Loading ...
1 1/2"
38 mm
6 1/32"
153 mm
29 31/32
761 mm
42 1/16"
1068 mm
17 29/32"
455 mm
6 1/4"
159 mm
2 31/32"
75 mm
23 9/16"
598 mm
23 13/16"
605 mm
36 3/32"
917 mm
1/4" dia. typ.
6 mm
1/4" hole
6 mm
3 Door Decorator Panel Installation
HOW TO INSTALL AND
REMOVE JENN-AIR
H
ANDLES
In some cases, handles may need
to be removed to transport unit
through tight spaces, reversing
doors, or installing panels. Some
models may come with handles
shipped separate from the
refrigerator door.
Tools Required
Phillips screw driver
3/32” Allen Wrench
1/4” Hex head screw driver
REMOVING HANDLES
1. Locate set screws in handle and loosen set screws with
a 3/32" Allen wrench.
2. Lift handle from handle mounting posts
to remove.
INSTALLING HANDLES
1. Retrieve handle from shipping material
(some models).
2. Locate handle mounting posts on face
of door.
3. Position handle over mounting posts.
4. Tighten set screws (A) with a 3/32"
Allen wrench
3
/4" (19mm)
Left Refrigerator Door Panel
(Showing optional routed
3
/
4
" panel)
1
/
4" (6mm)
Typical
1
/
4" (6mm)
Typical
Panel Installation
Tools required: Phillips screw driver
• Remove handle
• Remove top trim screws.
• Install panel and replace top
trim and screws.
• Replace Handle
NOTE: Inside door edges on three door
model are not trimmed. Installed wood panel
edges will be exposed and require finishing.
1 1/2” (3.8cm) long
1/4” hex head screw
(factory installed)
(Note customer to
provide 2” (5.1cm) long
screw for 3/4” panel.)
Freezer Door
Refrigerator Door
Weight requirements for raised panel inserts :
•
Individual refrigerator door panels should not exceed 15
lbs. (7 kg).
•
Freezer drawer panel should not exceed 15 lbs. (7 kg).
12884403 6/08