Loading ...
Loading ...
Loading ...
7.
Install the new oil filter with the OUT-SIDE
mark facing out.
8.
Install the oil filter spring into the oil filter
cover, and then install the new gasket and
oil filter cover by tightening the oil filter
cover bolts.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
9.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 18 lbf·ft (24 N·m, 2.4 kgf·m)
10.
Fill the crankcase with the recommended
oil (2 P. 43, 2 P. 128) and install the oil fill
cap.
Required oil
When changing oil & engine oil
filter:
1.6 US qt (1.5 L)
When changing oil only:
1.5 US qt (1.4 L)
11.
Check the oil level. 2 P. 62
12.
Check that there are no oil leaks.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
20170928092719_31K75B200_enu_BOOK Page 68 Thursday, September 28 2017 09:32:27 JST
Engine Oil u Changing Engine Oil & Filter
Maintenance
65
Continued
Loading ...
Loading ...
Loading ...