Loading ...
Loading ...
Loading ...
Servicing Your Honda
122
Engine Oil & Filter
Install a New Engine Oil Filter:
3.
Remove the oil filter bolt (2) and oil filter cover (3).
Let the remaining oil drain out.
4.
Remove the oil filter (4) from the cover.
5.
Remove the spring and washer. Do not discard the washer with
the old oil filter.
6.
Discard the oil filter.
7.
Coat new O-rings (5) with oil and install them into the grooves in
the oil filter cover and oil filter bolt. Then insert a new oil filter to
the oil filter cover.
Use only the Honda Genuine oil filter or a filter of equivalent
quality specified for your model. Using the wrong Honda filter or
a non-Honda filter which is not of equivalent quality may cause
engine damage.
8.
Install the oil filter cover and tighten the oil filter bolt. Make sure
the oil filter bolt is tightened securely to the specified torque.
Oil filter bolt torque:
13 lbf·ft (18 N·m , 1.8 kgf·m)
NOTICE
Improper installation of the oil filter can cause serious engine damage.
(5)
(4)
(2) oil filter bolt
(3) oil filter cover
(2)
(3)
(4) oil filter
(5) O-rings
19 TRX680FA-31HN8760.book Page 122 Friday, June 1, 2018 9:32 AM
Loading ...
Loading ...
Loading ...