Loading ...
Loading ...
Loading ...
6
ELECTRONIC OVEN CONTROL
Display(s)
When power is first supplied to the appliance, everything on the
display(s) will light up for 5 seconds. Then, “PF id = 27” or
“PF id = 30” will appear. Press LOWER OVEN CANCEL to clear
display(s).
Any other time “PF id = 27” or “PF id = 30” appears, a power
failure occurred. Press LOWER OVEN CANCEL and reset the
clock if needed.
Lower Oven Display (combination oven models)
When the lower oven is in use, this display shows the lower oven
temperature, heat source(s) and start time.
During lower oven Timed Cooking, this display also shows a
vertical bar and minute time countdown and the stop time (if
entered).
If “Err” appears on the display, an invalid pad was pressed.
Press LOWER OVEN CANCEL and retry your entry.
When the lower oven is not in use, this display is blank.
Upper Oven Display (combination oven models),
Display (single oven models)
When the upper oven or single oven is in use, this display shows
the upper oven or single oven heat source(s), cooking power,
quantities, weights and/or help prompts.
If “RETRY” flashes on the display for one second, an invalid pad
was pressed. Retry your entry.
When the upper oven or single oven is not in use, this display
shows the time of day or Timer countdown.
Start
The START pad begins any lower oven function except the Timer.
If not pressed within 5 seconds after pressing a pad, “START?”
will appear on the lower oven display as a reminder. If not
pressed within 4 minutes after pressing a pad, the oven display
will return to inactive mode (blank) and the programmed function
will be canceled.
Lower Oven Cancel
The LOWER OVEN CANCEL pad stops any lower oven function
except for the Clock, Timer and Control Lock.
The cooling fan may continue to operate even after LOWER
OVEN CANCEL is pressed depending on the oven temperature.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the ovens, Timer and Timed Cooking
are off.
1. Touch CLOCK SET • START.
2. Touch the number pads to set the time of day.
3. Touch CLOCK SET • START, START or EASY MINUTE START.
To remove the time of day from the display: Touch and hold
CLOCK SET • START for 5 seconds.
To return the time of day to the display: Touch CLOCK
SET • START. The time should not have to be reset.
1. Lower Oven Display
2. Lower Oven Start and Cancel
3. Number Pads
4. Control Lock
5. Upper Oven Display, Time of Day/
Timer Display
6. Timer
7. Clock
8. Lower Oven Setting Selectors
9. EasyConvect™ Conversion
10. Timed Cooking
11. Convect Full Meal
12. Lower Oven Light
13. Upper Oven Control
(see separate Use and Care Guide)
CONVERSION
UPPER OVEN
1
2
3 5 6 7
13
12
1198
10
4
Loading ...
Loading ...
Loading ...