Loading ...
Loading ...
Loading ...
Basic Operation & Riding
76
Starting & Stopping the Engine
The recoil starter is used to start the engine when the battery is low.
To operate the recoil starter:
1.
Turn the ignition switch to the ON (q) position.
2.
Check that the transmission is in neutral.
3.
Grasp the starter grip (1) firmly, then pull it out slowly
approximately 100 mm (4 in).
4.
Pull the grip up briskly and fully.
5.
After the engine starts, allow the starter grip to return slowly.
If the starter grip does not return smoothly (because of dirt in the
assembly), see your dealer.
Using the Recoil Starter
RIGHT SIDE
(1)
(1) starter grip
19 TRX420FA6 (U)-32HR7A400.book 76 ページ ２０１８年６月１４日 木曜日 午後４時１７分
Loading ...
Loading ...
Loading ...