Loading ...
Loading ...
Loading ...
Cleaning and care
36
Before proceeding with any
maintenance or cleaning task, the
cooker hood must be disconnected
from the power supply, see “Warning
and safety instructions”.
Housing
General information
The surfaces and controls are
susceptible to scratches and
abrasion.
Please observe the following
cleaning instructions.
All external surfaces and controls can
be cleaned using hot water with a
small amount of washing-up liquid
applied with a well wrung-out soft
sponge or cloth.
After cleaning, wipe the surfaces dry
using a soft cloth.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents. These will damage
the surface material.
Important for appliances with
lacquered housing
Please observe the general notes on
cleaning earlier in this section.
Minor scratches on the surface are
inevitable when cleaning the housing.
Depending on the lighting in the
kitchen, this may negatively affect the
appliance's appearance.
Important for appliances with glass
surfaces
Glass surfaces can be cleaned using
a proprietary non-abrasive cleaning
agent designed specifically for use on
glass.
Cleaning the drip tray
Condensate collects in the drip tray
underneath the grease filter. This tray
can be removed for cleaning.
Pull the drip tray forwards a little, and
then pull it downwards to remove it.
Pour any condensate that has
collected in it away and then clean
the tray with a damp cloth.
Loading ...
Loading ...
Loading ...