Loading ...
Loading ...
Loading ...
5
VII. OPERATION PANEL. 1. Real Time Setting: Press the SET button one time, hour blinking,
press the button to set hour, press the SET button one time,
minutes ash, press the button to set minutes.
2. The timing for the machine start on time setting: press the SET button
3 times, hour blinking, press the button to set hour, press the SET
button one time, minutes ash, press the button to set minutes
3. Set the machine power o time: Press the SET button 5 times, hour
blinking, press the button to set hour, press the SET button one time,
minutes ash, press the button to set minutes
4. The timer functions take on use: Press to set timer, set the cycle
timer function mode: time power on time power o time o
power on and o, power on default time is 8:00, power o default time
is 12:00.
VVIII. FAULTS AND TREATMENTS
Buttons and Icon
Functions
Making Ice, Standby,
Eliminating faults.
SELECT Button
Selecting Ice cube size
：
L, M, S three sizes.
▲ key
Power on or o time setting; power on and o
time setting; three states setting switch
SET key
Clock-time setting, power o time setting, power
on and o time setting switch
Icon
Ice dropping fault indication, trouble free -
ashing
Icon
Water absence fault indication, fault-free ashing
Icon
Large, medium, small size ice size instructions,
the default Medium.
Icon
Ice full instruction.
Icon
Real-time indicator icon
Icon
Power on time setting function indicator
Icon
Clock icon indicates real time(24 hour system),
set real time, regular time, in hours and minutes
respectively blinking, no time setting display
real-time, the default time display 12:00
Icon
Ice working status indicator, ashing while ice
making time, still while standby.
Faults
Reason
Treatment
WORK indicator is not
light
.
Power Source is not
switched on.
ICE FULL indicator is
light.
Malfunction indicator
light ashes
Ice making box reset
in bad condition
WATER absence
indicator ashes
Absence of water
1. Ice fullness.
2. Low-temperature
protection
(temperature is
lower than 41°F).
1. Check the power supply matches
2. Check the power cord is connected correctly
3. Internal components are damaged.
Maintenance in professional department.
1. Remove the full Ice cube.
2. Move the Ice maker to a warmer place, where
the ambient temperature is higher than
41°F
.
1. Check whether any foreign body stuck the ice
making box.
2. Internal components are damaged.
Maintenance in professional department.
1. Pour the storage room into clean water, push
the key to eliminate the failure.
2. Water supply system or components damaged,
send to professional service department to
maintenance
6
www.NutrichefKitchen.comwww.NutrichefKitchen.com
Loading ...