Loading ...
Loading ...
Loading ...
Servicing Your Honda
134
Engine Oil & Filter
Install a New Engine Oil Filter:
7.
Remove the right side rubber dust cover.
8.
Remove the oil filter bolt and oil filter cover.
Let the remaining oil drain out.
9.
Remove the oil filter from the oil filter cover.
10.
Remove the spring and washer. Do not discard the washer with
the old oil filter.
11.
Remove the O-rings from the oil filter bolt and oil filter cover.
Apply a thin coat of engine oil to new O-rings and install them
into the grooves of the oil filter cover and oil filter bolt. Insert a
new oil filter to the oil filter cover.
Use only the Honda Genuine oil filter or a filter of equivalent
quality specified for your model. Using the wrong Honda filter or
a non-Honda filter which is not of equivalent quality may cause
engine damage.
12.
Install the oil filter cover and tighten the oil filter bolt. Make sure
the oil filter bolt is tightened securely to the specified torque.
Oil filter bolt torque:
13 lbf·ft (18 N·m, 1.8 kgf·m)
NOTICE
Improper installation of the oil filter can cause serious engine
damage.
18 SXS700M2M4-31HL36400.book 134 ページ ２０１７年５月２６日 金曜日 午後６時５０分
Loading ...
Loading ...
Loading ...