Loading ...
Loading ...
Loading ...
STEP 1:
Make sure the area on the floor is clear.
Hold the position A of Main Frame (No.
01), then pull the Three-In-One Bolt (No.
13) to release the Running Board (No.
19). Slowly lower the Running Board
(No. 19) to the floor.
STEP 2:
Assemble Tablet Bracket (No. 45) with
2 Washers (No. 42) and 2 Screws (No.
46).
Tighten and secure using Allen Wrench
(No. 47).
Note: The treadmill must be lubricated
before first use. See page 8 for
lubrication instructions.
The assembly is complete!
Assembly Instructions
Loading ...
Loading ...
Loading ...