Loading ...
Loading ...
Loading ...
5.
Disconnect the spark plug cap from the
spark plug.
6.
Clean any dirt from around the spark plug
base.
7.
Remove the spark plug using a suitable
spark plug wrench.
8.
Install the new spark plug. With the plug
washer attached, thread the spark plug in
by hand to prevent cross-threading.
9.
Tighten the spark plug:
● Installing a new plug, tighten it twice
to prevent loosening:
a) First, tighten the plug:
1/2 turn after it seats.
b) Then loosen the plug.
c) Next, tighten the plug again:
1/8 turn after it seats.
NOTICE
An improperly tightened spark plug can damage
the engine. If a plug is too loose, a piston may be
damaged. If a plug is too tight, the threads may
be damaged.
10.
Reinstall the spark plug cap. Take care to
avoid pinching any cables or wires.
11.
Install the parts in the reverse order of
removal.
20170116172943_31K36A300_enu_BOOK Page 67 Monday, January 16 2017 17:32:27 JST
Spark Plug u Changing Spark Plug
Maintenance
64
Spark plug cap
Loading ...
Loading ...
Loading ...