Loading ...
Loading ...
Loading ...
17
Problem
Possible cause
Solution
Temperature is
set too cold or
the appliance
runs at SUPER
modes,
Turn the
temperature
regulator to a
warmer setting
temporarily.
The food is not
frozen enough.
Temperature is
not properly
adjusted.
Please look in the
initial
Temperature
Setting section.
Door was open
for an extended
period.
Open the door
only as long as
necessary.
A large quantity
of warm food was
placed in the
appliance within
the last 24 hours.
Turn the
temperature
regulation to a
colder setting
temporarily.
The appliance is
near a heat
source.
Please look in the
installation
location section.
Heavy build up of
frost on the door
seal.
Door seal is not
air light.
Carefully warm
the leaking
sections of the
door seal with a
hair dryer (on a
cool setting) At
the same time
shape the
warmed door seal
by hand such
that it sits
correctly.
Unusual noises
Appliance is not
level.
Re-adjust the
feet.
The appliance is
touching the wall
or other objects.
Move the
appliance slightly.
A component,
e.g. a pipe on the
rear of the
appliance is
touching another
part of the
appliance or the
wall.
If necessary,
carefully bend
the component
out of the way
Side panels are
hot
It’s normal. Heat
exchange is in the
side panels.
Take gloves to
touch side panels
if need.
If the malfunction shows again, contact the Service
Center.
These data are necessary to help you quickly and
correctly. Write the necessary data here, refer to
the rating plate.
Loading ...
Loading ...
Loading ...