Loading ...
Loading ...
Loading ...
Page 6 of 21
OPERATION
Your heater may be operated by using the manual controls located on the control panel, by your remote
control, or by the smart app.
POWER SWITCH ON THE BACK OF THE UNIT
Used to turn the bladeless heater ON and OFF. This should be used to turn off the appliance before
leaving unattended.
CONTROL PANEL AND SETTINGS
ON/OFF BUTTON
Used to turn the bladeless heater ON and OFF. Please note when turning off the unit will not turn off
immediately and the fan will run for a short time to cool internal components.
SWING BUTTON
Press to turn the Swing function on and off. When it is operational the horizontal direction of the airflow
is slowly moved from side to side and the Swing indicator will be illuminated
MODE BUTTON
Press to cycle through the three available modes: Fan, Low Heating and High Heating. In heating the
default desired room temperature is set to 25⁰C and the unit will change to fan mode when this has been
reached. The desired temperature can be adjusted through the smart app.
TIMER BUTTON
Press repeatedly to increase the running time in 30 minute intervals. The timer can be set between 30
minutes and 7.5 hours. Addition of the lights will show the time set. I.e. if the 4h and 1h lights are lit, the
timer is set to 5 hours.
COLOUR BUTTON
Press to cycle through the options for the ambient light – Off, White, Green, Purple or Blue. The light
can be operated independently to the fan.
AMBIENT LIGHT INDICATOR
The indicator will be illuminated to indicate that the ambient light is turned on. The LED is also used for
the WIFI status, and will flash to indicate the heater is ready to connect to the internet.
Loading ...
Loading ...
Loading ...