BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT – Save these instruc-
tions for local inspector’s use.
IMPORTANT – Observe all governing
codes and ordinances.
Note to Installer – Be sure to leave these
instructions with the Consumer.
Note to Consumer – Keep these instructions
with your Owner’s Manual for future
reference.
Installation
Instructions
DOOR AND ACCESS PANEL
COLOR CHANGE KIT
GPF310 and GPF410 Series Kits
GPF310A, GPF410A – Almond panels
GPF310B, GPF410B – Black panels
GPF310C, GPF410C – Bisque panels
GPF310W, GPF410W – White panels
GPF410S – Stainless Steel
WARNING:
To prevent electric shock, disconnect electri-
cal power supply to dishwasher before
changing panels. Do not operate dishwasher
while changing panels or when lower access
panel assembly is removed.
TOOLS AND MATERIALS
REQUIRED:
• 1/4" socket driver
• Phillips screwdriver
• Safety Glasses
• Gloves to protect against sharp edges
The GPF310 and GPF410 series trim kit is
designed to provide a color change or to
conceal minor damage to original dishwasher
door and access panels.
The new door panel cover provided in this kit
is designed to completely cover the existing
dishwasher door. Do not remove the original
door panel. 2 screws are provided for easy
installation.
This kit also provides a replacement access
panel assembly. The original access panel
assembly should be removed, discarded and
replaced with this piece.
1 REMOVE LOWER ACCESS PANEL
ASSEMBLY
• Remove the two screws below the access
panel. Retain screws.
• Loosen the two screws located between the
door and the access panel.
• Remove the access panel assembly from the
dishwasher and discard.
• Remove the toekick and set aside.
Note: Do not remove the insulation behind the
toekick.
STOP
Loosen 2 Screws
Escutcheon
Door
Panel
Access Panel
Toekick
Loosen 2 Screws
Escutcheon
Door
Panel
Access Panel
Toekick
Loading ...
Loading ...
Loading ...
