Loading ...
Loading ...
Loading ...
24
ow to use washer
H
1. Special function display
2. Self diagnose display
3. Completion of washing
4. Time left
• If the washer encounters a fault during
operation, the associated fault will be
displayed.
“ ” : Water pressure sensing error
“ ” : Problem of overfilling water
“ ” : Door is not closed
“ ” : Over load in motor
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Water temperature trouble
“ ” : Dry heater or thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page31 and
follow the guide.
• When Child lock is selected, the
“ ” lamp is on.
• After the end of dry, “ ” is displayed.
• When time delay is selected, it shows
the remaining time before the finish of
the selected program.
• When washing cycle is completed,
“ ” is displayed on the “Multi
display”.
• During washing cycle, the remaining
washing time is displayed.
• Recommended program by
manufacturer.
- Refresh : around 20 minutes
- Baby Care :
around 3 hours and 14 minutes
- Allergy Care :
around 2 hours and 27 minutes
- Cotton : around 2 hours and 17 minutes
- Synthetic :
around 1 hour and 34 minutes
- Cotton Quick :
around 1 hour and 15 minutes
- Duvet : around 1 hour and 38 minutes
- Hand Wash/Wool :
around 1 hour and 06 minutes
- Quick30 : around 30 minutes
• The washing time may vary by the
amount of laundry, water pressure,
water temperature and other washing
conditions.
• If an unbalanced load is detected or if
the suds removing program operates,
the wash time may be extended.
(Max. increasing time is 45 minutes.)
Display
Loading ...
Loading ...
Loading ...