Loading ...
Loading ...
Loading ...
7
DISASSEMBLY
Disassembly is the reverse of installation. Make sure that the mains power has been cut off
to avoid risk of injury.
electriQ UK Support.
www.electriQ.co.uk/support
Please, for your own convenience, make these simple checks before calling the service line.
If the unit still fails to operate call: 0871 620 1057 or complete the online form
Office hours: 9AM - 5PM Monday to Friday
www.electriQ.co.uk
Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA
PRODUCT DISPOSAL
Do not dispose this product as unsorted municipal waste. Collection of
such waste must be handled separately as special treatment is
necessary.
Recycling facilities are now available for all customers at which you can
deposit your old electrical products. Customers will be able to take any
old electrical equipment to participating civic amenity sites run by their
local councils. Please remember that this equipment will be further
handled during the recycling process, so please be considerate when
depositing your equipment. Please contact the local council for details of
your local household waste recycling centres.
Remove the wired controller from the backing plate using a flat head
screwdriver in the gap between the backing plate and the controller. Once
the two parts are separated, the remainder can be unclipped.
Disconnect the signal wires from the
rear of the wired controller.
Pass the signal wire through the opening in the rear of
the backing plate, ensuring they are not damaged during
removal.
V20190702