [ ] button.
● Press the [
][ ][ ][ ] buttons
to choose an image to send,
press the [ ] button to mark it as
selected ([ ]), and then press the
[ ] button.
192
ç Contents
● Press the [ ][ ] buttons to
choose [OK], and then press the
[ ] button.
● Press the [
][ ][ ][ ] buttons
to choose [Send], and then press
the [ ] button.
● [Transfer completed] is displayed
after the image is sent, and
the image transfer screen is
displayed again.
● To end the connection, press
the [
] button, press the
[ ][ ] buttons on the conrmation
screen to choose [OK], and then
press the [ ] button. You can
also use the smartphone to end
the connection.
● To add multiple smartphones,
repeat the above procedure
starting from step 1.
● All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 8. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 8.
● Once you have registered a smartphone, you can change privacy
settings for it on the camera (
=
239).
193
ç Contents
● Connections require that a memory card be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the Wi-Fi menu.
You can easily connect again by pressing the [
][ ] buttons to
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[
][ ] buttons, and then congure the setting.
● If you prefer not to display recent target devices, choose MENU
(
=
56) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● To be able to connect without entering the password in step 5
and to make it so that [Password] does not display on the SSID
display screen (step 4), choose MENU (
=
56) > [ ] tab >
[Wireless settings] > [Wi-Fi Settings] > [Password] > [Off].
● You can also send multiple images at once and change the image
size before sending (
=
224).
● You can send the current image by choosing [Send this image] on
the screen in step 9.
194
ç Contents
Using Another Access Point
When connecting the camera to a smartphone through the Wi-Fi
menu, you can also use an existing access point.
1
Prepare for the connection.
● Access the [Waiting to connect]
screen by following steps 1 – 4 in
“Adding a Smartphone” (
=
189).
2
Connect the smartphone to
the access point.
3
Choose [Switch Network].
● Press the [ ][ ] buttons to
choose [Switch Network], and
then press the [ ] button.
● A list of detected access points
will be displayed.
4
Connect to the access point.
● For WPS-compatible access
points, connect to the access
point and choose the smartphone
as described in steps 5 – 8 in
“Using WPS-Compatible Access
Points” (
=
202).
195
ç Contents
● For non-WPS access points,
follow steps 2 – 4 in “Connecting
to Listed Access Points” (
=
207)
to connect to the access point
and choose the smartphone.
5
Congure the privacy
settings and send images.
● Follow steps 8 – 9 in “Adding
a Smartphone” (
=
189) to
congure the privacy settings and
send images.
Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in “Adding a Smartphone” (
=
189).
● To use the camera as an access point, choose [Switch
Network] on the screen displayed when you establish a
connection, and then choose [Camera Access Point Mode].
● To switch access points, choose [Switch Network] on the
screen displayed when you establish a connection, and then
follow the procedure in “Using Another Access Point” (
=
194)
from step 4.
196
ç Contents
Saving Images to a Computer
Preparing to Register a Computer
For detailed system requirements, such as about computers
that can connect to the camera and Wi-Fi, and compatibility
information, including support in new operating systems, visit the
Canon website.
● Windows 7 Starter and Home Basic editions are not supported.
● Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Installing the Software
Windows 7 and Mac OS X 10.8 are used here for the sake of
illustration.
1
Download the software.
● With a computer connected to
the Internet, access the following
website.
http://www.canon.com/icpd/
197
ç Contents
● Choose the country/area where
you live, and then follow the on-
screen instructions to download
the software.
● The software will be downloaded
to your computer in a zipped
format.
2
Install the software.
● Double-click the downloaded
le and the screen on the left is
displayed. Click [Easy Installation]
and follow the on-screen
instructions to complete the
installation process.
● Installation may take some
time, depending on computer
performance and the Internet
connection.
● Click [Finish] or [Restart] on the
screen after installation.
● Internet access is required, and any ISP account charges and
access fees must be paid separately.
198
ç Contents
● Use the following procedure to uninstall (delete) the software.
- If using Windows, click the [Start] menu
►
[All Programs]
►
[Canon Utilities], and choose the software that you want to
uninstall.
- If using Mac OS, click the [Applications] folder
►
[Canon
Utilities], and then move the folder of the software that you want
to uninstall to the Trash. Empty the Trash.
Conguring the Computer for a Wi-Fi
Connection (Windows Only)
On a computer running Windows, congure the following settings
before connecting the camera to the computer wirelessly.
1
Conrm that the computer
is connected to an access
point.
● For instructions on checking your
network connection, refer to the
computer user manual.
2
Congure the setting.
● Click in the following order: [Start]
menu
►
[All Programs]
►
[Canon
Utilities]
►
[CameraWindow]
►
[Wi-Fi connection setup].
● In the application that opens,
follow the on-screen instructions
and congure the setting.
199
ç Contents
● The following Windows settings are congured when you run the
utility in step 2.
- Turn on media streaming
This will enable the camera to see (nd) the computer to access
via Wi-Fi.
- Turn on network discovery
This will enable the computer to see (nd) the camera.
- Turn on ICMP (Internet Control Message Protocol)
This allows you to check the network connection status.
- Enable Universal Plug & Play (UPnP)
This will enable network devices to detect each other
automatically.
● Some security software may prevent you from completing the
settings as described here. Check the settings of your security
software.
200
ç Contents
Saving Images to a Connected Computer
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Conrming Access Point Compatibility
Conrm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Camera” (
=
329).
Connection methods vary depending on whether the access point
supports Wi-Fi Protected Setup (WPS,
=
202) or not (
=
207).
For non-WPS access points, check the following information.
● Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called
the “access point name” or “network name”.
● Network authentication / data encryption (encryption method /
encryption mode)
The method for encrypting data during wireless transmission.
Check which security setting is used: WPA2-PSK (AES),
WPA2-PSK (TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP
(open system authentication), or no security.
● Password (encryption key / network key)
The key used when encrypting data during wireless
transmission. Also called the “encryption key” or “network key”.
● Key index (transmit key)
The key set when WEP is used for network authentication /
data encryption. Use “1” as the setting.
201
ç Contents
● If system administrator status is needed to adjust network
settings, contact the system administrator for details.
● These settings are very important for network security. Exercise
adequate caution when changing these settings.
● For information on WPS compatibility and for instructions on
checking settings, refer to the access point user manual.
● A router is a device that creates a network (LAN) structure for
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
● This guide refers to all Wi-Fi routers and base stations as “access
points”.
● If you use MAC address ltering on your Wi-Fi network, be sure
to add the camera’s MAC address to your access point. You
can check your camera’s MAC address by choosing MENU
(
=
56) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Check MAC Address].
202
ç Contents
Using WPS-Compatible Access Points
WPS makes it easy to complete settings when connecting devices
over Wi-Fi. You can use either Push Button Conguration Method
or PIN Method for settings on a WPS supported device.
1
Conrm that the computer
is connected to an access
point.
● For instructions on checking the
connection, refer to the device
and access point user manuals.
2
Access the Wi-Fi menu.
● Press the [ ] button.
● After the [Device Nickname]
screen is displayed, press the
[
][ ] buttons to choose [OK],
and then press the [ ] button.
3
Choose [ ].
● Press the [ ][ ][ ][ ] buttons to
choose [ ], and then press the
[ ] button.
203
ç Contents
4
Choose [Add a Device].
● Press the [ ][ ] buttons to
choose [Add a Device], and then
press the [ ] button.
5
Choose [WPS Connection].
● Press the [ ][ ] buttons to
choose [WPS Connection], and
then press the [ ] button.
6
Choose [PBC Method].
● Press the [ ][ ] buttons to
choose [PBC Method], and then
press the [ ] button.
204
ç Contents
7
Establish the connection.
● On the access point, hold down
the WPS connection button for a
few seconds.
● On the camera, press the [
]
button to go to the next step.
● The camera connects to the
access point and lists devices
connected to it on the [Select a
Device] screen.
8
Choose the target device.
● Press the [ ][ ] buttons to
choose the target device name,
and then press the [ ] button.
9
Install a driver (rst Windows
connection only).
● When this screen is displayed on
the camera, click the Start menu
on the computer, click [Control
Panel], and then click [Add a
device].
205
ç Contents
● Double-click the connected
camera icon.
● Driver installation will begin.
● After driver installation is
complete, and the camera
and computer connection is
enabled, the AutoPlay screen
will be displayed. Nothing will be
displayed on the camera screen.
10
Display CameraWindow.
● Windows: Access CameraWindow
by clicking [Downloads Images
From Canon Camera].
● Mac OS: CameraWindow is
automatically displayed when a
Wi-Fi connection is established
between the camera and
computer.
11
Import images.
● Click [Import Images from
Camera], and then click [Import
Untransferred Images].
● Images are now saved to the
Pictures folder on the computer,
in separate folders named by
date.
● Click [OK] in the screen that is
displayed after image import is
complete.
206
ç Contents
● To look at a image saved on your
computer, use a software (such
as one installed on your computer
by default or general software)
that supports images shot with a
camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the Wi-Fi menu.
You can easily connect again by pressing the [
][ ] buttons to
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[
][ ] buttons, and then congure the setting.
● If you prefer not to display recent target devices, choose MENU
(
=
56) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● You can change the nickname of the camera displayed on the
screen of step 2 (
=
202).
● When the camera is connected to a computer, the camera screen
is blank.
● Mac OS: If CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock.
● To disconnect from the camera, turn off the camera.
● If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
207
ç Contents
Connecting to Listed Access Points
1
View the listed access points.
● View the listed networks (access
points) as described in steps
1 – 4 of “Using WPS-Compatible
Access Points” (
=
202).
2
Choose an access point.
● Press the [ ][ ] buttons to
choose a network (access point),
and then press the [ ] button.
3
Enter the access point
password.
● Press the [ ] button to access
the keyboard, and then enter the
password (
=
58).
● Press the [
][ ] buttons to
choose [Next], and then press the
[ ] button.
4
Choose [Auto].
● Press the [ ][ ] buttons to
choose [Auto], and then press the
[ ] button.
208
ç Contents
● To save images to a connected
computer, follow the procedure
from step 8 in “Using WPS-
Compatible Access Points”
(
=
202).
● To determine the access point password, check on the access
point itself or refer to the user manual.
● If no access points are detected even after you choose [Refresh]
in step 2 to update the list, choose [Manual Settings] in step 2
to complete access point settings manually. Follow on-screen
instructions and enter an SSID, security settings, and a password.
● When you use an access point that you have already connected
to for connecting to another device, [*] is displayed for the
password in step 3. To use the same password, press the [
][ ]
buttons to choose [Next], and then press the [
] button.
Previous Access Points
You can reconnect to any previous access points automatically
by following step 4 in “Using WPS-Compatible Access Points”
(
=
202).
● To reconnect to the access point, conrm that the target device
is already connected to it, and then follow the procedure from
step 8 in “Using WPS-Compatible Access Points” (
=
202).
● To switch access points, choose [Switch Network] on the
screen displayed when you establish a connection, and then
either follow the procedure in “Using WPS-Compatible Access
Points” (
=
202) from step 5 or the procedure in “Connecting
to Listed Access Points” (
=
207) from step 2.
209
ç Contents
Sending Images to a Registered
Web Service
Registering Web Services
Use a smartphone or computer to add to the camera Web services
that you want to use.
● A smartphone or computer with a browser and Internet
connection is required to complete camera settings for CANON
iMAGE GATEWAY and other Web services.
● Check the CANON iMAGE GATEWAY website for details
on browser (Microsoft Internet Explorer, etc.) requirements,
including settings and version information.
● For information on countries and regions where CANON
iMAGE GATEWAY is available, visit the Canon website (http://
www.canon.com/cig/).
● You must have an account with Web services other than
CANON iMAGE GATEWAY if you desire to use them. For
further details, check the websites for each Web service you
want to register.
● Separate ISP connection and access point fees may be
applicable.
● You can also download the user manual from CANON iMAGE
GATEWAY.
210
ç Contents
Registering CANON iMAGE GATEWAY
To link the camera and CANON iMAGE GATEWAY, add CANON
iMAGE GATEWAY as a destination Web service on the camera.
By setting this, an e-mail notication for Camera Web Link
Settings will be sent, so you must use the e-mail address that you
use on your computer or smartphone.
1
Access the Wi-Fi menu.
● Press the [ ] button.
● After the [Device Nickname]
screen is displayed, press the
[
][ ] buttons to choose [OK],
and then press the [ ] button.
2
Choose [ ].
● Press the [ ][ ][ ][ ] buttons to
choose [ ], and then press the
[ ] button.
211
ç Contents
3
Consent to entering your
e-mail address.
● Read the displayed content, press
the [ ][ ] buttons to choose
[I Agree], and then press the [ ]
button.
4
Establish a connection with
an access point.
● Connect to the access point as
described in steps 5 – 7 in “Using
WPS-Compatible Access Points”
(
=
202) or in steps 2 – 4 in
“Connecting to Listed Access
Points” (
=
207).
5
Enter your e-mail address.
● Once the camera is connected
to CANON iMAGE GATEWAY
via the access point, a screen is
displayed for entering an e-mail
address.
● Enter your e-mail address, press
the [
][ ] buttons to choose
[Next], and then press the [ ]
button.
212
ç Contents
6
Enter a four-digit number.
● Enter any four-digit number, press
the [ ][ ] buttons to choose
[Next], and then press the [ ]
button.
● You will need this four-digit
number later when setting up
linkage with CANON iMAGE
GATEWAY in step 8.
7
Conrm the e-mail
notication was sent.
● When information is sent from
CANON iMAGE GATEWAY, an
e-mail notication is sent to the
e-mail address you entered in
step 5.
● The screen notifying you that the
e-mail notication was sent is
displayed. Press the [
] button.
● The [
] icon changes to [ ].
8
Access the URL in the
received e-mail notication
and set the camera web link.
● From a computer or smartphone,
access the page linked in the
notication message.
213
ç Contents
● Follow the directions on the
Camera Web Link Settings page
to congure the settings.
9
Set CANON iMAGE GATEWAY
on the camera.
● Press the [ ][ ][ ][ ] buttons to
choose [ ], and then press the
[ ] button.
● [
] (
=
230) and CANON
iMAGE GATEWAY are now added
as destinations.
● You can also add other Web
services. To add other Web
services, follow the procedure in
“Registering Other Web Services”
(
=
214) from step 2.
● Depending on your e-mail settings on your computer or
smartphone, e-mail from specic domains may be rejected, and
you may not be able to receive the e-mail notication. Please
check your settings ahead of time.
● You can change the nickname of the camera displayed on the
screen of step 1 (
=
210).
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the menu. Press
the [
][ ] buttons to access the device selection screen and then
congure the setting.
214
ç Contents
Registering Other Web Services
You can also add Web services besides CANON iMAGE
GATEWAY to the camera.
1
Log in to CANON iMAGE
GATEWAY and access the
Camera Web Link Settings
page.
● From a computer or smartphone,
access http://www.canon.com/
cig/ to visit CANON iMAGE
GATEWAY.
2
Congure the Web service
you want to use.
● Using your computer or
smartphone, display the Web
service settings screen.
● Follow the instructions displayed
on the screen to set up the Web
service.
3
Choose [ ].
● Press the [ ] button.
● Press the [
][ ][ ][ ] buttons to
choose [ ], and then press the
[ ] button.
● The Web service settings are now
updated.
215
ç Contents
● If any congured settings change, follow these steps again to
update the camera settings.
Uploading Images to Web Services
1
Access the Wi-Fi menu.
● Press the [ ] button.
2
Choose the destination.
● Press the [ ][ ][ ][ ] buttons
to choose the icon of the Web
service to connect to, and then
press the [ ] button.
● If multiple recipients or sharing
options are used with a Web
service, choose the desired item
on the [Select Recipient] screen
by pressing the [
][ ] buttons,
and then press the [ ] button.
216
ç Contents
3
Send images.
● Press the [ ][ ][ ][ ] buttons
to choose [Select and send], and
then press the [ ] button.
● Press the [
][ ] buttons to
choose [Select], and then press
the [ ] button.
● Press the [
][ ][ ][ ] buttons
to choose an image to send,
press the [ ] button to mark it as
selected ([ ]), and then press the
[ ] button.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
● Press the [
][ ][ ][ ] buttons
to choose [Send], and then press
the [ ] button.
● When uploading to YouTube,
read the terms of service, choose
[I Agree], and press the [
]
button.
● After the image is sent, [OK] is
displayed on the screen. Press
the [
] button to return to the
playback screen.
217
ç Contents
● Connections require that a memory card with saved images be in
the camera.
● You can also send multiple images at once, resize images, and
add comments before sending (
=
224).
● You can send the current image by choosing [Send this image] on
the screen in step 3.
● To look at images sent to CANON iMAGE GATEWAY from your
smartphone, it is recommended that you use the specialized
application Canon Online Photo Album. For iPhone and iPad,
nd Canon Online Photo Album in the App Store and download
and install the app. For Android smartphones, nd Canon Online
Photo Album in Google Play and download and install the app.
218
ç Contents
Printing Images Wirelessly from
a Connected Printer
Connect the camera to a printer via Wi-Fi to print as follows.
These steps show how to use the camera as an access point, but
you can also use an existing access point (
=
194).
1
Access the Wi-Fi menu.
● Press the [ ] button.
2
Choose [ ].
● Press the [ ][ ][ ][ ] buttons to
choose [ ], and then press the
[ ] button.
3
Choose [Add a Device].
● Press the [ ][ ] buttons to
choose [Add a Device], and then
press the [ ] button.
219
ç Contents
● The camera’s SSID and password
are displayed.
4
Connect the printer to the
network.
● In the printer’s Wi-Fi setting
menu, choose the SSID (network
name) displayed on the camera to
establish a connection.
● In the password eld, enter
the password displayed on the
camera.
5
Choose the printer.
● Press the [ ][ ] buttons to
choose the printer name, and
then press the [ ] button.
6
Choose an image to print.
● Press the [ ][ ] buttons to
choose an image.
● Press the [
] button, choose [ ],
and press the [ ] button again.
220
ç Contents
● Press the [ ][ ] buttons to
choose [Print], and then press the
[ ] button.
● For detailed printing instructions,
see “Printing Images” (
=
273).
● To end the connection, press
the [
] button, press the
[ ][ ] buttons on the conrmation
screen to choose [OK], and then
press the [ ] button.
● Connections require that a memory card with saved images be in
the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the Wi-Fi menu.
You can easily connect again by pressing the [
][ ] buttons to
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[
][ ] buttons, and then congure the setting.
● If you prefer not to display recent target devices, choose MENU
(
=
56) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● To be able to connect without entering the password in step 4
and to make it so that [Password] does not display on the SSID
display screen (step 3), choose MENU (
=
56) > [ ] tab >
[Wireless settings] > [Wi-Fi Settings] > [Password] > [Off].
● To use another access point, follow steps 3 – 4 in “Using Another
Access Point” (
=
194).
221
ç Contents
Sending Images to Another
Camera
Connect two cameras via Wi-Fi and send images between them as
follows.
● Only Canon-brand cameras equipped with a Wi-Fi function
can be connected to wirelessly. You cannot connect to a
Canon-brand camera that does not have a Wi-Fi function,
even if it supports FlashAir/Eye-Fi cards.
1
Access the Wi-Fi menu.
● Access the Wi-Fi menu as
described in step 2 in “Adding a
Smartphone” (
=
189).
2
Choose [ ].
● Press the [ ][ ][ ][ ] buttons to
choose [ ], and then press the
[ ] button.
3
Choose [Add a Device].
● Press the [ ][ ] buttons to
choose [Add a Device], and then
press the [ ] button.
● Follow steps 1 – 3 on the target
camera too.
222
ç Contents
● Camera connection information
will be added when [Start
connection on target camera]
is displayed on both camera
screens.
4
Send images.
● Press the [ ][ ][ ][ ] buttons
to choose [Select and send], and
then press the [ ] button.
● Press the [
][ ] buttons to
choose [Select], and then press
the [ ] button.
● Press the [
][ ][ ][ ] buttons
to choose an image to send,
press the [ ] button to mark it as
selected ([ ]), and then press the
[ ] button.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
● Press the [
][ ][ ][ ] buttons
to choose [Send], and then press
the [ ] button.
● [Transfer completed] is displayed
after the image is sent, and
the image transfer screen is
displayed again.
223
ç Contents
● To end the connection, press
the [ ] button, press the
[ ][ ] buttons on the conrmation
screen to choose [OK], and then
press the [ ] button.
● Connections require that a memory card be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the Wi-Fi menu.
You can easily connect again by pressing the [
][ ] buttons to
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[
][ ] buttons, and then congure the setting.
● If you prefer not to display recent target devices, choose MENU
(
=
56) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● You can also send multiple images at once and change the image
size before sending (
=
224).
● You can send the current image by choosing [Send this image] on
the screen in step 4.
224
ç Contents
Image Sending Options
You can choose multiple images to send at once and change the
image resolution (size) before sending. Some Web services also
enable you to annotate the images you send.
Sending Multiple Images
On the image transfer screen, you can select a range of images to
send, and send images tagged as favorites.
1
Choose [Select and send].
● On the image transfer screen,
press the [ ][ ] buttons to
choose [Select and send], and
then press the [ ] button.
2
Choose a selection method.
● Press the [ ][ ] buttons to
choose a selection method.
225
ç Contents
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Sending
Multiple Images” (
=
224),
choose [Select Range] and press
the [ ] button.
2
Choose images.
● Follow steps 2 – 3 in “Selecting
a Range” (
=
154) to specify
images.
● When sending movies as well,
press the [
][ ][ ][ ] buttons to
choose [Incl. Movies], and then
press [ ] to add [ ].
● Press the [
][ ][ ][ ] buttons to
choose [OK], and then press the
[ ] button.
3
Send the image.
● Press the [ ][ ] buttons to
choose [Send], and then press
the [ ] button.
226
ç Contents
Sending Images Tagged as Favorites
You can send images tagged as favorites (
=
164).
1
Choose [Favorite Images].
● Following step 2 in “Sending
Multiple Images” (
=
224),
choose [Favorite Images] and
press the [ ] button.
● The image selection screen that
displays only favorite images is
displayed. To make it so that an
image is not sent, after choosing
an image, press [
] to remove
[ ].
● Press the [
] button.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
2
Send the image.
● Press the [ ][ ] buttons to
choose [Send], and then press
the [ ] button.
● If you have no images tagged as favorite, you cannot choose
[Favorite Images] in step 1.
227
ç Contents
Notes on Sending Images
● Depending on the condition of the network you are using, it
may take a long time to send movies. Be sure to keep an eye
on the camera battery level.
● Web services may limit the number of images or length of
movies you can send.
● When sending movies to smartphones, note that the supported
image quality varies depending on the smartphone. For details,
refer to the smartphone user manual.
● On the screen, wireless signal strength is indicated by the
following icons.
[
] high, [ ] medium, [ ] low, [ ] weak
● Sending images to Web services will take less time when
resending images you have already sent that are still on the
CANON iMAGE GATEWAY server.
228
ç Contents
Choosing the Number of Recording Pixels
(Image Size)
On the image transfer screen, choose [ ] by pressing the [ ][ ]
buttons, and then press the [ ] button. On the screen displayed,
choose the resolution (image size) by pressing the [ ][ ]
buttons, and then press the [ ] button.
● To send images at original size, select [No] as the resizing
option.
● By choosing [
], you can resize images that are larger than
the selected size before sending.
● Movies cannot be resized.
● Image size can also be congured in MENU (
=
56) > [ ] tab
> [Wireless settings] > [Wi-Fi Settings] > [Resize for Sending].
229
ç Contents
Adding Comments
Using the camera, you can add comments to images that you
send to e-mail addresses, social networking services, etc. The
number of characters and symbols that can be entered may differ
depending on the Web service.
1
Access the screen for adding
comments.
● On the image transfer screen,
choose [ ] by pressing the
[ ][ ][ ][ ] buttons, and then
press the [ ] button.
2
Add a comment (=
58).
3
Send the image.
● When a comment is not entered, the comment set in CANON
iMAGE GATEWAY is automatically sent.
● You can also annotate multiple images before sending them. The
same comment is added to all images sent together.
230
ç Contents
Sending Images Automatically
(Image Sync)
Images on the memory card that have not been transferred
already can be sent to a computer or Web services via CANON
iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Preparing the Camera
Register [ ] as the destination. On the destination computer, install
and set up the Image Sync software “ImageTransfer Utility” (free).
1
Add [ ] as a destination.
● Add [ ] as a destination, as
described in “Registering CANON
iMAGE GATEWAY” (
=
210).
● When sending images to the Web
Service as well, log in to CANON
iMAGE GATEWAY (
=
210).
After choosing the camera model,
display the Web Service settings
screen. Under Image Sync
settings, choose the Web service
that you want to send the images
to. For details, see the CANON
iMAGE GATEWAY Help.
231
ç Contents
2
Choose the type of images
to send (only when sending
movies with images).
● Press the [ ] button,
choose [Wireless settings] on the
[ ] tab, and then choose [Wi-Fi
Settings] (
=
56).
● Press the [
][ ] buttons to
choose [Image Sync], and then
press the [ ][ ] buttons to
choose [Stills/Movies].
Preparing the Computer
Install and congure the software on the destination computer.
1
Install Image Transfer Utility.
● Install Image Transfer Utility on
a computer connected to the
Internet (
=
269).
● You can download the Image
Transfer Utility from the CANON
iMAGE GATEWAY Image Sync
setting screen (
=
210).
2
Register the camera.
● Windows: In the taskbar, right-
click [ ], and then click [Add new
camera].
● Mac OS: In the menu bar, click
[
], and then click [Add new
camera].
232
ç Contents
● A list of cameras linked to
CANON iMAGE GATEWAY is
displayed. Choose the camera
from which images are to be sent.
● Once the camera is registered
and the computer is ready to
receive images, the icon changes
to [
].
Sending Images
Images sent from the camera are automatically saved to the
computer.
If the computer that you intend to send images to is turned off,
the images will be stored temporarily on the CANON iMAGE
GATEWAY server. Stored images are regularly erased, so make
sure to turn on the computer and save the images.
1
Send images.
● Following steps 1 – 2 in
“Uploading Images to Web
Services” (
=
215), choose [ ].
● Images labeled with a [
] icon
have been transferred.
2
Save the images to the
computer.
● Images are automatically saved
to the computer when you turn
it on.
233
ç Contents
● Images are automatically sent to
Web services from the CANON
iMAGE GATEWAY server, even if
the computer is off.
● When sending images, you should use a fully charged battery
pack.
● Even if images were imported to the computer through a different
method, any images not sent to the computer via CANON iMAGE
GATEWAY will be sent to the computer.
● Sending is faster when the destination is a computer on the same
network as the camera, because images are sent via the access
point instead of CANON iMAGE GATEWAY. Note that images
stored on the computer are sent to CANON iMAGE GATEWAY, so
the computer must be connected to the Internet.
234
ç Contents
Viewing Images Sent via Image Sync on Your
Smartphone
When you install Canon Online Photo Album (Canon OPA) on your
smartphone, you can see and download images transferred with
Image Sync and temporarily saved on CANON iMAGE GATEWAY.
The following preparations are required in advance.
● You must nish the setup process for “Preparing the Computer”
(
=
231).
● For iPhone and iPad, nd Canon Online Photo Album in the
App Store and download and install the app. For Android
smartphones, nd Canon Online Photo Album in Google Play
and download and install the app.
● Log in to CANON iMAGE GATEWAY (
=
210). After choosing
the camera model, display the Web Service settings screen.
Under Image Sync settings, change the settings so that you
can view and download on your smartphone. For details, see
the CANON iMAGE GATEWAY Help.
● After a xed period of time, you will not be able to view images
deleted from CANON iMAGE GATEWAY.
● To view sent images, you must rst set Image Sync settings so
that you can view and download images on your smartphone.
● For information on Canon Online Photo Album operations, see
the Canon Online Photo Album Help.
235
ç Contents
Using a Smartphone to View Camera
Images and Control the Camera
You can do the following with the dedicated smartphone app
Camera Connect.
● Browse images on the camera and save them to the
smartphone
● Geotag images on the camera (
=
236)
● Shoot remotely (
=
236)
● Privacy settings must be congured in advance to allow image
viewing on the smartphone (
=
189,
=
239).
236
ç Contents
Geotagging Images on the Camera
GPS data recorded on a smartphone using the dedicated Camera
Connect application can be added to images on the camera.
Images are tagged with information including the latitude,
longitude, and elevation.
● Before shooting, make sure the date and time and your home
time zone are set correctly, as described in “Setting the Date and
Time” (
=
33). Also follow the steps in “World Clock” (
=
249)
to specify any shooting destinations in other time zones.
● Others may be able to locate or identify you by using location data
in your geotagged still images or movies. Be careful when sharing
these images with others, as when posting images online where
many others can view them.
Shooting Remotely
As you check a shooting screen on your smartphone, you can use
it to shoot remotely.
1
Secure the camera.
● Once remote shooting begins, the
camera lens will come out. Lens
motion from zooming may also
move the camera out of position.
Keep the camera still by mounting
it on a tripod or taking other
measures.
237
ç Contents
2
Connect the camera and
smartphone (=
189).
● In the privacy settings, choose
[Yes].
3
Choose remote shooting.
● In Camera Connect on the
smartphone, choose remote
shooting.
● The camera lens will come out.
Do not press near the lens, and
make sure no objects will obstruct
it.
● Once the camera is ready for
remote shooting, a live image
from the camera will be displayed
on the smartphone.
● At this time, a message is
displayed on the camera, and all
operations except pressing the
power button are disabled.
4
Shoot.
● Use the smartphone to shoot.
● The camera works in [ ] mode during remote shooting. However,
some FUNC. and MENU settings you have congured in advance
may be changed automatically.
● Movie shooting is not available.
238
ç Contents
● Any jerky subject motion shown on the smartphone due to the
connection environment will not affect recorded images.
● No AF frames are displayed. Capture a test image to check the
focus.
● Captured images are not transferred to the smartphone. Use the
smartphone to browse and import images from the camera.
239
ç Contents
Editing or Erasing Wi-Fi Settings
Edit or erase Wi-Fi settings as follows.
Editing Connection Information
1
Access the Wi-Fi menu and
choose a device to edit.
● Press the [ ] button.
● Press the [
][ ][ ][ ] buttons
to choose the icon of a device
to edit, and then press the [ ]
button.
2
Choose [Edit a Device].
● Press the [ ][ ] buttons to
choose [Edit a Device], and then
press the [ ] button.
3
Choose the device to edit.
● Press the [ ][ ] buttons to
choose the device to edit, and
then press the [ ] button.
240
ç Contents
4
Choose the item to edit.
● Press the [ ][ ] buttons to
choose the item to edit, and then
press the [ ] button.
● The items you can change
depend on the device or service.
Congurable Items
Connection
Web
Services
[Change Device Nickname]
(
=
241)
O O O O
–
[View Settings] (
=
189)
–
O
– – –
[Erase Connection Info]
(
=
241)
O O O O
–
O
: Congurable
–
: Not congurable
241
ç Contents
Changing a Device Nickname
You can change the device nickname (display name) that is
displayed on the camera.
● Following step 4 in “Editing
Connection Information”
(
=
239), choose [Change
Device Nickname] and press the
[ ] button.
● Select the input eld and press
the [
] button. Use the keyboard
displayed to enter a new
nickname (
=
58).
Erasing Connection Information
Erase connection information (information about devices that you
have connected to) as follows.
● Following step 4 in “Editing
Connection Information”
(
=
239), choose [Erase
Connection Info] and press the
[ ] button.
● After [Erase?] is displayed, press
the [
][ ] buttons to choose [OK],
and then press the [ ] button.
● The connection information will
be erased.
242
ç Contents
Changing the Camera Nickname
You can change the nickname of the camera displayed on the
connected device.
1
Choose [Wireless settings].
● Press the [ ] button and
choose [Wireless settings] on the
[ ] tab (
=
56).
2
Choose [Nickname].
● Press the [ ][ ] buttons to
choose [Nickname], and then
press the [ ] button.
3
Change the device nickname.
● Press the [ ] button. Use the
keyboard displayed to enter a
new nickname (
=
58).
243
ç Contents
● A message is displayed if the nickname you enter begins with
a symbol or space. Press the [
] button and enter a different
nickname.
● On the [Device Nickname] screen displayed when using the
Wi-Fi function for the rst time, choose the eld and press [
] to
display the keyboard. You can then enter a nickname.
244
ç Contents
Returning the Wi-Fi Settings to Default
Return the Wi-Fi settings to default if you transfer ownership of the
camera to another person, or dispose of it.
Resetting the Wi-Fi settings will also clear all Web service settings.
Be sure that you want to reset all Wi-Fi settings before using this
option.
1
Choose [Wireless settings].
● Press the [ ] button and
choose [Wireless settings] on the
[ ] tab (
=
56).
2
Choose [Reset Settings].
● Press the [ ][ ] buttons to
choose [Reset Settings], and then
press the [ ] button.
3
Restore the default settings.
● Press the [ ][ ] buttons to
choose [OK], and then press the
[ ] button.
● The Wi-Fi settings are now reset.
246
ç Contents
Setting Menu
Customize or adjust basic camera functions for greater
convenience
7
247
ç Contents
Adjusting Basic Camera Functions
Basic camera functions are congured on the [ ] tab of the
MENU (
=
56). Customize commonly used functions as desired,
for greater convenience.
Silencing Camera Operations
Silence camera sounds and movies as follows.
● Choose [Mute], and then choose
[On].
● Operation can also be silenced by holding down the [ ] button
as you turn the camera on.
● Sound is not played during movies (
=
136) if you mute camera
sounds. To restore sound during movies, press the [
] button.
Adjust volume with the [
][ ] buttons, as needed.
248
ç Contents
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
● Choose [Volume], and then press
the [
] button.
● Choose an item, and then press
the [
][ ] buttons to adjust the
volume.
Hiding Hints and Tips
Hints and tips are normally shown when you choose FUNC.
(
=
54) or MENU (
=
56) items. If you prefer, you can
deactivate this information.
● Choose [Hints & Tips], and then
choose [Off].
249
ç Contents
Date and Time
Adjust the date and time as follows.
● Choose [Date/Time], and then
press the [
] button.
● Press the [
][ ] buttons to
choose an option, and then press
the [ ][ ] buttons to adjust the
setting.
World Clock
To ensure that your shots will have the correct local date and time
when you travel abroad, simply register the destination in advance
and switch to that time zone. This convenient feature eliminates
the need to change the Date/Time setting manually.
Before using the world clock, be sure to set the date and time and
your home time zone, as described in “Setting the Date and Time”
(
=
33).
1
Specify your destination.
● Choose [Time Zone], and then
press the [ ] button.
● Press the [
][ ] buttons to
choose [ World], and then press
the [ ] button.
● Press the [
][ ] buttons to
choose the destination.
250
ç Contents
● To set daylight saving time
(1 hour ahead), choose [ ] by
pressing the [ ][ ] buttons, and
then choose [ ] by pressing the
[ ][ ] buttons.
● Press the [
] button.
2
Switch to the destination time
zone.
● Press the [ ][ ] buttons to
choose [ World], and then press
the [ ] button.
● [
] is now shown on the shooting
screen (
=
305).
● Adjusting the date or time while in [ ] mode (
=
35) will
automatically update your [
Home] time and date.
251
ç Contents
Lens Retraction Timing
The lens is normally retracted for safety about one minute after
you press the [ ] button in Shooting mode (
=
48). To have
the lens retracted immediately after you press the [ ] button, set
the retraction timing to [0 sec.].
● Choose [Lens Retraction], and
then choose [0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting
mode. When the camera is not in use, the screen quickly darkens
to reduce battery consumption.
1
Congure the setting.
● Choose [Eco Mode], and then
choose [On].
● [
] is now shown on the
shooting screen (
=
305).
252
ç Contents
● The screen darkens when
the camera is not used for
approximately two seconds;
approximately ten seconds after
darkening, the screen turns
off. The camera turns off after
approximately three minutes of
inactivity.
2
Shoot.
● To activate the screen and
prepare for shooting when the
screen is off but the lens is still
out, press the shutter button
halfway.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation
(Auto Power Down and Display Off, respectively) as needed
(
=
49).
● Choose [Power Saving], and then
press the [
] button.
● After choosing an item, press
the [
][ ] buttons to adjust it as
needed.
253
ç Contents
● To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
● The [Display Off] setting is applied even if you set [Auto Power
Down] to [Off].
● These power-saving functions are not available when you have
set Eco mode (
=
251) to [On].
Screen Brightness
Adjust screen brightness as follows.
● Choose [Disp. Brightness], and
then press the [
][ ] buttons to
adjust the brightness.
● For maximum brightness, press and hold the [ ] button for at
least one second when the shooting screen is displayed or when
in single-image display. (This will override the [Disp. Brightness]
setting on the [
] tab.) To restore the original brightness, press
and hold the [
] button again for at least one second or restart
the camera.
254
ç Contents
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen
normally shown when you turn the camera on.
● Choose [Start-up Image], and
then choose [Off].
Formatting Memory Cards
Before using a new memory card or a card formatted in another
device, you should format the card with this camera.
Formatting erases all data on a memory card. Before formatting,
copy images on the memory card to a computer, or take other
steps to back them up.
1
Access the [Format] screen.
● Choose [Format], and then press
the [ ] button.
255
ç Contents
2
Choose [OK].
● Press the [ ][ ] buttons to
choose [Cancel], press the [ ][ ]
buttons to choose [OK], and then
press the [ ] button.
3
Format the memory card.
● To begin the formatting process,
press the [ ][ ] buttons to
choose [OK], and then press the
[ ] button.
● When formatting is nished,
[Memory card formatting
complete] is displayed. Press the
[
] button.
● Formatting or erasing data on a memory card only changes le
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards,
please be cautious. Take steps to protect personal information if
necessary, as by physically destroying cards.
● The total card capacity indicated on the formatting screen may be
less than the advertised capacity.
256
ç Contents
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card
error] is displayed, the camera is not working correctly, card image
reading/writing is slower, continuous shooting is slower, or movie
recording suddenly stops. Low-level formatting erases all data on
a memory card. Before low-level formatting, copy images on the
memory card to a computer, or take other steps to back them up.
● On the screen in step 2
of “Formatting Memory
Cards” (
=
254), press the
[ ][ ] buttons to choose [Low
Level Format], and then press
the [ ][ ] buttons to select this
option. A [ ] icon is displayed.
● Follow steps 2 – 3 in “Formatting
Memory Cards” (
=
254) to
continue with the formatting
process.
● Low-level formatting takes longer than “Formatting Memory
Cards” (
=
254), because data is erased from all storage regions
of the memory card.
● You can cancel low-level formatting in progress by choosing
[Stop]. In this case, all data will be erased, but the memory card
can be used normally.
257
ç Contents
File Numbering
Your shots are automatically numbered in sequential order
(0001 – 9999) and saved in folders that store up to 2,000 images
each. You can change how the camera assigns le numbers.
● Choose [File Numbering], and
then choose an option.
Continuous
Images are numbered consecutively (until
the 9999th shot is taken/saved) even if you
switch memory cards.
Auto Reset
Image numbering is reset to 0001 if you
switch memory cards, or when a new folder
is created.
● Regardless of the option selected in this setting, shots may be
numbered consecutively after the last number of existing images
on newly inserted memory cards. To start saving shots from 0001,
use an empty (or formatted,
=
254) memory card.
258
ç Contents
Date-Based Image Storage
Instead of saving images in folders created each month, you can
have the camera create folders each day you shoot to store shots
taken that day.
● Choose [Create Folder], and then
choose [Daily].
● Images will now be saved in
folders created on the shooting
date.
Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation
information (
=
236), zoom bar (
=
62), and elsewhere from
m/cm to ft/in as needed.
● Choose [Units], and then choose
[ft/in].
259
ç Contents
Checking Certication Logos
Some logos for certication requirements met by the camera can
be viewed on the screen. Other certication logos are printed in
this guide, on the camera packaging, or on the camera body.
● Choose [Certication Logo
Display], and then press the [
]
button.
Display Language
Change the display language as needed.
● Choose [Language
], and then
press the [ ] button.
● Press the [
][ ][ ][ ] buttons
to choose a language, and then
press the [ ] button.
● You can also access the [Language] screen in Playback mode by
pressing and holding the [
] button and immediately pressing
the [
] button.
260
ç Contents
Adjusting Other Settings
The following settings can also be adjusted on the [ ] tab.
● [Video System] (
=
267)
● [Wireless settings] (
=
178)
Restoring Defaults
If you accidentally change a setting, you can restore default
camera settings.
1
Access the [Reset All]
screen.
● Choose [Reset All], and then
press the [ ] button.
2
Restore default settings.
● Press the [ ][ ] buttons to
choose [OK], and then press the
[ ] button.
● Default settings are now restored.
● The following functions are not restored to default settings.
- [
] tab settings [Date/Time] (
=
249), [Time Zone] (
=
249),
[Language
] (
=
259), and [Video System] (
=
267)
- Custom white balance data you have recorded (
=
116)
- Shooting mode (
=
96)
261
ç Contents
Accessories
Enjoy the camera in more ways with optional Canon
accessories and other compatible accessories sold
separately
8
262
ç Contents
System Map
PictBridge-Compatible
Printers
Connect Station
CS100*
3
Wrist Strap Battery Pack
NB-11LH*
1
Battery Charger
CB-2LF/CB-2LFE*
1
USB Cable (camera end: Mini-B)*
2
Memory Card
Card Reader
Computer
TV/Video
System
Included Accessories
Cables
AV Cable AVC-DC400
Flash
High-Power Flash
HF-DC2
Lens Cap
(with Cord)
*1 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable
IFC-400PCU).
*3 Use the latest rmware.
263
ç Contents
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when
used with genuine Canon accessories.
Canon shall not be liable for any damage to this product and/or
accidents such as re, etc., caused by the malfunction of non-
genuine Canon accessories (e.g., a leakage and/or explosion
of a battery pack). Please note that this warranty does not
apply to repairs arising out of the malfunction of non-genuine
Canon accessories, although you may request such repairs on a
chargeable basis.
264
ç Contents
Optional Accessories
The following camera accessories are sold separately. Note that
some accessories may no longer be available. Also, availability
varies by area.
Power Supplies
Battery Pack NB-11LH
● Rechargeable lithium-ion battery.
Battery Charger CB-2LF/CB-2LFE
● Charger for battery pack NB-11LH.
● The battery pack includes a convenient cover which you can
attach to know the charge status at a glance. Attach the cover so
that
is visible on a charged battery pack, and attach it so that
is not visible on an uncharged battery pack.
● Battery Pack NB-11L is also supported.
● Battery Charger CB-2LD and CB-2LDE are also supported.
● The battery charger can be used in areas with 100 – 240 V AC
power (50/60 Hz).
● For power outlets in a different format, use a commercially
available adapter for the plug. Never use an electrical transformer
designed for traveling, which may damage the battery pack.
265
ç Contents
Flash Unit
High-Power Flash HF-DC2
● External ash for illuminating
subjects that are out of range of
the built-in ash.
Other Accessories
Interface Cable IFC-400PCU
● For connecting the camera to a
computer or printer.
AV Cable AVC-DC400
● Connect the camera to a TV to
enjoy playback on the larger TV
screen.
266
ç Contents
Printer
Canon-Brand PictBridge-
Compatible Printers
● Even without using a computer,
you can print images by
connecting the camera directly to
a printer.
For details, visit your nearest
Canon retailer.
Photo Storage
Connect Station CS100
● In addition to saving images
you shot with your camera and
viewing them on a TV, this device
allows you to print from Wi-Fi
printers and share your images
on the Internet.
267
ç Contents
Using Optional Accessories
Playback on a TV
Still Images
Movies
Connecting the camera to a TV with the AV Cable AVC-DC400
(sold separately) enables you to view your shots on the larger
screen of the TV as you control the camera.
For details on connection or how to switch inputs, refer to the TV
manual.
● Some information may not be displayed when viewing images on
a TV (
=
307).
1
Make sure the camera and TV
are off.
2
Connect the camera to the
TV.
● On the TV, insert the cable plugs
fully into the video inputs as
shown.
● Make sure the cable plugs are in
video inputs of the same color.
268
ç Contents
● On the camera, open the terminal
cover and insert the cable plug
fully into the camera terminal.
3
Turn the TV on and switch to
video input.
● Switch the TV input to the video
input you connected the cable to
in step 2.
4
Turn the camera on.
● Press the [ ] button to turn the
camera on.
● Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
● When nished, turn off
the camera and TV before
disconnecting the cable.
● Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the [
] button and choose
[Video System] on the [
] tab.
269
ç Contents
Using the Software
After downloading the software from the Canon website and
installing it on your computer, you can do the following things.
● CameraWindow
- Import images and change camera settings
● Image Transfer Utility
- Set Image Sync (
=
230), receive images
● Map Utility
- Shows the GPS information recorded in images on a map
● When viewing or editing images on a computer, always use
software that supports the images shot on the camera (software
normally installed on the computer or general-use software).
Connect to a Computer Using a Cable
Checking Your Computer Environment
For detailed system requirements and compatibility information
for computers that can use this software, including support in new
operating systems, visit the Canon website.
Installing the Software
For instructions on installing the software, see “Installing the
Software” (
=
196).
270
ç Contents
Saving Images to a Computer
When you connect the camera to the computer using a retail USB
cable (the camera uses Mini-B), you can save your images to the
computer.
1
Connect the camera to the
computer.
● With the camera turned off, open
the cover (1). With the smaller
plug of the USB cable in the
orientation shown, insert the plug
fully into the camera terminal (2).
● Insert the larger plug of the USB
cable in the computer’s USB
port. For details about USB
connections on the computer,
refer to the computer user
manual.
2
Turn the camera on to access
CameraWindow.
● Press the [ ] button to turn the
camera on.
● Mac OS: CameraWindow is
displayed when a connection is
established between the camera
and computer.
(
1
)
(
2
)
271
ç Contents
● Windows: Follow the steps
introduced below.
● In the screen that is displayed,
click the change program link of
[
].
● Choose [Downloads Images From
Canon Camera] and then click
[OK].
● Double-click [
].
3
Save the images to the
computer.
● Click [Import Images from
Camera], and then click [Import
Untransferred Images].
● Images are now saved to the
Pictures folder on the computer,
in separate folders named by
date.
272
ç Contents
● After images are saved, close
CameraWindow, press the [ ]
button to turn the camera off, and
unplug the cable.
● To look at a image saved on your
computer, use a software (such
as one installed on your computer
by default or general software)
that supports images shot with a
camera.
● Windows 7: If the screen in step 2 is not displayed, click the [ ]
icon in the taskbar.
● Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
● Although you can save images to a computer simply by
connecting your camera to the computer without using the
software, the following limitations apply.
- It may take a few minutes after you connect the camera to the
computer until camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal
orientation.
- Image protection settings may be cleared from images saved
to a computer.
- Some problems may occur when saving images or image
information, depending on the operating system version, the
software in use, or image le sizes.
273
ç Contents
Printing Images
Still Images
Movies
Your shots can easily be printed by connecting the camera to a
printer. On the camera, you can specify images to set up batch
printing, prepare orders for photo development services, and
prepare orders or print images for photobooks.
A Canon SELPHY CP series compact photo printer is used
here for the sake of illustration. Screens displayed and available
functions vary by printer. Also refer to the printer manual for
additional information.
Easy Print
Still Images
Movies
Easily print your shots by connecting the camera to a PictBridge-
compatible printer (sold separately) with the USB cable.
1
Make sure the camera and
printer are off.
274
ç Contents
2
Connect the camera to the
printer.
● Open the terminal cover. Holding
the smaller cable plug in the
orientation shown, insert the plug
fully into the camera terminal.
● Connect the larger cable plug to
the printer. For other connection
details, refer to the printer
manual.
3
Turn the printer on.
4
Turn the camera on.
● Press the [ ] button to turn the
camera on.
5
Choose an image.
● Press the [ ][ ] buttons to
choose an image.
275
ç Contents
6
Access the printing screen.
● Press the [ ] button, choose [ ],
and press the [ ] button again.
7
Print the image.
● Press the [ ][ ] buttons to
choose [Print], and then press the
[ ] button.
● Printing now begins.
● To print other images, repeat the
above procedures starting from
step 5 after printing is nished.
● When you are nished printing,
turn the camera and printer off
and disconnect the cable.
● For Canon-brand PictBridge-compatible printers (sold separately),
see “Printer” (
=
266).
276
ç Contents
Conguring Print Settings
Still Images
Movies
1
Access the printing screen.
● Follow steps 1 – 6 in “Easy Print”
(
=
273) to access this screen.
2
Congure the settings.
● Press the [ ][ ] buttons to
choose an item, and then press
the [ ][ ] buttons to choose an
option.
Default Matches current printer settings.
Date Prints images with the date added.
File No. Prints images with the le number added.
Both
Prints images with both the date and le
number added.
Off
–
Default Matches current printer settings.
Off
–
On
Uses information from the time of shooting
to print under optimal settings.
Red-
Eye 1
Corrects red-eye.
No. of
Copies
Choose the number of copies to print.
277
ç Contents
Cropping
–
Specify a desired image area to print
(
=
277).
Paper
Settings
–
Specify the paper size, layout, and other
details (
=
278).
Cropping Images before Printing
Still Images
Movies
By cropping images before printing, you can print a desired image
area instead of the entire image.
1
Choose [Cropping].
● After following step 1 in
“Conguring Print Settings”
(
=
276) to access the printing
screen, choose [Cropping] and
press the [ ] button.
● A cropping frame is now
displayed, indicating the image
area to print.
2
Adjust the cropping frame as
needed.
● To resize the frame, move the
zoom lever.
● To move the frame, press the
[
][ ][ ][ ] buttons.
● To rotate the frame, press the [
]
button.
278
ç Contents
● Press the [ ] button, press
the [ ][ ] buttons to choose
[OK], and then press the [ ]
button.
3
Print the image.
● Follow step 7 in “Easy Print”
(
=
273) to print.
● Cropping may not be possible at small image sizes, or at some
aspect ratios.
● Dates may not be printed correctly if you crop images shot with
[Date Stamp
] selected.
Choosing Paper Size and Layout before Printing
Still Images
Movies
1
Choose [Paper Settings].
● After following step 1 in
“Conguring Print Settings”
(
=
276) to access the printing
screen, choose [Paper Settings]
and press the [ ] button.
279
ç Contents
2
Choose a paper size.
● Press the [ ][ ] buttons to
choose an option, and then press
the [ ] button.
3
Choose a type of paper.
● Press the [ ][ ] buttons to
choose an option, and then press
the [ ] button.
4
Choose a layout.
● Press the [ ][ ] buttons to
choose an option.
● When choosing [N-up], press
the [
][ ] buttons to specify the
number of images per sheet.
● Press the [
] button.
5
Print the image.
Available Layout Options
Default Matches current printer settings.
Bordered Prints with blank space around the image.
Borderless Borderless, edge-to-edge printing.
280
ç Contents
N-up Choose how many images to print per sheet.
ID Photo
Prints images for identication purposes.
Only available for images with a resolution of L and
an aspect ratio of 4:3.
Fixed Size
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format
prints.
Printing ID Photos
Still Images
Movies
1
Choose [ID Photo].
● Following steps 1 – 4 in
“Choosing Paper Size and Layout
before Printing” (
=
278), choose
[ID Photo] and press the [ ]
button.
2
Choose the long and short
side length.
● Press the [ ][ ] buttons to
choose an item. Choose the
length by pressing the [ ][ ]
buttons, and then press the [ ]
button.
281
ç Contents
3
Choose the printing area.
● Follow step 2 in “Cropping
Images before Printing” (
=
277)
to choose the printing area.
4
Print the image.
Printing Movie Scenes
Still Images
Movies
1
Access the printing screen.
● Follow steps 1 – 6 in “Easy Print”
(
=
273) to choose a movie. This
screen is displayed.
2
Choose a printing method.
● Press the [ ][ ] buttons to
choose [ ], and then press the
[ ][ ] buttons to choose the
printing method.
3
Print the image.
282
ç Contents
Movie Printing Options
Single Prints the current scene as a still image.
Sequence
Prints a series of scenes, a certain interval apart,
on a single sheet of paper. You can also print the
folder number, le number, and elapsed time for the
frame by setting [Caption] to [On].
● To cancel printing, press the [ ] button, choose [OK], and then
press the [
] button again.
● The screen in step 1 can also be displayed by the following
procedure: Display the movie scene that you want to print by
following steps 2 – 5 in “Viewing” (
=
136), press the [ ][ ]
buttons to choose [
] from the movie control panel, then press
the [
] button.
283
ç Contents
Adding Images to the Print List (DPOF)
Still Images
Movies
Batch printing (
=
287) and ordering prints from a photo
development service can be set up on the camera. Choose up to
998 images on a memory card and congure relevant settings,
such as the number of copies, as follows. The printing information
you prepare this way will conform to DPOF (Digital Print Order
Format) standards.
Conguring Print Settings
Still Images
Movies
Specify the printing format, whether to add the date or le number,
and other settings as follows. These settings apply to all images in
the print list.
● Press the [
] button, and
then choose [Print Settings]
on the [ ] tab. Choose and
congure items as desired
(
=
56).
Print Type
Standard One image is printed per sheet.
Index
Smaller versions of multiple
images are printed per sheet.
Both
Both standard and index formats
are printed.
284
ç Contents
Date
On
Images are printed with the
shooting date.
Off
–
File No.
On
Images are printed with the le
number.
Off
–
Clear
DPOF data
On
All image print list settings are
cleared after printing.
Off
–
● Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
● [
] may be displayed on the camera to warn you that the
memory card has print settings that were congured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
● Specifying [Index] will prevent you from choosing [On] for both
[Date] and [File No.] at the same time.
● Index printing is not available on some Canon-brand PictBridge-
compatible printers (sold separately).
● The date is printed in a format matching setting details in
[Date/Time] on the [
] tab (
=
33).
285
ç Contents
Setting Up Printing for Individual Images
Still Images
Movies
1
Choose [Select Images &
Qty.].
● Press the [ ] button,
choose [Select Images & Qty.] on
the [ ] tab, and then press the
[ ] button.
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button.
● You can now specify the number
of copies.
● If you specify index printing for
the image, it is labeled with a [
]
icon. To cancel index printing for
the image, press the [ ] button
again. [ ] is no longer displayed.
3
Specify the number of prints.
● Press the [ ][ ] buttons to
specify the number of prints (up
to 99).
● To set up printing for other images
and specify the number of prints,
repeat steps 2 – 3.
286
ç Contents
● Printing quantity cannot be
specied for index prints. You
can only choose which images to
print, by following step 2.
● When nished, press the
[
] button to return to the
menu screen.
Setting Up Printing for a Range of Images
Still Images
Movies
● Following step 1 in “Setting Up
Printing for Individual Images”
(
=
285), choose [Select Range]
and press the [ ] button.
● Follow steps 2 – 3 in “Selecting
a Range” (
=
154) to specify
images.
● Press the [
][ ] buttons to
choose [Order], and then press
the [ ] button.
Setting Up Printing for All Images
Still Images
Movies
● Following step 1 in “Setting Up
Printing for Individual Images”
(
=
285), choose [Select All
Images] and press the [ ] button.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
287
ç Contents
Clearing All Images from the Print List
● Following step 1 in “Setting Up
Printing for Individual Images”
(
=
285), choose [Clear All
Selections] and press the [ ]
button.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
Printing Images Added to the Print List (DPOF)
Still Images
Movies
● When images have been added to
the print list (
=
283 –
=
286),
this screen is displayed after
you connect the camera to a
PictBridge-compatible printer.
Press the [ ][ ] buttons to
choose [Print now], and then
simply press the [ ] button to
print the images in the print list.
● Any DPOF print job that you
temporarily stop will be resumed
from the next image.
288
ç Contents
Adding Images to a Photobook
Still Images
Movies
Photobooks can be set up on the camera by choosing up to 998
images on a memory card and importing them into the software
CameraWindow (
=
269) on your computer, where they are
stored in their own folder. This is convenient when ordering printed
photobooks online or printing photobooks with your own printer.
Choosing a Selection Method
● Press the [ ] button,
choose [Photobook Set-up] on the
[ ] tab, and then choose how
you will select images.
● [ ] may be displayed on the camera to warn you that the
memory card has print settings that were congured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
289
ç Contents
Adding Images Individually
Still Images
Movies
1
Choose [Select].
● Following the procedure in
“Choosing a Selection Method”
(
=
288), choose [Select] and
press the [ ] button.
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button.
● [
] is displayed.
● To remove the image from the
photobook, press the [
] button
again. [ ] is no longer displayed.
● Repeat this process to specify
other images.
● When nished, press the
[
] button to return to the
menu screen.
290
ç Contents
Adding All Images to a Photobook
Still Images
Movies
● Following the procedure in
“Choosing a Selection Method”
(
=
288), choose [Select All
Images] and press the [ ] button.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
Removing All Images from a Photobook
Still Images
Movies
● Following the procedure in
“Choosing a Selection Method”
(
=
288), choose [Clear All
Selections] and press the [ ]
button.
● Press the [
][ ] buttons to
choose [OK], and then press the
[ ] button.
291
ç Contents
Appendix
Helpful information when using the camera
9
292
ç Contents
Troubleshooting
If you think there is a problem with the camera, rst check the
following. If the items below do not solve your problem, contact a
Canon Customer Support Help Desk.
Power
Nothing happens when the power button is pressed.
● Conrm that the battery pack is charged (
=
27).
● Conrm that the battery pack is inserted facing the correct way
(
=
30).
● Conrm that the memory card/battery cover is fully closed (
=
30).
● Dirty battery terminals reduce battery performance. Try cleaning the
terminals with a cotton swab and reinserting the battery pack a few
times.
The battery pack runs out of power quickly.
● Battery performance decreases at low temperatures. Try warming the
battery pack a little by putting it in your pocket, for example, ensuring
that the terminals do not touch any metal objects.
● Dirty battery terminals reduce battery performance. Try cleaning the
terminals with a cotton swab and reinserting the battery pack a few
times.
● If these measures do not help and the battery pack still runs out of power
soon after charging, it has reached the end of its life. Purchase a new
battery pack.
The lens is not retracted.
● Do not open the memory card/battery cover while the camera is on.
Close the cover, turn the camera on, and then turn it off again (
=
30).
293
ç Contents
The battery pack is swollen.
● Battery swelling is normal and does not pose any safety concerns.
However, if battery swelling prevents the battery pack from tting in the
camera, contact a Canon Customer Support Help Desk.
Display on a TV
Camera images look distorted or not displayed on a TV (
=
267).
Shooting
Cannot shoot.
● In Playback mode (
=
135), press the shutter button halfway (
=
50).
Strange display on the screen under low light (
=
52).
Strange display on the screen when shooting.
● The following display problems are not recorded in still images but are
recorded in movies. Please take note of this.
- The screen may darken under bright light.
- The screen may icker under uorescent or LED lighting.
- Purplish banding may appear on the screen if you compose a shot
that includes a bright light source.
No date stamp is added to images.
● Congure the [Date Stamp ] (
=
80). Note that date stamps are not
added to images automatically, merely because you have congured the
[Date/Time] setting (
=
33).
● Date stamps are not added in shooting modes (
=
319) in which
[Date Stamp
] cannot be congured (
=
80).
[ ] ashes on the screen when the shutter button is pressed, and
shooting is not possible (
=
67).
294
ç Contents
[ ] is displayed when the shutter button is pressed halfway
(
=
67).
● Set [IS Mode] to [Continuous] (
=
133).
● Raise the ash and set the ash mode to [
] (
=
130).
● Increase the ISO speed (
=
113).
● Mount the camera on a tripod or take other measures to keep it still.
Additionally, you should set [IS Mode] to [Off] when using a tripod or
other means to secure the camera (
=
133).
Shots are out of focus.
● Press the shutter button halfway to focus on subjects before pressing it
all the way down to shoot (
=
50).
● Make sure subjects are within focus range (
=
333).
● Set [AF-assist Beam] to [On] (
=
89).
● Conrm that unneeded functions such as macro are deactivated.
● Try shooting with Focus Lock (
=
123).
No AF frames are displayed and the camera does not focus when
the shutter button is pressed halfway.
● To have AF frames displayed and the camera focus correctly, try
composing the shot with higher-contrast subject areas centered before
you press the shutter button halfway. Otherwise, try pressing the shutter
button halfway repeatedly.
Subjects in shots look too dark.
● Raise the ash and set the ash mode to [ ] (
=
130).
● Adjust brightness by using exposure compensation (
=
111).
● Adjust contrast by using i-Contrast (
=
114,
=
171).
● Use spot metering (
=
112).
Subjects look too bright, highlights are washed-out.
● Lower the ash and set the ash mode to [ ] (
=
62).
● Adjust brightness by using exposure compensation (
=
111).
● Use spot metering (
=
112).
● Reduce the lighting on subjects.
295
ç Contents
Shots look too dark despite the ash ring (
=
67).
● Shoot within ash range (
=
330).
● Increase the ISO speed (
=
113).
Subjects in ash shots look too bright, highlights are washed-out.
● Shoot within ash range (
=
330).
● Lower the ash and set the ash mode to [
] (
=
62).
White spots appear in ash shots.
● This is caused by light from the ash reecting off dust or airborne
particles.
Shots look grainy.
● Lower the ISO speed (
=
113).
Subjects are affected by red-eye.
● Set [Red-Eye Lamp] to [On] (
=
90). Note that while the red-eye
reduction lamp (
=
6) is lit (for about one second), it is not possible
to shoot, because the lamp is counteracting red-eye. For best results,
have subjects look at the red-eye reduction lamp. Also try increasing the
lighting in indoor scenes and shooting at closer range.
● Edit images using red-eye correction (
=
173).
Recording to the memory card takes too long, or continuous
shooting is slower.
● Use the camera to perform low-level formatting of the memory card
(
=
256).
Shooting settings or FUNC. menu settings are not available.
● Available setting items vary by shooting mode. Refer to “Functions
Available in Each Shooting Mode”, “FUNC. Menu”, and “Shooting Tab”
(
=
310 –
=
319).
296
ç Contents
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
● Use the camera to format the memory card, or switch to a card
that supports high-speed recording. Note that even if the elapsed
time display is incorrect, the length of movies on the memory card
corresponds to the actual recording time (
=
254,
=
335).
[ ] is displayed and shooting stops automatically.
● The camera’s internal memory buffer lled up as the camera could not
record to the memory card quickly enough. Try one of the following
measures.
- Use the camera to perform low-level formatting of the memory card
(
=
256).
- Lower the image quality (
=
85).
- Switch to a memory card that supports high-speed recording
(
=
335).
Zooming is not possible.
● Zooming is not possible when shooting movies in [ ] mode (
=
100).
Playback
Playback is not possible.
● Image or movie playback may not be possible if a computer is used to
rename les or alter the folder structure.
Playback stops, or audio skips.
● Switch to a memory card that you have performed low-level formatting
on with the camera (
=
256).
● There may be brief interruptions when playing movies copied to memory
cards that have slow read speeds.
● When movies are played on a computer, frames may be dropped and
audio may skip if computer performance is inadequate.
297
ç Contents
Sound is not played during movies.
● Adjust the volume (
=
248) if you have activated [Mute] (
=
247) or the
sound in the movie is faint.
● No sound is played for movies shot in [
] mode (
=
100) because
audio is not recorded in this mode.
Memory Card
The memory card is not recognized.
● Restart the camera, with the memory card in it (
=
48).
Computer
Cannot transfer images to a computer.
● When attempting to transfer images to the computer via a cable, try
reducing the transfer speed as follows.
- Press the [
] button to enter Playback mode. Hold the [ ]
button down as you press the [
] and [ ] buttons at the same time.
On the next screen, press the [
][ ] buttons to choose [B], and then
press the [
] button.
Wi-Fi
Cannot access the Wi-Fi menu by pressing the [
] button.
● The Wi-Fi menu cannot be accessed while the camera is connected to a
printer or computer via a cable. Disconnect the cable.
Cannot add a device/destination.
● A total of 20 items of connection information can be added to the
camera. Erase unneeded connection information from the camera rst,
and then add new devices/destinations (
=
239).
● Use a computer or smartphone to register Web services (
=
209).
298
ç Contents
● To add a smartphone, rst install the dedicated application Camera
Connect on your smartphone (
=
180).
● To add a computer, rst install the software CameraWindow on your
computer. Also check your computer and Wi-Fi environment and settings
(
=
196,
=
200).
● Do not use the camera near sources of Wi-Fi signal interference, such
as microwave ovens, Bluetooth devices, or other equipment operating
on the 2.4 GHz band.
● Bring the camera closer to the other device you are trying to connect to
(such as the access point), and make sure there are no objects between
the devices.
Cannot connect to the access point.
● Conrm that the access point channel is set to a channel supported by
the camera (
=
329). Note that instead of auto channel assignment, it is
advisable to specify a supported channel manually.
Cannot send images.
● The destination device has insufcient storage space. Increase the
storage space on the destination device and resend the images.
● The write-protect switch of the memory card in the destination camera is
set to the locked position. Slide the write-protect switch to the unlocked
position.
● Images are not sent to CANON iMAGE GATEWAY or other Web
services if you move or rename image les or folders on the computer
that received images sent using Image Sync via an access point
(
=
230). Before moving or renaming these image les or folders on
the computer, make sure the images have already been sent to CANON
iMAGE GATEWAY or other Web services.
Cannot resize images for sending.
● Images cannot be resized to larger than their original resolution.
● Movies cannot be resized.
299
ç Contents
Images take a long time to send./The wireless connection is
disrupted.
● Multiple images may take a long time to send. Try resizing the images to
reduce sending time (
=
228).
● Movies may take a long time to send.
● Do not use the camera near sources of Wi-Fi signal interference, such
as microwave ovens, Bluetooth devices, or other equipment operating
on the 2.4 GHz band. Note that images may take a long time to send
even when [
] is displayed.
● Bring the camera closer to the other device you are trying to connect to
(such as the access point), and make sure there are no objects between
the devices.
No notication message is received on a computer or smartphone
after adding CANON iMAGE GATEWAY to the camera.
● Make sure the e-mail address you entered is correct, and try adding the
destination again.
● Check the e-mail settings on the computer or smartphone. If they are
congured to block e-mail from certain domains, you may not be able to
receive the notication message.
Want to erase Wi-Fi connection information before disposing of
the camera or giving it to someone else.
● Reset the Wi-Fi settings (
=
244).
300
ç Contents
On-Screen Messages
If an error message is displayed, respond as follows.
Shooting or Playback
No memory card
● The memory card may be inserted facing the wrong way. Reinsert the
memory card facing the correct way (
=
30).
Memory card locked
● The write-protect switch of the memory card is set to the locked position.
Switch the write-protect switch to the unlocked position (
=
30).
Cannot record!
● Shooting was attempted without a memory card in the camera. To shoot,
insert a memory card facing the correct way (
=
30).
Memory card error (
=
256)
● If the same error message is displayed even after you have formatted a
supported memory card (
=
3) and have inserted it facing the correct
way (
=
30), contact a Canon Customer Support Help Desk.
Insufcient space on card
● There is not enough free space on the memory card to shoot (
=
62,
=
94,
=
109) or edit images (
=
166). Either erase unneeded
images (
=
157) or insert a memory card with enough free space
(
=
30).
Charge the battery (
=
27)
No Image.
● The memory card does not contain any images that can be displayed.
Protected! (
=
151)
301
ç Contents
Unidentied Image/Incompatible JPEG/Image too large/Cannot
play back MP4
● Unsupported or corrupt images cannot be displayed.
● It may not be possible to display images that were edited or renamed on
a computer, or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shufe/
Cannot rotate/Cannot modify image/Cannot modify/Cannot assign
to category/Unselectable image
● The following functions may be unavailable for images that were
renamed or already edited on a computer, or images shot with another
camera. Note that starred (*) functions are not available for movies.
Magnify* (
=
145), Smart Shufe* (
=
149), Rotate* (
=
161),
Favorites (
=
164), Edit* (
=
166), Print List* (
=
283), and
Photobook Set-up* (
=
288)
Invalid selection range
● When specifying a range for image selection (
=
154,
=
159,
=
286), you attempted to choose an initial image that was after the
nal image, or vice-versa.
Exceeded selection limit
● More than 998 images were selected for Print List (
=
283) or
Photobook Set-up (
=
288). Choose 998 images or less.
● Print List (
=
283) or Photobook Set-up (
=
288) settings could not be
saved correctly. Reduce the number of selected images and try again.
● You attempted to choose more than 500 images in Protect (
=
151),
Erase (
=
157), Favorites (
=
164), Print List (
=
283), or Photobook
Set-up (
=
288).
Naming error!
● The folder could not be created or images could not be recorded,
because the highest supported folder number (999) for storing images
on the card has been reached and the highest supported image number
(9999) for images in folders has been reached. On the [
] tab, change
[File Numbering] to [Auto Reset] (
=
257), or format the memory card
(
=
254).
302
ç Contents
Lens Error
● This error may occur if the lens is held while it is moving, or when the
camera is used in dusty or sandy locations.
● Frequent display of this error message may indicate camera damage. In
this case, contact a Canon Customer Support Help Desk.
A camera error was detected (error number)
● If this error message is displayed immediately after a shot, the image
may not have been saved. Switch to Playback mode to check for the
image.
● Frequent display of this error message may indicate camera damage.
In this case, write down the error number (Exx) and contact a Canon
Customer Support Help Desk.
File Error
● Correct printing (
=
273) may not be possible for photos from other
cameras or images that have been altered using computer software,
even if the camera is connected to the printer.
Print error
● Check the paper size setting (
=
278). If this error message is displayed
when the setting is correct, restart the printer and complete the setting
on the camera again.
Ink absorber full
● Contact a Canon Customer Support Help Desk to request assistance
with ink absorber replacement.
Wi-Fi
Connection failed
● No access points were recognized. Check the access point settings
(
=
200).
● A device could not be found. Turn the camera off and on again, and retry
the connection.
● Check the device you want to connect to and make sure it is ready for
connection.
303
ç Contents
Cannot determine access point
● The WPS buttons on numerous access points were pressed
simultaneously. Try reconnecting again.
No access points found
● Check to make sure that the access point is turned on.
● When connecting to an access point manually, make sure that you
entered the correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
● Check the access point security settings (
=
200).
IP address conict
● Reset the IP address so that it does not conict with another.
Disconnected/Receiving failed/Sending failed
● You may be in an environment where Wi-Fi signals are obstructed.
● Do not use the camera near microwave ovens, Bluetooth devices, and
other devices that operate on the 2.4 GHz band.
● Bring the camera closer to the other device you are trying to connect to
(such as the access point), and make sure there are no objects between
the devices.
● Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
● If the same error message is displayed even when you have inserted
a formatted memory card facing the correct way, contact a Canon
Customer Support Help Desk.
Receiving failed
Insufcient space on card
● There is not enough free space on the memory card in the target camera
to receive images. Erase images to create space on the memory card, or
insert a memory card with sufcient space.
304
ç Contents
Receiving failed
Memory card locked
● The write-protect switch of the memory card in the camera to receive the
images is set to the locked position. Slide the write-protect switch to the
unlocked position.
Receiving failed
Naming error!
● When the highest folder number (999), and the highest image number
(9999) have been reached on the receiving camera, images cannot be
received.
Insufcient space on server
● Delete unnecessary images uploaded to CANON iMAGE GATEWAY to
create space.
● Save the images sent via Image Sync (
=
230) to your computer.
Check network settings
● Check to make sure your computer can connect to the Internet with the
current network settings.
305
ç Contents
On-Screen Information
Shooting (Information Display)
(
6
)
(
7
)
(
8
)
(
9
) (
10
) (
11
) (
12
) (
13
) (
14
)
(
15
)
(
16
)
(
17
)
(
18
)
(
19
)
(
20
)
(
21
) (
23
)(
22
) (
24
) (
25
)
(
26
)
(
27
)
(
28
) (
29
)
(
30
)
(
1
)
(
2
)
(
3
)
(
4
)
(
5
)
(1) Battery level (
=
306)
(2) White balance (
=
115)
(3) My Colors (
=
117)
(4) Drive mode (
=
81)
(5) Eco mode (
=
251)
(6) Self-timer (
=
76)
(7) Camera shake warning
(
=
67)
(8) Metering method (
=
112)
(9) Still image compression
(
=
132), Resolution
(
=
84)
(10) Recordable shots (
=
334)
306
ç Contents
(11) Movie quality (
=
85)
(12) Remaining time (
=
335)
(13) Zoom magnification (
=
74),
Digital tele-converter
(
=
122)
(14) Focus range (
=
120,
=
121)
(15) Shooting mode (
=
310),
Scene icon (
=
69)
(16) Flash mode (
=
130)
(17) AF frame (
=
123), Spot AE
point frame (
=
112)
(18) Date stamp (
=
80)
(19) ISO speed (
=
113)
(20) i-Contrast (
=
114)
(21) Grid lines (
=
86)
(22) AE lock (
=
111)
(23) Shutter speed
(24) Aperture value
(25) Exposure compensation level
(
=
111)
(26) Zoom bar (
=
62)
(27) IS mode icon (
=
71)
(28) Time zone (
=
249)
(29) Image stabilization (
=
133)
(30) Exposure compensation bar
(
=
111)
Battery Level
An on-screen icon or message indicates the battery charge level.
Display Details
Sufcient charge.
Slightly depleted, but sufcient.
(Blinking red)
Nearly depleted. Charge the battery
pack soon.
[Charge the battery]
Depleted. Charge the battery pack
immediately.
307
ç Contents
Playback (Detailed Information Display)
(
1
)
(
2
)
(
3
)
(
4
)
(
5
)
(
6
)
(
7
)
(
8
) (
9
)(
10
) (
11
)
(
12
)
(
13
)
(
14
)
(
15
)
(
16
)
(
17
)
(
18
)
(
19
)
(
21
)(
22
) (
23
) (
24
) (
25
)(
20
)
(1) Movie recording (
=
62,
=
136)
(2) Shooting mode (
=
310)
(3) ISO speed (
=
113),
Playback speed (
=
101)
(4) Exposure compensation level
(
=
111)
(5) White balance (
=
115)
(6) Histogram (
=
140)
(7) Compression (image quality)
(
=
132) / Resolution
(
=
84), MP4 (movies)
(8) Image Sync (
=
230)
(9) Battery level (
=
306)
(10) Metering method (
=
112)
(11) Folder number - File number
(
=
257)
(12) Current image no. / Total no.
of images
(13) Shutter speed (still images),
Image quality / Frame rate
(movies) (
=
85)
(14) Aperture value
(15) Flash (
=
130)
(16) i-Contrast (
=
114,
=
171)
308
ç Contents
(17) Focus range (
=
120,
=
121)
(18) File size
(19) Still images: Resolution
(
=
334) Movies: Playback
time (
=
335)
(20) Image editing (
=
166)
(21) Protection (
=
151)
(22) Favorites (
=
164)
(23) My Colors (
=
117,
=
170)
(24) Red-eye correction (
=
173)
(25) Shooting date/time (
=
33)
● Some information may not be displayed when viewing images on
a TV (
=
267).
309
ç Contents
Summary of Movie Control Panel
The following operations are available on the movie control panel,
accessed as described in “Viewing” (
=
136).
Exit
Playback
Slow Motion (Press the [ ][ ] buttons to adjust the
playback speed. No sound is played.)
Skip Backward* (To continue skipping backward, keep
holding down the [ ] button.)
Previous Frame (For fast-rewind, keep holding down the
[ ] button.)
Next Frame (For fast-forward, keep holding down the [ ]
button.)
Skip Forward* (To continue skipping forward, keep holding
down the [ ] button.)
Edit (
=
175)
Shown when the camera is connected to a PictBridge-
compatible printer (
=
273).
* Displays the frame approx. 4 sec. before or after the current frame.
● To skip forward or back during movie playback, press the [ ][ ]
buttons.
314
ç Contents
Shooting Mode
Function
Metering Method (
=
112)
O O O O O
– – – – –
My Colors (
=
117)
O O O O O
*
1
*
1
*
2
– – – – –
White Balance (
=
115)
O O O O O
O
– – – –
ISO Speed (
=
113)
O O O O O
– – – – –
Self-Timer (
=
76)
O O O O O
O O O O O
Self-Timer Settings (
=
78)
O O O O O
Drive Mode (
=
81)
O O O O O
O O O O O
315
ç Contents
Shooting Mode
Function
Metering Method (
=
112)
O O O O
– – – –
My Colors (
=
117)
O O O O
*
1
*
1
*
2
– – –
O
White Balance (
=
115)
O O O O
– – –
O
ISO Speed (
=
113)
O O O
–
– – –
O
Self-Timer (
=
76)
O O O O
O O O O
Self-Timer Settings (
=
78)
O O O O
Drive Mode (
=
81)
O O O O
O O O
–
*1 White balance is not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red,
green, blue, and skin tone.
319
ç Contents
Shooting Tab
Shooting Mode
Function
AF Frame (
=
123)
Face AiAF
O O O O O
Tracking AF
–
O O O
–
Center
–
O O O
–
AF Frame Size (
=
123)
*
1
Normal
–
O O O
–
Small
–
O O O
–
Digital Zoom (
=
74)
Standard
O O O O O
Off
*
2
O O O O O
Tele-Converter 1.6x/Tele-Converter
2.0x
–
O O
– –
AF-Point Zoom (
=
87)
On
O O O O O
Off
O O O O O
Servo AF (
=
127)
On
–
O O O
–
Off
*
3
O O O O
Continuous AF (
=
129)
On
O O O O O
Off
–
O O O
–
320
ç Contents
Shooting Mode
Function
AF Frame (
=
123)
Face AiAF
O
– –
O O
Tracking AF
O
– – –
O
Center
O O
–
O O
AF Frame Size (
=
123)
*
1
Normal
O O
–
O O
Small
O
– –
O O
Digital Zoom (
=
74)
Standard
– – – – –
Off
*
2
O O O O O
Tele-Converter 1.6x/Tele-Converter
2.0x
– – – – –
AF-Point Zoom (
=
87)
On
O
– – –
O
Off
O O O O O
Servo AF (
=
127)
On
O
– – –
O
Off
O O O O O
Continuous AF (
=
129)
On
–
O O O O
Off
O O O O O
321
ç Contents
Shooting Mode
Function
AF Frame (
=
123)
Face AiAF
O O
–
O
Tracking AF
O O
–
O
Center
O O O O
AF Frame Size (
=
123)
*
1
Normal
O O
–
O
Small
O O
–
O
Digital Zoom (
=
74)
Standard
– –
O O
Off
*
2
O O O O
Tele-Converter 1.6x/Tele-Converter
2.0x
– – – –
AF-Point Zoom (
=
87)
On
O O
–
O
Off
O O O O
Servo AF (
=
127)
On
O O
– –
Off
O O O O
Continuous AF (
=
129)
On
O O
–
O
Off
O O O O
*1 Available when the AF frame is set to [Center].
*2 When transitioning to a shooting mode where zoom is unavailable,
unlocks zoom
*3 [On] when subject movement is detected.
322
ç Contents
Shooting Mode
Function
AF-assist Beam (
=
89)
On
O O O O O
Off
O O O O O
Flash Settings (
=
90)
Red-Eye Lamp On/Off
O O O O O
i-Contrast (
=
114)
Auto
O O
– – –
Off
–
O O O O
Review Image after Shooting (
=
91)
Display Time
Off/Quick/2 sec./
4 sec./8 sec./Hold
O O O O O
Display Info Off/Detailed
O O O O O
Grid Lines (
=
86)
On/Off
O O O O O
IS Settings (
=
133)
IS Mode
Continuous/Off
O O O O O
Shoot Only
–
O O O O
Dynamic IS
1
O O O O O
2
O O O O O
Date Stamp (
=
80)
Off
O O O O O
Date/Date & Time
O O O O O
323
ç Contents
Shooting Mode
Function
AF-assist Beam (
=
89)
On
O O O O O
Off
O O O O O
Flash Settings (
=
90)
Red-Eye Lamp On/Off
O O O O O
i-Contrast (
=
114)
Auto
O
– – – –
Off
–
O O O O
Review Image after Shooting (
=
91)
Display Time
Off/Quick/2 sec./
4 sec./8 sec./Hold
O O O O O
Display Info Off/Detailed
O O O O O
Grid Lines (
=
86)
On/Off
O O O O O
IS Settings (
=
133)
IS Mode
Continuous/Off
O O O O O
Shoot Only
O O O O O
Dynamic IS
1
O O
–
O O
2
O O O O O
Date Stamp (
=
80)
Off
O O O O O
Date/Date & Time
O
– – – –
324
ç Contents
Shooting Mode
Function
AF-assist Beam (
=
89)
On
O O
–
O
Off
O O O O
Flash Settings (
=
90)
Red-Eye Lamp On/Off
O O
–
O
i-Contrast (
=
114)
Auto
– – – –
Off
O O O O
Review Image after Shooting (
=
91)
Display Time
Off/Quick/2 sec./
4 sec./8 sec./Hold
O O O O
Display Info Off/Detailed
O O O O
Grid Lines (
=
86)
On/Off
O O O O
IS Settings (
=
133)
IS Mode
Continuous/Off
O O O O
Shoot Only
O O O O
Dynamic IS
1
O O O O
2
O O O O
Date Stamp (
=
80)
Off
O O O O
Date/Date & Time
– –
O O
325
ç Contents
Set Up Tab
Options Reference Page
Mute
=
247
Volume
=
248
Hints & Tips
=
248
Date/Time
=
33
Time Zone
=
249
Lens Retraction
=
251
Eco Mode
=
251
Power Saving
=
49,
=
252
Disp. Brightness
=
253
Start-up Image
=
254
Format
=
254,
=
256
File Numbering
=
257
Create Folder
=
258
Units
=
258
Video System
=
267
Wireless settings
=
178
Certication Logo Display
=
259
Language
=
37
Reset All
=
260
327
ç Contents
Print Tab
Options Reference Page
Printing
–
Select Images & Qty.
=
285
Select Range
=
286
Select All Images
=
286
Clear All Selections
=
287
Print Settings
=
283
Playback Mode FUNC. Menu
Options Reference Page
Rotate
=
161
Protect
=
151
Favorites
=
164
Printing
=
273
Play Movie
=
136
Smart Shufe
=
149
Image Search
=
143
Slideshow
=
147
328
ç Contents
Handling Precautions
● The camera is a high-precision electronic device. Avoid
dropping it or subjecting it to strong impact.
● Never bring the camera near magnets, motors, or other
devices that generate strong electromagnetic elds. The
electromagnetic elds may cause malfunction in the camera or
erase image data.
● If water droplets or dirt adheres to the camera or screen, wipe
with a dry soft cloth, such as an eyeglass cloth. Do not rub
hard or apply force.
● Never use cleaners containing organic solvents to clean the
camera or screen.
● Use a blower brush to remove dust from the lens. If cleaning is
difcult, contact a Canon Customer Support Help Desk.
● When you suddenly transfer the camera from cold place to hot
environments, condensation (water drops) may form on the
camera. To prevent condensation from forming on the camera
after sudden temperature changes, put the camera in an
airtight, resealable plastic bag and let it gradually adjust to the
temperature before removing it from the bag.
● If condensation does form on the camera, stop using it
immediately. Continuing to use the camera in this state may
damage it. Remove the battery pack and memory card, and
wait until the moisture has evaporated before resuming use.
● Store unused battery packs in a plastic bag or other container.
To maintain battery performance if you will not use the battery
pack for some time, charge it about once a year and then use
the camera until it runs out of power before storing the battery
pack.
329
ç Contents
Specications
Camera
Image Sensor
Camera Effective Pixels (Max.)
(Image processing may cause a decrease
in the number of pixels.)
........................Approx. 20.0 megapixels
Total Pixels........................................Approx. 20.5 megapixels
Image Size ........................................ 1/2.3 type
Lens
Focal Length
(35mm lm equivalent) .......................... 4.3 – 180.6 mm
(24 – 1008 mm)
Zoom Magnication ..........................42x
Digital zoom
Magnication.....................................Approx. 4x
Max. Magnication
(digital x optical zoom) ...................... Approx. 168x
Focal Length
(max. telephoto, 35mm lm equivalent) .... Equivalent to approx.
4032 mm
Screen (Monitor)
Type .................................................. TFT color liquid crystal
Screen Size ......................................3.0 type
Effective Pixels .................................Approx. 230,000 dots
330
ç Contents
Continuous Shooting
Speed
(Varies depending on the subject, zoom
position, and other shooting factors,
as well as memory card brands.)
............ Normal Continuous
Shooting in Auto/P modes:
Approx. 0.5 shots/sec.
Normal Continuous
Shooting Low Light mode:
Approx. 2.2 shots/sec.
Built-In Flash
Flash Range (Wide angle end) ......... 50 cm – 5.0 m (1.6 – 16 ft.)
Flash Range (Telephoto end) ...........1.4 m – 2.7 m (4.6 – 8.9 ft.)
Shutter Speed
Auto Mode (automatic settings) ........ 1 – 1/4000 sec.
Range in all shooting modes
Maximum ......................................15 sec.
Minimum .......................................1/4000 sec.
Speed (unit: sec.) .................................. Long Shutter Mode
15, 13, 10, 8, 6, 5, 4, 3.2,
2.5, 2, 1.6, 1.3, 1
Aperture
F number .......................................... 3.5 – 8.0 (W)
6.6 – 8.0 (T)
AF
AF frame ........................................... Face AiAF (number of AF
frames: max.9), Tracking
AF, Center
331
ç Contents
File Format ............................................ Design rule for Camera
File system (DCF)
compliant; DPOF (version
1.1) compatible
Data Type (Still Images)
Image File Format.............................Exif 2.3 (DCF 2.0)
Image Type ....................................... JPEG
Data Type (Movies)
Recording Format ............................. MP4
Video .................................................MPEG-4 AVC/H.264
Audio.................................................MPEG-4 AAC-LC
(Monaural)
Power Supply
Battery Pack .....................................NB-11LH
Interface
Wired ................................................ Hi-Speed USB (Mini-B)
Analog Audio Output
(Monaural)
Analog Video Output
(NTSC/PAL)
Wireless ............................................ Wi-Fi
Specications: IEEE
802.11b/g/n
Frequency: 2.4 GHz
Channels: 1 – 11
Security: WEP, WPA-PSK
(AES/TKIP), WPA2-PSK
(AES/TKIP)
NFC
Operating Environment
Temperature......................................0 – 40 °C (32 – 104 °F)
332
ç Contents
Dimensions (CIPA compliant)
(WxHxD) ............................................... 104.4 x 69.1 x 85.1 mm
(4.11 x 2.72 x 3.35 in.)
Weight (CIPA compliant)
Including Battery Pack,
Memory Card .................................... Approx. 325 g (approx.
11.5 oz.)
Camera Body Only ........................... Approx. 308 g (approx.
10.9 oz.)
333
ç Contents
Number of Shots/Recording Time, Playback Time
Number of Still Image Shots (CIPA
compliant)
Approx. 195 shots
Number of Still Image Shots (Eco Mode
On)
Approx. 260 shots
Movie Recording Time (CIPA compliant)*
1
Approx. 50 min.
Movie Recording Time (Continuous
Shooting)*
2
Approx. 1 hr. 30 min.
Playback Time*
3
Approx. 5 hr.
*1 Total time when shooting repeatedly with the following conditions
- [
] mode and defaults for other settings
- Shooting/pausing, zooming, turning the camera on and off
*2 Total time when shooting repeatedly with the following conditions
- [
] mode and defaults for other settings
- If the maximum amount of movie recording time or number of shots is
reached, the camera will shut down / restart.
*3 Time when playing a still image slideshow.
Shooting Range
Shooting
Mode
Focus
Range
Maximum Wide
Angle ( )
Maximum
Telephoto ( )
–
0 cm (0 in.) –
innity
1.4 m (4.6 ft.) –
innity
Other
modes
5 cm (2.0 in.) –
innity
1.4 m (4.6 ft.) –
innity
0 – 50 cm
(0 in. – 1.6 ft.)
–
3.0 m (9.8 ft.) –
innity
3.0 m (9.8 ft.) –
innity
334
ç Contents
Number of Shots per Memory Card
The number of shots at an aspect ratio (
=
83) of 4:3 per
memory card is as follows. Note that the number of shots available
varies by aspect ratio.
Number of Shots per 16 GB Memory Card (Approx. shots)
1792
3017
3546
5925
9344
16755
53992
80988
● The values in the table are based on Canon measurement
conditions and may change depending on the subject, memory
card and camera settings.
335
ç Contents
Recording Time per Memory Card
Recording Pixels
Total Recording Time
per 16 GB Memory
Card (Approx.)
Recording Time for
One Time (Approx.)
(1280 x 720)
2 hr 35 min. 37 sec. 29 min. 59 sec.
(640 x 480)
8 hr 25 min. 48 sec. 1 hr
● The values in the table are based on Canon measurement
conditions and may change depending on the subject, memory
card and camera settings.
● Recording times for individual movies are based on memory
cards rated at an SD speed class of 10. Recording may stop
when cards rated at lower speed classes are used. Recording
will also stop automatically when the le size reaches 4 GB, or
when the card becomes full.
336
ç Contents
Battery Pack NB-11LH
Type: Rechargeable lithium-ion battery
Nominal Voltage: 3.6 V DC
Nominal Capacity: 800 mAh
Charging Cycles: Approx. 300 times
Operating Temperatures: 0 – 40 °C (32 – 104 °F)
Battery Charger CB-2LF/CB-2LFE
Rated Input: 100 – 240 V AC (50/60 Hz)
Rated Output: 4.2 V DC, 0.41 A
Charging Time: Approx. 2 hr. 20 min. (when using
NB-11LH)
Operating Temperatures: 5 – 40 °C (41 – 104 °F)
● The number of shots that can be taken is based on
measurement guidelines of the Camera & Imaging Products
Association (CIPA).
● Under some shooting conditions, the number of shots and
recording time may be less than mentioned above.
● Number of shots/time with a fully charged battery pack.
337
ç Contents
Index
A
Accessories 264
AE lock 111
AF frames 123
Aspect ratio 83
AUTO mode (shooting mode)
39, 62
AV cable 265, 267
B
Batteries
→
Date/time (date/time
battery)
Power saving 49
Battery charger 2, 264
Battery pack
Charging 27
Eco mode 251
Level 306
Power saving 49
Black and white images 117
C
Camera
Reset all 260
Camera access point mode 195
Camera connect 180
CameraWindow 269
CANON iMAGE GATEWAY 179,
209
Center (AF frame mode) 123
Clock 60
Color (white balance) 115
Compression ratio (image quality)
132
Connecting via an access point
200
Cropping 168, 277
Custom white balance 116
D
Date/time
Adding date stamps 80
Changing 35
Date/time battery 36
Settings 33
World clock 249
Defaults
→
Reset all
Digital tele-converter 122
Digital zoom 74
Display language 37
338
ç Contents
DPOF 283
E
Eco mode 251
Editing
Cropping 168
i-Contrast 171
My colors 170
Red-eye correction 173
Resizing images 166
Editing or erasing connection
information 239
Erase
→
Erasing
Erasing 157
Erasing all 157
Error messages 300
Exposure
Compensation 111
F
Face AiAF (AF frame mode) 124
Face self-timer (shooting mode)
105
Favorites 164
File numbering 257
Fireworks
→
Fireworks (shooting
mode)
Fireworks (shooting mode) 97
Fish-eye effect (shooting mode)
99
Flash
Deactivating ash 131
On 131
Slow synchro 131
Focusing
AF frames 123
AF-point zoom 87
Servo AF 127
Focus lock 124
Focus range
Innity 121
Macro 120
FUNC. menu
Basic operations 54
Table 313, 327
G
Grid lines 86
I
i-Contrast 114, 171
Image quality
→
Compression
ratio (image quality)
Images
Display period 91
Erasing 157
Playback
→
Viewing
339
ç Contents
Protecting 151
Image stabilization 133
Image sync 230
Indicator 59
Innity (focus range) 121
ISO speed 113
L
Lamp 89, 90
Live view control (shooting mode)
95
Long shutter (shooting mode)
107
Low light (shooting mode) 96
M
Macro (focus range) 120
Magnied display 145
Memory card 3
Recording time 335
Menu
Basic operations 56
Table 310
Metering method 112
Miniature effect (shooting mode)
100
Monochrome (shooting mode)
104
Movies
Editing 175
Image quality (resolution/
frame rate) 85
Recording time 335
My colors 117, 170
P
P (shooting mode) 110
Package contents 2
Photobook set-up 288
PictBridge 266, 273
Playback
→
Viewing
Portrait (shooting mode) 96
Poster effect (shooting mode) 98
Power 264
→
Battery charger
→
Battery pack
Power saving 49
Printing 273
Program AE 110
Protecting 151
R
Red-eye correction 173
Remote shooting 236
Reset all 260
Resizing images 166
340
ç Contents
Resolution (image size) 84
Rotating 161
S
Saving images to a computer
196, 270
Screen
Display language 37
Icons 305, 307
Menu
→
FUNC. menu, Menu
SD/SDHC/SDXC memory cards
→
Memory card
Searching 143
Self-timer 76
2-second self-timer 77
Customizing the self-timer
78
Face self-timer (shooting
mode) 105
Sending images 224
Sending images to a computer
196
Sending images to another
camera 221
Sending images to a printer 218
Sending images to a smartphone
180
Sending images to web services
215
Sepia tone images 117
Servo AF 127
Shooting
Shooting date/time
→
Date/
time
Shooting information 305
Slideshow 147
Smart shufe 149
Software
Installation 269
Saving images to a computer
196, 270
Sounds 247
Strap 2, 26
Super vivid (shooting mode) 98
T
Terminal 268, 274
Toy camera effect (shooting
mode) 103
Tracking AF 125
Traveling with the camera 249
Troubleshooting 292
TV display 267
V
Viewing 44
Image search 143
342
ç Contents
Wi-Fi (Wireless LAN) Precautions
● Countries and Regions Permitting WLAN Use
- Use of WLAN is restricted in some countries and regions,
and illegal use may be punishable under national or local
regulations. To avoid violating WLAN regulations, visit the
Canon website to check where use is allowed.
Note that Canon cannot be held liable for any problems
arising from use in other countries and regions.
● Doing any of the following may incur legal penalties:
- Altering or modifying the product
- Removing the certication labels from the product
● According to foreign exchange and foreign trade law
regulations, export permission (or service transaction
permission) from the Japanese government is necessary to
export strategic resources or services (including this product)
outside Japan.
● Because this product includes American encryption software, it
falls under U.S. Export Administration Regulations, and cannot
be exported to or brought into a country under U.S. trade
embargo.
● Be sure to make notes of the wireless LAN settings you use.
The wireless LAN settings saved to this product may change
or be erased due to incorrect operation of the product, the
effects of radio waves or static electricity, or accident or
malfunction. Be sure to make notes of wireless LAN settings as
a precaution. Please note that Canon accepts no responsibility
for direct or indirect damages or loss of earnings resulting from
a degradation or disappearance of content.
343
ç Contents
● When transferring this product to another person, disposing
of it, or sending it for repair, be sure to note the wireless LAN
settings and reset the product to its default settings (erase
settings) if necessary.
● Canon will not make compensation for damages resulting from
loss or theft of the product.
Canon accepts no responsibility for damages or loss resulting
from unauthorized access or use of target devices registered
on this product due to loss or theft of the product.
● Be sure to use the product as directed in this guide.
Be sure to use the wireless LAN function of this product
within the guidelines noted in this guide. Canon accepts no
responsibility for damages or loss if the function is used in
ways other than as described in this guide.
● Do not use the wireless LAN function of this product near
medical equipment or other electronic equipment.
Use of the wireless LAN function near medical equipment
or other electronic equipment may affect operation of those
devices.
Radio Wave Interference Precautions
● This product may receive interference from other devices that
emit radio waves. To avoid interference, be sure to use this
product as far away as possible from such devices, or avoid
using the devices at the same time as this product.
344
ç Contents
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security
precautions more stringent than when using a LAN cable are
required.
Keep the following points in mind when using Wi-Fi.
● Only use networks you are authorized to use
This product searches for Wi-Fi networks in the vicinity and
displays the results on the screen. Networks you are not
authorized to use (unknown networks) may also be displayed.
However, attempting to connect to or using such networks
could be regarded as unauthorized access. Be sure to use
only networks you are authorized to use, and do not attempt to
connect to other unknown networks.
If security settings have not been properly set, the following
problems may occur.
● Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi
transmissions and attempt to acquire the data you are sending.
● Unauthorized network access
Third parties with malicious intent may gain unauthorized
access to the network you are using to steal, modify, or
destroy information. Additionally, you could fall victim to other
types of unauthorized access such as impersonation (where
someone assumes an identity to gain access to unauthorized
information) or springboard attacks (where someone gains
unauthorized access to your network as a springboard to cover
their tracks when inltrating other systems).
345
ç Contents
To prevent these types of problems from occurring, be sure to
thoroughly secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding
of Wi-Fi security, and balance risk and convenience when
adjusting security settings.
The camera can print to PictBridge-compatible
printers via Wi-Fi. PictBridge technical
standards make it easy to connect digital
cameras, printers, and other devices directly.
Additionally, a new standard called DPS
over IP enables PictBridge connections in
network environments, and the camera is also
compatible with this standard.
346
ç Contents
Trademarks and Licensing
● Microsoft and Windows are trademarks or registered
trademarks of Microsoft Corporation in the United States and/
or other countries.
● Macintosh and Mac OS are trademarks of Apple Inc.,
registered in the U.S. and other countries.
● App Store, iPhone, and iPad are trademarks of Apple Inc.
● The SDXC logo is a trademark of SD-3C, LLC.
● Wi-Fi
®
, Wi-Fi Alliance
®
, WPA™, WPA2™ and Wi-Fi Protected
Setup™ are trademarks or registered trademarks of the Wi-Fi
Alliance.
● The N-Mark is a trademark or registered trademark of NFC
Forum, Inc. in the United States and in other countries.
● All other trademarks are the property of their respective
owners.
● This device incorporates exFAT technology licensed from
Microsoft.
● This product is licensed under AT&T patents for the MPEG-4
standard and may be used for encoding MPEG-4 compliant
video and/or decoding MPEG-4 compliant video that was
encoded only (1) for a personal and non-commercial purpose
or (2) by a video provider licensed under the AT&T patents
to provide MPEG-4 compliant video. No license is granted or
implied for any other use for MPEG-4 standard.
347
ç Contents
Disclaimer
● Unauthorized reproduction of this guide is prohibited.
● All measurements based on Canon testing standards.
● Information subject to change without notice, as are product
specications and appearance.
● Illustrations and screenshots in this guide may differ slightly
from the actual equipment.
● The above items notwithstanding, Canon cannot be held liable
for any loss arising from the use of this product.
