Loading ...
Loading ...
Loading ...
Operation
17
Turning on the blower
Pull out the fume deflector. For
optimum extraction with minimum
noise levels, always pull out the fume
deflector to its full extent.
The blower turns on at level 2. The
symbol and 2 will light up in the blower
level display.
Selecting the power level
Power levels 1 to 3 can be used for light
to heavy cooking vapors and odors.
For strong vapors and odors that are
temporarily produced when cooking,
e.g., during searing, select the B
booster level.
Press the "" button for a lower
power level or the "" button to
select a higher level.
Automatic Booster setting
switch-off
You have the option to program the
booster level to ensure the fan will
always switch back to level 3
automatically after 10 minutes.
To set this option, both the blower
and the overhead lighting must be
turned off and the fume deflector
pushed in.
Press theandbuttons at the
same time for approx. 10 seconds,
until 1 lights up.
Then, press the following buttons in
succession:
– the lighting button,
– followed by the button and then
– the lighting buttonagain.
If automatic switch-off is not activated,
the 1 and B displays will flash.
To activate it, press thebutton.
If 1 and B are lit, automatic switch-off is
activated.
To deactivate it, press thebutton.
Use the On/Off buttonto confirm
your choice of setting.
If you do not confirm within 4
minutes, the system will revert to the
old setting.
Loading ...
Loading ...
Loading ...