Loading ...
Loading ...
Loading ...
4
3. Connecting your LabelWriter Printer
NOTE Do not connect the printer to your computer until after the
software installation is complete.
To connect the power
1 Plug the power cord into the power adapter. See Figure 3.
2 Plug the power adapter into the power connector on the bottom of
the printer. See Figure 4.
3 Plug the other end of the power cord into a power outlet.
4 Plug the USB cable into the USB port on the bottom of
the printer.
5 Insert the power and USB cables through the cable channel
and set the printer down.
6 When the software is completely installed, connect the
other end of the USB cable into an available USB port on
your computer.
Mac OS If the printer is not in the printer list when the installation is complete, refer to the
ReadMe file for instructions on how to add the printer.
Figure 3
Power adapter
Power cord
USB
24VDC
Figure 4
PowerUSB
Cable
channel
Loading ...
Loading ...
Loading ...