Loading ...
Loading ...
Loading ...
Installation Instructions
17
TRANSFER FREEZER DOOR HANDLE
TO THE RIGHT
Plastic handle:
Remove the screws
holding the handle to
the top and bottom of
the door.
Remove handle.
Move the plug button on
the right side of the door
to the handle screw hole
on the left side.
8
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT (CONT.)
Transfer the door plug
button to the opposite side.
Reinstalling the handle:
Attach the handle to the
right side of the door.
7
Plastic handle:
Line up the handle with the screw
holes in the top of the door and
tighten the screws.
Install the screw into the bottom of the
handle.
Reinstall the handle plug.
Handle
Plug
Button
Stainless steel handle
(on some models):
Attach the handle to
the fastener and
tighten with the
3/32” Allen wrench
(supplied).
Line up the handle
with the screw holes
in the top of the
door and tighten the
screws.
Stainless steel handle (on
some models):
Remove the two screws
holding the handle to the
bottom of the door.
Loosen the set screw
with the 3/32” Allen
wrench (supplied) and
remove the handle.
Remove the handle
fastener with the 3/16”
Allen wrench (supplied).
Transfer the fastener to
the right side and move the GE badge to the left side of
the freezer door. Remove the paper covering on the
adhesive backing prior to attaching the badge to the
door.
Reattach the handle on the opposite side using the holes
closest to the edge of the door.
Plastic handle:
Line up the handle with
the screw hole in the top
of the door and tighten
screw.
Install the two screws
into the bottom of the
handle.
Move the plug button on
the right side of the door
to the handle screw hole
on the left side.
1
2
3
Fastener
1
2
3
4
1
3
2
Plug
Button
1
2
Plug
Button
2
1
3
Loading ...
Loading ...
Loading ...