GE - General Electric WPSB8060BCC GE Profile Super Plus 3.2 Cu. Ft. Capacity Washer

User Manual - Page 10

For WPSB8060BCC.

PDF File Manual, 20 pages, Read Online | Download pdf file

WPSB8060BCC photo
Loading ...
Loading ...
Loading ...
Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips
Throughout this manual, features and appearance may vary from your model.
About controls features.
10
START
After you have selected a new cycle, press once to start the cycle.
Press twice to select the last cycle used and start the washer.
If the washer is running, press once to interrupt the cycle; press again to continue
the cycle.
STOP
This pad should
not
be used to interrupt or pause a cycle.
Pressing this pad will cancel the current settings and the settings will be lost.
Estimated Time Remaining
Displays the approximate time remaining until the end of the cycle.
If the estimated time remaining is more than 60 minutes, “1H” will flash in the display,
followed by the additional remaining minutes. When the time remaining is less than
60 minutes, the timer will count down.
Cycle time is affected by how long it takes the washer to fill. This depends on the water
pressure in your home. The “smart” timer “learns” the amount of time it takes to fill
your washer and adjusts the total time accordingly.
NOTE:
If
PRESOAK
is selected and a follow up wash cycle is not chosen, two dashes will
come up in the display.
E
ST.
T
IME
R
EMAINING
Spot Spray
Provides a short spray of water to allow you to dampen clothing when you pretreat stains.
Open the washer lid.
Press the
SPOT SPRAY
button. (You will see a short stream of water.)
Dampen your soiled garment with the
SPOT SPRAY
option and rub your favorite
pretreatment product into soiled area.
NOTE:
The
SPOT SPRAY
option will not work if
the washer lid is down
the washer tub is filling
the water has already reached the level you selected.
3
2
1
BLEACH SIGNAL
(on some models)
The Bleach Signal is a reminder signal that can be turned on to remind you to add bleach
at the proper time in the wash cycle. Adding detergent and bleach at the same time
reduces the effectiveness of both the enzymes in the detergent and the chlorine in the
bleach. By adding bleach later in the wash cycle, you allow the detergent’s enzymes to
remove dirt and stains first, and then provide a more effective dose of liquid bleach to
whiten and sanitize your clothes.
Loading ...
Loading ...
Loading ...