Loading ...
Loading ...
Loading ...
18
2 Preparation
T Set the selector switch for the professional fine foam frother
to the Milk position (selector switch in horizontal position,
see image).
E If you wish to prepare milk foam, set the selector switch to the
Milk Foam position (selector switch in vertical position).
T Press the ‘Milk foam’ button.
The milk is prepared. The preset amount of milk flows into
the cup.
Preparation stops automatically. Your E8 is once more ready
for use.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
You can choose to use a second coffee variety, for example
decaffeinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee, ‘Not enough ground coffee’ is displayed and
the E8 stops the operation.
E The desired specialty coffee must be prepared within
approximately one minute after filling with the ground coffee.
Otherwise the E8 stops the operation and is once more ready
for use.
All specialty coffees with ground coffee are always prepared
following the same model.
Example:Proceed as follows to prepare one espresso using ground
coffee.
Precondition:The start screen (‘1/3’) is displayed.
T Place an espresso cup under the coffee spout.
Ground coffee
Loading ...
Loading ...
Loading ...