Loading ...
Loading ...
Loading ...
15
14
4. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the FRESH BREW
™
TIMER feature. To turn the coffeemaker off, press
the SELECT button until all lights turn off.
5. Make sure the decanter is empty before starting
to brew coffee.
6. Be sure to turn your coffeemaker off when
no longer using it.
The Fresh Brew
™
Timer Feature
The FRESH BREW TIMER feature displays the time
since the coffee brewing cycle started. At the start
of the brew cycle, the FRESH BREW TIMER feature
will automatically be activated.
Pressing the FRESH BREW TIMER button (Figure 8)
will allow you to toggle between the time of day
and FRESH BREW TIMER. While on the clock mode,
the FRESH BREW TIMER feature will keep counting.
NOTE: The BREW NOW green light must be on for
the FRESH BREW TIMER feature to operate. The time
and delay brew time cannot be set when the fresh
brew time is displayed.
BREWING COFFEE LATER
1. You must first set the time for when you would
like the coffeemaker to begin brewing your
coffee as described in Setting the Clock and
the Delay Brew Timer section.
2. Prepare your coffeemaker as described in
Adding Water and Ground Coffee section.
3. To activate DELAY BREW and program your
coffeemaker to brew coffee at a later time, press
the SELECT button twice (Figure 9). The yellow
DELAY BREW light will turn on. The coffeemaker is
now set to automatically brew coffee at the
pre-set later time. At this time the brew strength
light will turn on. You can select the strength that
you desire by pressing the BREW STRENGTH button.
4. At the pre-set time, the green BREW NOW light
will turn on and the DELAY BREW yellow light will
turn off, indicating the brewing has started in the
selected brew strength. The FRESH BREW
™
TIMER
feature will start.
5. The coffeemaker warmer plate will keep your
coffee hot for 2 hours and then automatically
turn off. Thermal models will turn off at the
end of the brew cycle.
As a safety feature, your coffeemaker will NOT
start again automatically the next day. If you
want your coffee to brew at the same time the
following day, simply add a new filter, coffee
and water and set DELAY BREW, by repeating
Steps 2 and 3 above.
To cancel DELAY BREW:
Press the SELECT button until all lights turn off
(Figure 9).
F
IGURE
8
F
IGURE
9
15-008-707 FT.qxd:Layout 2 3/13/08 5:20 PM Page 14
Loading ...
Loading ...
Loading ...