Loading ...
Loading ...
Loading ...
Error indicator(
appears on the display.
)
Make sure to contact service agent approved by SHARP.
11
Before calling for service, check the following points.
Problem Solution / Situation
The outside of the cabinet is
hot when touched.
It is normal. This is because of the hot pipe is in the cabinet in order to prevent dew
generation
Refrigerator makes loud
noise.
Following sounds are normal.
• The compressor makes loud noise when its operation starts.
-- Sound becomes quieter after a while.
• The compressor makes loud noise once a day.
-- Operating sound is made immediately after automatic defrost operation of the cooling
unit.
•
time).
• Cracking or crunching sound, squeaking sound
-- It is caused by expansion and contraction of inner walls and internal parts during
cooling.
Frost or dew appears inside
or outside the refrigerator.
This may occur in one of the following cases. Use a wet cloth for wiping frost and a dry
cloth for wiping dew.
• When the ambient humidity is high.
• When the door is frequently opened and closed.
• When food containing plenty of moisture are stored. (Wrapping is required.)
The food in the refrigerator
compartment are frozen.
• Is the refrigerator temperature control set at 2°C for a long time?
-- Change the temperature control to 5°C or warmer.
• Is the freezer temperature control set at -22°C for a long time?
-- Change the temperature control to -18°C or warmer.
• If ambient temperature is low, food may freeze even if the refrigerator compartment is
set at 8°C.
Odors in the compartment. • Wrapping is required for the food with strong odors.
• Deodorizing unit cannot remove all odors.
Door alarm does not stop. • The alarm stops after close the door.
The control panel does not
work.
This may occur in one of the following cases.
•
•
•
•
•
Operate time is not enough for the keys to work.
Before you call for service
The panel or your finger is soiled with dripping, oil and etc.
When you touch the panel with gloved hand, adhesive bandage on your finger, nail or
objects.
Sticker or tape is affixed on the keys.
Touch position is slightly off from the keys.
It is caused by refrigerant flowing in pipes (sound may become louder from time to
Sound of flowing fluid (gurgling sound, fizzing sound).
If you encounter problems with this product, or if it fails to perform
to your expectations, make sure to contact our After Sales Support
Centre on (AU) 1300 886 649
Customer Helpline: (AU) 1300 886 649
Email: [email protected]
For an electronic copy of this manual, please contact our after sales support centre.
• Control panel is locked automatically 25 seconds after the last key operation.
Press button for 3 seconds or more to unlock.
Loading ...
Loading ...
Loading ...