Loading ...
Loading ...
Loading ...
Version 08/10 - Page 5
upper
chimney
cover
lower
chimney
cover
canopy
cabinet base
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
3 3/8” min
15 3/8” max
23
5/8”
2"
36”
FIGURE 4
DUCTED
DIMENSIONS
x
min & max ceiling height examples
x = 30"
min
7'
11"
max
8'
11"
x = 28"
min
7'
9"
max
8'
9"
x = 26"
min
7'
7"
max
8'
7"
x = 24"
min
7'
5"
max
8'
5"
The Tratto Isola chimney is highly adjustable
and designed to meet varying ceiling heights
as indicated in FIGURE 4. The chimney can
be adjusted for ceilings between 7' 5" and
8' 11" depending on the distance between
the bottom of the hood and the cooktop
(distance x in FIGURE 4).
For higher ceiling installations, the High
Ceiling Chimney Kit includes an additional
support structure which adds 27 1/2" to the
ceiling heights in FIGURE 4.
DUCTED INSTALLATION DIMENSIONS
(vented to the outside)
PLAN THE INSTALLATION
This rangehood can be installed as either ducted or ductless. When installed ductless, the rangehood vents out of a grate on the
back of the lower chimney. Ductless installations require a Ductless Conversion Kit, available from your dealer.
WARNING! BEFORE MAKING ANY CUTS OR HOLES FOR INSTALLATION, DETERMINE WHICH VENTING METHOD WILL
BE USED AND CAREFULLY CALCULATE ALL MEASUREMENTS.
WARNING
DUE TO THE SIZE
AND WEIGHT OF THIS
RANGEHOOD, THE
SUPPORT MUST BE
FIRMLY ATTACHED TO
THE CEILING. For plaster
or sheet rock ceilings, the
support must be attached
to the joists. If this is not
possible, a support structure
must be built behind the
plaster or sheet rock. The
manufacturer assumes no
responsibility for injury or
damage caused by improper
installations.
!
27” -
NOTE: To reduce the chimney structure
to the 27" minimum height as shown, the
middle section of the support structure
(FIGURE 5) needs to be removed. Out of
the box, the minimum chimney length is
32", not 27" as shown in the dimensional
diagram. Add 5" to all minimum ceiling
height calculations if keeping the middle
section in place. Contact Faber at
508-358-5353 for more information.
FIGURE 5
Loading ...
Loading ...
Loading ...