1. Home
  2. Waterdrop
  3. Waterdrop WD-MSWF User Manual

User Manual Waterdrop WD-MSWF Refrigerator Water Filter Replacement

Documents for Waterdrop WD-MSWF

The following documents are available:
Installation Instruction Photos
WD-MSWF photo

INSTALLATION INSTRUCTIONS

For WD-MSWF.

A REPLACEMENT FOR THE FOLLOWING WATER FILTER:
INSTALLATION INSTRUCTIONS
REFRIGERATOR WATER FILTER
022B6
NOTE: Empty the water hose by taking remaining water out from your water
dispenser until there is no more water coming out before installing the new
filter to release water pressure.
Loading ...
Summary of Contents for Waterdrop WD-MSWF:

Specifications

Waterdrop WD-MSWF Questions and Answers

#1 If I do not change my filter every 6 months, can this damage the system?

Yes. You must replace the filter every 6 months or sooner if water flow is reduced or if there is heavy sediment/rust sediment. Filters left in longer will fatigue, degrading the filter performance.

#2 Why is it difficult to twist the new filter into the filter housing?

Pressure inside may cause the expansion of connector, increasing the installation difficulty. Therefore, it is recommended you push the new filter in with a little bit of force, but not too hard. Then turn it clockwise.

#3 Do I need to flush the filter before using?

Yes. It is highly recommended you flush the filter before using. Water filters are made from advanced coconut carbon block, so there are some carbon fines in the filter. You need to flush firstly to remove those carbon fines to get clean water.
See other models: WD-PT-03 WD-LT500P WD-DA29-00003G WDP-DA29-00003G-3 WDP-DA29-00003G

Related Products