Loading ...
Loading ...
Loading ...
6
|
Wolf Customer Care 800.222.7820
Module Installation
Remove the module and components from the shipping
package and recycle packing materials.
1 Lower module into the opening. Center module with
the front parallel to the edge of the countertop. Using
a pencil, outline the rear edge of the module on the
countertop.
2 Remove module.
3 Apply the foam strip to the underside of the module
frame. Refer to the illustration below. Do not seal module
to the countertop.
FOAM STRIP
COUNTERTOP
BRACKET
CLIP
CLAMPING
SCREW
Module installation.
INSTALLATION
4 Insert module into the opening, aligning rear edge with
the pencil line. Verify module is aligned with the edge of
the countertop.
5 To attach brackets to the sides of the module, insert
clips into the side punchouts and press down. Install
clamping screws into the brackets and tighten until
screws contact the underside of the countertop. Do not
overtighten. Refer to the illustration below.
Loading ...
Loading ...
Loading ...