Register your product and get support at
www.philips.com/welcome
19PFL3404H/12
22PFL3404H/12
26PFL3404H/12
32PFL3404H/12
42PFL3604H/12
19PFL3404D/12
22PFL3404D/12
26PFL3404D/12
32PFL3404D/12
42PFL3604D/12
19PFL3404D/05
22PFL3404D/05
26PFL3404D/05
EN User Manual
Österreich 0810 000205 €0.07 pro Minute
België/Belgique 078250145 €0.06 Per minuut/Par minute
България +3592 489 99 96 Местен разговор
Hrvatska 01 6403 776 Lokalni poziv
Česká republika 800142840 Bezplatný hovor
Danmark 3525 8759 Lokalt opkald
Estonia 6008600 local
Suomi 09 2311 3415 paikallispuhelu
France 0821 611655 €0.09 Par minute
Deutschland 01803 386 852 €0.09 pro Minute
Ελλάδα 0 0800 3122 1280 Κλήση χωρίς χρέωση
Magyarország 0680018189 Ingyenes hívás
Ireland North 0800 055 6882
South 1800-PHILIPS 7445477
free
Italia 840320086 €0.08 Al minuto
Қазақстан +7 727 250 66 17 local
Latvia 67228896 local
Lithuania 52737691 local
Luxemburg/Luxembourg 40 6661 5644 Ortsgespräch/Appel local
Nederland 0900 8407 €0.10 Per minuut
Norge 2270 8111 Lokalsamtale
Polska (022) 3491504 połączenie lokalne
Portugal 800 780 903 Chamada local
România 031-810 71 25
0800-89 49 10
Apel local
Россия Moscow (495) 961-1111
Outside Moscow 8-800-200-0880
Местный звонок
Србија +381 114 440 841 Lokalni poziv
Slovensko 0800 004537 Bezplatný hovor
Slovenija 00386 12 80 95 00 lokalni klic
España 902 888 784 €0.10 Por minuto
Sverige 08 5792 9100 Lokalsamtal
Suisse/Schweiz/Svizzera 0844 800 544 Appel local/Ortsgespräch/Chiamata locale
Türkiye 0800 261 3302 Şehiriçi arama
United Kingdom General No: 0870 900 9070
General National Rate No:
0870 911 0036
local
Україна 8-800-500-69-70 Місцевий виклик
www.philips.com/support
Model
Serial
This information is correct at the time of press. For updated information, see www.philips.com/support.
1
7 Connect devices 27
Back connector for 19-22 inch TV 27
Back connector for 26 inch TV and larger
29
Side connector 30
Connect a computer 31
Use a Conditional Access Module 32
Use Philips EasyLink 32
Use a Kensington lock 33
8 Product information 34
Supported display resolutions 34
Multimedia 34
Tuner/Reception/Transmission 34
Remote control 34
Power 34
Supported TV mounts 34
9 Troubleshooting 35
General TV issues 35
TV channel issues 35
Picture issues 35
Sound issues 36
HDMI connection issues 36
Computer connection issues 36
Contact us 36
10 Index 37
Contents
1 Notice 2
2 Important 4
3 TV overview 6
Side controls and indicators 6
Remote control 6
4 Use your product 8
Switch your TV on/off or to standby 8
Switch channels 8
Watch connected devices 9
Adjust TV volume 9
Use teletext 9
5 Use more of your product 10
Access TV menus 10
Remove devices from the home menu 10
Change picture and sound settings 10
Use advanced teletext features 13
Create and use lists of favourite channels
14
Use the Electronic Programme Guide 15
Use timers 16
Use TV lock and parental ratings 16
Use subtitles 18
Use the TV clock 19
View photos and play music from a USB
storage device 19
Listen to digital radio channels 21
Update the TV software 21
Change TV preferences 22
Access decoder channel 22
Start a TV demo 22
Reset the TV to factory settings 23
6 Install channels 24
Automatically install channels 24
Manually install channels 25
Rename channels 26
Reorder channels 26
Test digital reception 26
English
EN
2
bright points of light (red, green or blue)
may appear constantly on the screen.
This is a structural property of the display
(within common industry standards) and
is not a malfunction.
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers which, like
any electronic apparatus, in general
have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles
is to take all necessary health and safety
measures for our products, to comply
with all
applicable legal requirements and
to stay well within the EMF standards
applicable at the time of producing the
products.
Philips is committed to develop, produce
and market products that cause no
adverse health effects. Philips confirms
that if its products are handled properly
for their intended use, they are safe
to use according to scientific evidence
available today.
Philips plays an active role in the
development of international EMF
1 Notice
2009 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for pu
rposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Warranty
Risk of injury, damage to TV or void of •
warranty! Never attempt to repair the TV
yourself.
Use the TV and accessories only as •
intended by the manufacturer.
The caution sign printed on the back of •
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
war
ranty.
Pixel characteristics
This LCD product has a high number of
colour pixels. Although it has effective
pixels of 99.999% or more, black dots or
EN
and safety standards, enabling Philips
to anticipate further developments in
standardisation for early integration in its
products.
Mains fuse (UK only)
This TV is fitted with an approved
moulded plug. Should it become
necessary to replace the mains fuse, this
must be replaced with a fuse of the same
value as indicated on the plug (example
10A).
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3
Manufactured under licence from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Note
Only applicable to TVs supporting MPEG4-HD •
standard
All other registered and unregistered
trademarks are the property of their respective
owners.
3 Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.
Copyright
VESA, FDMI and the VESA Mounting Compliant
logo are trademarks of the Video Electronics
Standards Association.
® Kensington and Micro Saver are registered
US trademarks of ACCO World Corporation
with issued registrations and pending
applications in other countries throughout the
world.
English
EN
4
Avoid force coming onto power •
plugs. Loose power plugs can cause
arcing or fire.
Risk of injury or damage to the TV!•
Two people are required to lift and •
carry a TV that weighs more than
25 kg.
When stand mounting the TV, use •
only the supplied stand. Secure the
stand to the TV tightly. Place the
TV on a flat, level surface that can
support the combined weight of the
TV and the stand.
When wall mounting the TV, use •
only a wall mount that can support
the weight of the TV. Secure the wall
mount to a wall that can support the
combined weight of the TV and wall
mount. Koninklijke Philips Electronics
N.V. bears no responsibility for
improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!Follow these •
precautions to prevent the TV from
toppling over and causing injury to
children:
Never place the TV on a surface •
covered by a cloth or other material
that can be pulled away.
Ensure that no part of the TV hangs •
over the edge of the surface.
Never place the TV on tall furniture •
(such as a bookcase) without
anchoring both the furniture and TV
to the wall or a suitable support.
Educate children about the dangers •
of climbing on furniture to reach the
TV.
Risk of overheating! Never install the TV •
in a confined space. Always leave a space
of at least 4 inches or 10 cm around the
TV for ventilation. Ensure curtains or
other objects never cover the ventilation
slots on the TV.
Risk of damage to the TV! Before you •
connect the TV to the power outlet,
ensure that the power voltage matches
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!•
Never expose the TV to rain or •
water. Never place liquid containers,
such as vases, near the TV. If
liquids are spilt on or into the TV,
disconnect the TV from the power
outlet immediately. Contact Philips
Consumer Care to have the TV
checked before use.
Never place the TV, remote control •
or batteries near naked flames or
other heat sources, including direct
sunlight.
To prevent the spread of fire, keep
candles or other flames away from
the TV, remote control and batteries
at all times.
Never insert objects into the •
ventilation slots or other openings on
the TV.
When the TV is swivelled ensure •
that no strain is exerted on the
power cord. Strain on the power
cord can loosen connections and
cause arcing.
Risk of short circuit or fire!•
Never expose the remote control or •
batteries to rain, water or excessive
heat.
EN
5
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
the value printed on the back of the TV.
Never connect the TV to the power
outlet if the voltage is different.
Risk of injury, fire or power cord damage! •
Never place the TV or any objects on the
power cord.
To easily disconnect the TV power cord •
from the power outlet, ensure that you
have full access to the power cord at all
times.
When you disconnect the power cord, •
always pull the plug, never the cable.
Disconnect the TV from the power outlet •
and aerial before lightning storms. During
lightning storms, never touch any part of
the TV, power cord or aerial cable.
Risk of hearing damage! Avoid using •
earphones or headphones at high
volumes or for prolonged periods of time.
If the TV is transported in temperatures •
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Screen care
Avoid stationary images as much as •
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.•
Clean the TV and frame with a soft, •
damp cloth. Never use substances
such asalcohol, chemicals or household
cleaners on the TV.
Risk of damage to the TV screen! Never •
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading, •
wipe off water drops as soon as possible.
English
EN
6
Remote control
1
22
4
5
7
6
10
11
12
13
14
8
9
2
3
21
18
17
16
15
20
19
3 TV overview
This section gives you an overview of
commonly used TV controls and functions.
Side controls and indicators
a POWER: Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.
b P/CH +/-: Switches to the next or
previous channel.
c
SOURCE: Selects connected devices.
d VOLUME +/-: Increases or decreases
volume.
3
4
2
1
EN
7
o SOUND(Smart Sound)
Launches the sound menu.
p
+/- (Volume +/-)
Increases or decreases volume.
q
BACK P/P (Previous channel)
Returns to a previous screen.•
Returns to the previously viewed •
channel.
r
GUIDE
Switches between channel grid and
programme list.
s SUBTITLE (For RF Digital TV only)
Enables or disables subtitles.
t DEMO
Toggles the demonstration menu on or
off.
u
FORMAT
Selects a picture format.
v
INCR. SURR
Enables Incredible Surround for stereo
sources. Enables spatial mode for mono
sources.
a
(Standby-On)
Switches the TV to standby if it is on.•
Switches on the TV if it is in standby.•
b
MENU
Toggles the main menu on or off.
c MHEG/TELETEXT
Toggles teletext on or off.
d
SOURCE
Selects connected devices.
e Colour buttons
Selects tasks or options.
f AD (Audio Descriptor) (For RF Digital
TV only)
UK only: Enables audio commentary for
the visually handicapped.
g
OPTIONS
Accesses options relating to the current
activity or selection.
h OK
Confirms an entry or selection and
displays the channel grid, when watching
TV.
i
(Navigation buttons)
Navigates through the menus.
j
INFO
Displays program information, when
available. If the information spans multiple
pages, press OPTIONS to go to the next
page .
k
(Mute)
Mutes or restores audio output.
l P +/- (Programme +/-)
Switches to the next or previous channel.
When the TV menu is on, this functions
as Page Up/Down.
m 0-9 (Numeric buttons)
Selects a channel or setting.
n
PICTURE (Smart picture)
Launches the picture menu.
English
EN
8
Note
If you cannot locate your remote control and •
want to switch on the TV from standby, press
P/CH +/- or SOURCE at the side of the TV.
Switch channels
Press • P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the •
Numeric buttons.
Use the channel grid.•
Note
When you use a favourite list, you can only •
select those channels in the list.
4 Use your
product
This section helps you perform basic operations
(see ‘Use more of your product’ on page 10).
Switch your TV on/off or to
standby
To switch on
If the standby indicator is off, press •
POWER at the side of the TV.
If the standby indicator is red, press •
(Standby-On) on the remote control.
To switch to standby
Press •
(Standby-On) on the remote
control.
The standby indicator switches to red. »
To switch off
Press •
POWER at the side of the TV.
The standby indicator switches off. »
Tip
Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
EN
9
Press • to mute the sound.
Press •
again to restore the sound.
Use teletext
1 Press MHEG/TELETEXT.
The main index page appears. »
2 Select a page as follows:
Press the • Numeric buttons to enter
a page number
Press • P +/- or
to view the next
or previous page
Press the • Colour buttons to select a
colour coded item
Press •
BACK to return to a
previously viewed page
3 Press MHEG/TELETEXT to exit teletext.
Note
For UK users only: Some digital TV channels •
offer dedicated digital text services (for
example, BBC1).
• DEMO, SUBTITLE, AD and BACK
buttons on the remote control do not work
when you are watching a channel with MHEG
service. This limitation affects these models
only: 19PFL3404D/05,22PFL3404D/05 and
26PFL3404D/05.
Watch connected devices
Note
Switch on the device before selecting it as a •
source on the TV.
Use the source button
1 Press SOURCE.
The source list appears. »
2 Press the Navigation buttons to select a
device.
3 Press OK to confirm your choice.
The TV switches to the selected »
device.
Adjust TV volume
To increase or decrease volume
Press •
+/-.
Press • VOLUME +/- on the side of the TV.
To mute or unmute sound
English
EN
10
Remove devices from the
home menu
If a device is no longer connected to the TV,
remove it from the home menu.
1 Press MENU
2 Press to select a device to remove.
3 Press OPTIONS.
The » [Remove device] list appears.
4 Press OK and select [Remove] to remove
the device.
The selected device is removed from »
the home menu.
Change picture and sound
settings
Change picture and sound settings to suit your
preferences. You can apply pre-defined settings
or change settings manually.
Use settings assistant
Use the settings assistant to guide you through
the best picture and sound settings.
1 Press MENU.
2 Press to select [Setup] > [Picture]
> [Settings assistant].
3 Press OK.
The » [Settings assistant] menu appears.
Follow the on-screen instructions to
choose your preferred picture settings.
Use smart picture
Use smart picture to apply pre-defined
picture settings.
1 Press PICTURE.
The » [Smart picture] menu appears.
2 Press to select one of the following
smart picture settings.
5 Use more of
your product
Access TV menus
Menus help you to install channels, change
picture and sound settings and access other
features.
1 Press MENU.
The menu screen appears. »
2 Press the to select and navigate
through one of the following menus.
• [Watch TV]Switches back to the
aerial source if another source is
selected.
• [Setup]Accesses menus that allow
you to change picture, sound and
other TV settings.
• [Add new device]Adds new devices
to the home menu.
3 Press OK to confirm your choice.
4 Press MENU to exit.
Tip
After selecting • [Add new device], follow the
on-screen instructions to select the correct
device and connector.
Add new device
Watch TV
Setup
EN
11
• [Tint]Adjusts the colour balance in an
image.
• [Custom tint]Make a customised tint
setting. (Only available if [Tint] >
[Custom] is selected)
• [Digital Crystal Clear]Fine-tunes each
pixel to match surrounding pixels. This
produces a brilliant, high-definition image.
• [Dynamic contrast]Automatically
enhances contrast in an image. A
[Medium] setting is recommended.
• [Dynamic backlight]Adjusts the
brightness of the TV backlight to
match lighting conditions.
• [MPEG artifact reduction]Smoothes
out transitions on digital pictures.
You can switch this feature on or off.
• [Colour enhancement]Makes
colours more vivid and improves the
resolution of details in bright colours.
You can switch this feature on or off.
• [PC mode]Adjusts the picture when a PC
is connected to the TV via HDMI or DVI.
• [Picture format]Changes the picture
format.
• [Horizontal shift]Adjusts the picture
horizontally for PC-VGA, DVI, HDMI or
YPbPr.
• [Vertical shift]Adjusts the picture
vertically for PC-VGA, DVI, HDMI or
YPbPr.
Change picture format
1 Press FORMAT.
A picture format bar appears. »
2 Press or FORMAT to select a
picture format.
The selected picture format is »
activated.
3 Press OK to confirm your choice.
• [Personal]Lists customised personal
picture settings.
• [Vivid]Maximises picture settings.
• [Standard]Adjusts picture settings
to suit most environments and types
of video.
• [Movie]Applies picture settings
ideally suited for movie viewing.
• [Game]Applies picture settings
maximised for fast-moving games.
• [Energy saving]Applies low-energy
picture settings.
3 Press OK to confirm your choice.
The selected smart picture setting is »
applied.
Manually adjust picture settings
1 Press MENU.
2 Press to select [Setup] >
[Picture].
3 Press to select one of the
following picture settings.
• [Smart picture]Accesses pre-defined
smart picture settings.
• [Contrast]Adjusts the intensity of bright
areas, keeping dark areas unchanged.
• [Brightness]Adjusts the intensity and
details of dark areas.
• [Colour]Adjusts colour saturation.
• [Hue]Compensates colour variations in
NTSC encoded transmissions.
• [Sharpness]Adjusts the level of sharpness
in image details.
• [Noise reduction]Filters and reduces
noise in an image.
Picture
Sound
Features
Installation
Software update
Settings assist.
Smart picture
Contrast
Brightness
Colour
Hue
Sharpness
Noise reduction
Action
Personal
Off
English
EN
12
[Unscaled]For HD and PC
mode only, and in selected
models only. Allows
maximum sharpness.
Some distortion may
be present due to the
broadcaster’s systems.
Set your PC resolution to
wide screen mode for best
results.
Use smart sound
Use smart sound to apply pre-defined sound
settings.
1 Press SOUND.
The » [Smart sound] menu appears.
2 Press to select one of the following
smart sound settings.
• [Standard]Adjusts sound settings to
suit most environments and types of
audio.
• [News]Applies sound settings ideally
suited for spoken audio, such as the
news.
• [Movie]Applies sound settings ideally
suited for movies.
• [Personal]Applies the settings that
were customised in the sound menu.
3 Press OK to confirm your choice.
The selected smart sound setting is »
applied.
Adjust sound settings
1 Press MENU.
2 Press to select [Setup] > [Sound].
The » [Sound] menu appears.
Summary of picture formats
The following picture settings can be
configured.
Note
Depending on the format of the picture •
source, some picture settings are not available.
EN
[Auto format](Not for
PC mode.) Enlarges the
picture automatically to
best fit the screen. The
subtitles remain visible.
[Super zoom](Not for HD
and PC mode.) Removes
the black bars on the side
of 4:3 broadcasts. There is
minimal distortion.
[4:3]Shows the classic 4:3
format.
[Subtitle zoom]Displays
4:3 pictures over the full
area of the screen, with
sub-titles visible. Part of
the top of the picture is
clipped off.
[Movie expand 14:9](Not
for HD and PC mode.)
Scales 4:3 format to 14:9.
[Movie expand 16:9](Not
for HD and PC mode.)
Scales 4:3 format to 16:9.
[Wide screen]Stretches
the classic 4:3 format to
16:9.
13
• [Delta volume]Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change
the delta volume.
Use advanced teletext
features
Access the teletext options menu
Most of the advanced teletext features are
accessed via the teletext options menu.
1 Press MHEG/TELETEXT.
The teletext screen appears. »
2 Press OPTIONS.
The teletext options menu appears. »
3 Press to select one of the following
options.
• [Freeze page]Freezes the current
page.
• [Dual/Full screen]Enables and
disables dual screen teletext, which
splits the current channel or source
to the left of the screen, with
teletext on the right.
• [Reveal]Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
• [Cycle subpage]Cycles through
subpages automatically if subpages
are available.
• [Language]Switches to a different
language group to display a language
correctly when that language uses a
different character set.
4 Press OK to confirm your choice.
5 Press MHEG/TELETEXT to exit the
teletext options menu.
3 Press to select one of the
following sound settings.
• [Smart sound]Accesses pre-defined
smart sound settings.
• [Bass]Adjusts the bass level.
• [Treble]Adjusts the treble level.
• [Volume]Adjusts the volume.
• [Vol.vis.impaired]Sets the mix of
visually impaired audio with regular
audio. When available, visually
impaired audio includes audio
descriptions of on-screen action. You
can also enable this by pressing AD
(Audio Descriptor).
• [Balance]Adjusts the balance of the
right and left speakers to best suit
your listening position.
• [Audio language]Available for digital
channels, when multiple languages
are broadcast. Lists available audio
languages.
• [Dual I-II]Selects between audio
languages if dual sound is broadcast.
• [Mono/Stereo]Selects between
mono or stereo if stereo is
broadcast.
• [TV speakers]Turns TV speakers on
or off.
• [Surround]Enables spatial sound.
• [Auto volume]Automatically
reduces sudden volume changes, for
example, when switching channels.
When enabled, this produces a more
consistent audio volume.
Picture
Sound
Features
Installation
Software update
Standard
Smart sound
Bass
Treble
Volume
Vol.vis.impaired
Balance
Audio language
Dual I-II
English
Dual I
English
EN
14
3 Press to select [Show fav. ch.] and
press OK.
The favourite lists appear. »
4 Press to select a favourite list and
press OK.
Only channels in the favourite list »
appear in the channel grid.
Note
The favourite channel grid is empty until you •
add channels into the favourite lists.
View all channels
You can exit a favourite list, and view all
installed channels.
1 When watching TV, press OK to display
the channel grid.
2 Press OPTIONS.
The channel options menu appears. »
3 Press to select [Show fav. ch.] > [All].
4 Press OK.
All channels are displayed in the »
channel grid.
Note
All favourite channels will be marked by an •
asterisk when you view the channel grid.
Add a channel to a favourite list
Tip
View all channels before adding a channel to a •
favourite list.
1 When watching TV, press OK to display
the channel grid.
2 Press to select a channel you want
to add to a favourite list.
3 Press OPTIONS.
The channel options menu appears. »
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1 Press MHEG/TELETEXT .
The teletext screen appears. »
2 Press to select a teletext page.
3 Press to enter a subpage.
Select T.O.P. teletext broadcasts
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.
1 Press MHEG/TELETEXT.
The teletext screen appears. »
2 Press INFO.
The T.O.P. overview appears. »
3 Press to select a subject.
4 Press OK to view the page.
Create and use lists of
favourite channels
You can create lists of your preferred TV
channels and radio stations so that you can find
those channels easily.
Tip
You can create and store up to four favourite •
lists on your TV.
Select a favourite list
1 When watching TV, press OK to display
the channel grid.
2 Press OPTIONS.
The channel options menu appears. »
EN
15
Use the Electronic
Programme Guide
EPG is an on-screen guide available for digital
channels. EPG allows you to:
View a list of digital programmes being •
broadcast
View upcoming programmes•
Group programmes by genre•
Set reminders when programmes start•
Set up preferred EPG channels•
Switch on EPG
1 When watching TV, press GUIDE.
The EPG planner screen appears »
displaying information about the
scheduled programmes.
Note
EPG data is available only in selected countries •
and can take some time to load.
Tip
Press • GUIDE to switch between EPG and
channel grid.
Use EPG
1 When watching TV, press GUIDE.
The EPG planner screen appears. »
2 Press MENU.
The program guide menu appears. »
3 Press to select an option, and then
press OK to confirm it.
4 Press MENU to exit the EPG menu.
Note
Only the channels marked with [x] in the • [Pref.
EPG channel] list, appear in the EPG menu.
4 Press to select [Mark as favourite]
and press OK.
The favourite lists appear. »
5 Press to select a favourite list to add
the channel to.
6 Press OK.
The channel is added to the favourite »
list.
Tip
When watching TV, save the current channel •
in a favourite list by pressing OPTIONS >
[Mark as favourite].
Remove a channel from a favourite
list
Note
Select the favourite list to edit, before •
removing a channel.
1 When watching TV, press OK to display
the channel grid.
2 Press OPTIONS.
The channel options menu appears. »
3 Press to select [Show fav. ch.] and
press OK.
4 Press to select a favourite list and
press OK to edit.
The favourite channel grid appears. »
5 Press to select a channel that you
wish to remove from the list.
6 Press OPTIONS.
7 Press to select [Unmark as fav.] and
press OK.
The channel is removed from the »
favourite list.
English
EN
16
3 Press to set the sleep time.
The sleeptimer can be up to 180 »
minutes in steps of five minutes. If
set to zero minutes, the sleeptimer is
switched off.
4 Press OK to activate the sleeptimer.
The TV switches to standby after the »
pre-defined period of time.
Automatically switch the TV on (on
timer)
You can switch the TV to a specified channel
at a specified time, from standby or power-on
mode.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [On timer].
3 Press OK or to enter the [On timer]
menu.
• [Activate] Selects the frequency to
[Off] or [Once] or [Daily].
• [Time] Sets the starting time to
switch on the TV automatically.
• [Programme no.] Selects the
channel.
4 Press MENU to exit.
Tip
Select • [On timer] > [Activate] > [Off] to
disable [On timer].
Use TV lock and parental
ratings
You can prevent your children from watching
certain programmes or certain channels by
locking the TV controls and by using ratings.
Use the EPG options menu
Use the EPG options menu to set or clear
reminders, change day and access other useful
EPG options.
1 Press GUIDE.
2 Press OPTIONS.
The EPG menu appears. »
3 Press to select one of the following
options.
• [Set remind]/ [Clear remind]
• [Change day]
• [Show info]
• [Search by genre]
• [Schedule reminders]
• [Pref. EPG channel]
4 Press OK to enter or activate the option.
5 Press BACK to exit the EPG menu.
Tip
Press • GUIDE to switch between EPG and
channel grid.
Use timers
You can set timers to switch the TV on or
switch to standby at a specified time.
Automatically switch the TV to
standby (sleeptimer)
Sleeptimer switches the TV to standby after a
pre-defined period of time.
Tip
You can always switch off your TV earlier or •
reset the sleeptimer during the countdown.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Sleep timer].
The bar appears. »
EN
17
4 Press to select [Lock] or [Unlock].
5 Press OK to confirm.
All channels and connected devices are »
locked or unlocked.
Note
If you select • [Lock], you have to enter your
code every time you turn on your TV to access
all channels and connected devices.
Lock one or more channels
1 When watching TV, press OK to display
the channel grid.
2 Press to select a channel to lock.
3 Press OPTIONS.
The channel options menu appears. »
4 Press to select [Lock channel] and
press OK to enter.
A code setup screen prompts you to »
enter your current code (only at first
selection).
5 Enter your code and press OK.
6 Repeat the steps to lock more channels.
Note
Restart the TV for the change to take effect. •
Unlock one or more channels
1 When watching TV, press OK to display
the channel grid.
2 Press to select a locked channel to
unlock.
3 Press OPTIONS.
The channel options menu appears. »
4 Press to select [Unlock channel] and
press OK.
A code setup screen prompts you to »
enter your current code (only at first
selection).
Set or change code
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Set code].
3 Press OK or to enter the code setup.
4 Enter your code using the Numeric
buttons.
5 Re-enter the same code in the new
dialogue box for confirmation.
If the code is set successfully, the »
dialogue box will disappear. However, if
the code cannot be set, a new dialogue
box will prompt you to re-enter the
code.
6 If you want to change the code, select
[Setup] > [Features] > [Change code].
7 Enter your current code using the
Numeric buttons.
If the code is validated, a new dialogue »
box will prompt you to enter your
new code.
8 Enter the new code using the Numeric
buttons.
A message appears prompting you »
to enter the new code again for
confirmation.
Tip
If you forget your code, enter ‘8888’ to •
override any existing codes.
Lock or unlock the TV
Locking the TV prevents your child from
accessing all channels and connected devices.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [TV lock].
A screen appears prompting you to »
enter a code.
3 Enter your code using Numeric buttons.
The » [TV lock] menu appears.
English
EN
18
3 Enter the three-digit page number of the
subtitle page with the Numeric buttons.
4 Press MHEG/TELETEXT to switch off
teletext.
5 Press SUBTITLE.
The » [Subtitle mode] menu appears.
6 Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
7 Press OK to enable subtitles.
Note
Repeat this procedure to enable subtitles on •
each analogue channel.
Tip
Select • [Subtitle mode] > [Off] to disable
subtitles.
Enable subtitles on digital TV channels
1 When watching digital channels, press
SUBTITLE.
The » [Subtitle mode] menu appears.
2 Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
3 Press OK to enable subtitles.
Select a subtitle language on digital TV
channels
Note
When you select a subtitle language on •
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Subtitle language].
5 Enter your code and press OK.
6 Repeat the process to unlock more
channels.
Note
Restart the TV for the change to take effect. •
If you use • P +/- on your remote control to
switch between channels, the locked channels
are skipped.
If you access the locked channels from the
•
channel grid, a screen prompting you to enter
your current code appears.
Set parental ratings
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with age
ratings higher than your child’s age.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Parental rating].
A code setup screen appears. »
3 Enter your code using Numeric buttons.
The parental rating menu appears. »
4 Press to select an age rating.
5 Press OK to confirm.
6 Press MENU to exit.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-
T digital broadcasts. With digital broadcasts,
you have the additional option of selecting a
preferred subtitle language.
Enable subtitles on analogue TV
channels
1 Select an analogue TV channel.
2 Press MHEG/TELETEXT.
EN
19
Change the time zone
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Clock] > [Time zone].
3 Press to select your time zone.
4 Press OK to confirm.
Note
This option is only available if you select • [Auto
clock] > [Manual] (In countries with clock
transmission data).
Use daylight saving
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Clock] > [Daylight
saving].
3 Press OK or to enter [Daylight saving].
4 Press to select [Standard time] or
[Daylight saving time].
5 Press OK to enable your selection.
Note
This option is only available if you select • [Auto
clock] > [Manual].
View photos and play music
from a USB storage device
Caution
Philips is not responsible if the USB storage •
device is not supported nor is it responsible
for damage or loss of data from the device.
Your TV is fitted with a USB connector that
enables you to view photos or listen to music
stored on a USB storage device.
3 Press OK or to enter the list of
available languages.
4 Press to select a subtitle language.
5 Press OK to enable your selection.
Tip
You can also access • [Subtitle language] menu
while watching TV by pressing
OPTIONS >
[Subtitle language].
Use the TV clock
You can display a clock on the TV screen. The
clock displays the current time using time data
received from your TV service operator.
Display the TV clock
1 When watching TV, press OPTIONS.
The TV option menu appears. »
2 Select [Clock].
3 Press OK.
Note
To disable the clock, repeat the above •
procedure.
Change the clock mode
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Clock] > [Auto clock].
3 Press OK or to enter the [Auto clock]
menu.
4 Press to select [Automatic] or
[Manual].
5 Press OK to confirm.
English
EN
20
2 Press:
• OK to pause the slide show.
The »
icon appears.
Press •
to go back or move
forward to the next image.
•
BACK to stop the slide show.
Change slide show settings
1 When viewing a slide show, press
OPTIONS.
The slide show options menu appears. »
2 Press to select one of the following.
• [Start/Stop slide.]Starts or stops a
slide show.
• [Slideshow trans.]Sets the transition
from one picture to the next.
• [Slideshow freq.]Sets the amount of
time that a picture is shown.
• [Rotate image]Rotates a picture.
• [Show info]Displays the picture
name, date, size and next picture in
the slide show.
3 Press OK to confirm your setting.
Note
• [Rotate image] and [Show info] appear only
when you press OK or
to pause the
slideshow.
Listen to music
1 In the USB thumbnail browser view,
select [Music] and press
to enter.
2 Press GUIDE to switch between
thumbnail and file browsing views.
3 Press to select music or a music
album.
4 Press OK to play the selected music.
1 Turn on the TV.
2 Connect the USB device to the USB port
on the side of your TV.
The home menu appears. »
3 Press to select [Browse USB].
4 Press OK to confirm.
The USB thumbnail browser appears. »
Tip
Press • GUIDE to switch between thumbnail
and file browsing views.
View photos
1 In the USB thumbnail browser, select
[Picture] and press
to enter.
2 Press GUIDE to switch between
thumbnail and file browsing views.
3 Press to select a photo or a photo
album.
4 Press OK to view the selected photo in
full screen mode.
Tip
When in full screen mode, press • to move
between photos.
View a slide show of your photos
1 When a full screen image of a photo is
displayed, press OK.
A slide show begins from the selected »
image.
Add new device
Watch TV
Browse USB
Setup
EN
21
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1 Press MENU.
2 Press to select [Setup] >
[Software update] > [Current software].
The TV displays the current software »
information.
Update software (digital broadcasts)
You can update the TV software via a USB
device or OAD.
Update using a USB device
Connect your USB device to the USB port at
the side of your TV.
1 If the software update screen does not
appear automatically, select [Setup] >
[Software update] > [Local updates]
> [USB] to update the TV software
manually.
2 Follow the on-screen instructions to
complete the update.
Note
The TV restarts after the software update is •
complete.
Update using OAD (On the Air
software Download)
1 If using (DVB-T) digital broadcast, your
TV automatically receives software
updates. If you receive a message on
your screen asking you to update your
software:
Music settings
When listening to music, press OPTIONS
to access one of the following music settings.
• [Start/Stop play]
• [Repeat/Play once]
• [Shuffle on/off]
• [Show info]
• [TV speakers]
Disconnect a USB storage device
Caution
Follow this procedure to avoid damage to your •
USB storage device.
1 Press BACK to exit the USB browser.
2 Wait for five seconds before you
disconnect the USB storage device.
Listen to digital radio
channels
If digital broadcasting is available, digital radio
channels are installed automatically during
installation.
1 When watching TV, press OK to display
the channel grid.
2 Press OPTIONS.
3 Press to select [Filter channels] >
[Radio].
The radio channel grid appears. »
4 Press to select a radio channel and
press OK to listen.
Note
Select • [Filter channels] > [All] to exit radio
channels and view all channels.
English
EN
22
Access decoder channel
You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT1 (SCART).
Set decoder channel
Map channels from a decoder or descrambler
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Preferences] >
[Decoder].
3 Press OK or to enter [Decoder] menu
.
4 Press to select [Channel] and press
OK or
to enter.
A list of analogue channels appears on »
the screen.
5 Press to select one channel to map
to the decoder/descrambler channel and
press OK to confirm.
6 Select [Status] and press OK or to
enter.
7 Press to select [EXT 1] (SCART)
the connector used by the decoder/
descrambler.
8 Press OK.
9 Press MENU to exit.
Start a TV demo
1
Press DEMO on the remote control.
2 Press to select a demo and press OK
to view it.
3 Press DEMO to exit.
Select • [Update now] to update the
software immediately.
Select • [Remind me later] to exit the
update screen at that time and be
reminded later.
Select • [Cancel] to skip the update.
2 If you select [Cancel], you can manually
access the OAD update by selecting
[Setup] > [Software update] > [Local
updates] > [OAD].
3 Select the available version of OAD and
press OK.
4 Follow the on-screen instructions to start
the update.
Note
The TV restarts after the software update is •
complete.
Change TV preferences
1
Press MENU.
2 Press to select [Setup] >
[Installation] > [Preferences].
3 Press OK or to enter [Preferences].
• [Location]Optimises TV settings for
your location - home or shop.
• [Volume bar]Displays the volume
bar when adjusting the volume.
• [Channel info.]Displays information
about the TV channel every time you
switch channels. Select [Full] to view
channel information or [Off] to turn
off the channel information.
• [EasyLink]Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
• [E-sticker]For shop mode only. Sets
the location of the e-sticker.
EN
23
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. Channel installation settings
remain the same.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Factory settings].
3 Press OK or to enter the [Factory
settings] menu.
A factory setting message appears. »
4 Select [Reset] to start resetting.
5 Press MENU to exit.
English
EN
24
3 Press OK or to enter the menu.
The country menu appears. »
4 Press to select your country.
5 Press OK to confirm your choice.
The channel installation guide appears »
on the screen.
Step 3 Install channels
Install the available analogue and digital
TV channels and digital radio channels
automatically.
1 From the channel installation guide
screen (see ‘Step 2 Select your country’
on page 24), select [Full installation] to
automatically install all TV channels and
digital radio channels.
2 Press OK to confirm.
The TV starts to search and store all »
the available channels.
Language
Channel install.
Preferences
Decoder
Clock
Factory settings
Menu language
Channel assistant
Location
Channel
Auto clock
Action
Picture
Sound
Features
Installation
Software update
Select your country,
then press OK
Slovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
Ukraine
UK
Start automatic installation.
This takes a few minutes.
Full installation
Skip installation
6 Install channels
The first time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store
channels automatically.
Step 1 Select your menu language
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Language] > [Menu
language].
3 Press OK or to enter [Menu language].
4 Press to select a language setting.
5 Press OK to confirm.
6 Press to return to [Installation] menu.
Step 2 Select your country
Select your country for proper channel
installation.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Channel assistant].
Cl
Menu language
ock
Primary subtitle in
Picture
Sound
Features
Installation
Software update
Decoder
Language
Channel install.
Preferences
Decoder
Clock
Factory settings
Menu language
Primary audio language
Secondary audio language
- - - -
- - - -
- - - -
- - - -
Hearing impaired
Menu language
English
EN
25
3 Press OK or to enter [System] menu.
4 Press to select your country or
region.
5 Press OK to confirm.
6 Press to return to [Channel install.]
menu.
Step 2 Search and store new TV
channels
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
3 Press to select [Search] and then OK
or
to enter [Search].
4 Press to manually enter the three-
digit frequency.
5 Press OK to begin search.
If a channel is unavailable at the »
selected frequency, press OK to search
for the next available channel.
6 Press BACK when the new channel is
found.
7 Press to select [Store new channel]
to store the new channel under a new
channel number.
8 Press OK or to enter [Store new
channel] and press OK.
9 Press to return to the [Analogue:
Manual] menu.
Sound
Features
Preferences Start up message
Digital Test recept...
Picture
Sound
Features
Installation
Software update
Decoder
Language
Channel install.
Preferences
Decoder
Clock
Factory settings
Channel assistant
Standby update
Analogue: Manual
Analogue: Manual
System
3 When installation is complete, press OK
to return to [Installation] menu.
Step 4 Update the channel list
You can choose to enable auto update of
channels, if your TV is in standby mode. If you
enable this feature, the channels stored in your
TV will be updated every morning according
to the channel information in the broadcast.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Standby update].
3 Select [On] to enable the automatic
update or select [Off] to disable it.
Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system settings are •
correct.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
System searching. Please wait.
Stop
Digital channels found
Analogue channels found
7
0
English
EN
26
Reorder channels
After you install channels, you can rearrange the
order in which they appear.
1 When watching TV, press OK to display
the channel grid .
2 Press OPTIONS.
The channel options menu appears. »
3 Press to select [Reorder] and then
OK to return to the channel grid.
4 Press to select the channel you
want to reorder and press OK.
The selected channel is highlighted. »
5 Press to move the highlighted
channel to your preferred position.
6 Press OPTIONS.
» [Done reordering] appears on the
screen.
7 Press OK to finish reordering.
Test digital reception
If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Digital: test recept].
3 Press OK or to enter the menu.
4 Press to enter the frequency of
the channel you want to test.
5 Press OK to confirm the frequency and
then press OK again to confirm [Search].
6 When complete, select [Store] to store
the frequency.
Note
If the signal quality and strength is poor, •
reposition the antenna or satellite dish and
retest.
If you still have problems with the reception
•
of your digital broadcast, contact a specialised
installer.
Step 3 Fine-tune analogue channels
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
3 Press to select [Fine-tune] and then
OK or
to enter [Fine-tune].
4 Press to adjust frequency.
5 Press OK when done.
6 Press to select [Store current
channel] to store the fine-tuned channel
under the current channel number.
7 Press OK or to enter [Store curr.
chan.] and press OK.
8 Press to return to the [Channel install.]
menu.
Rename channels
Channels can be renamed so that a name of
your choice appears whenever the channel is
selected.
1 When watching TV, press OK to display
the channel grid .
2 Press to select the channel you
want to rename.
3 Press OPTIONS.
The channel options menu appears. »
4 Press to select [Rename channel].
A text input box appears. »
5 Press to select and change
characters.
6 Select [Done] to finish renaming
channels.
Tip
Use • [Aa] to change upper-case letter to lower-
case letter and vice versa.
EN
27
a PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
b EXT 2 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
VGA
VGA
PC IN(AUDIO)
7 Connect devices
This section describes how to connect
various devices with different connectors and
supplements examples provided in the Quick
Start.
Note
Different types of connectors may be used to •
connect a device to your TV, depending on
availability and your needs.
Back connector for 19-22
inch TV
7
8
English
EN
28
f SPDIF OUT
Digital audio output to home theatres
and other digital audio systems.
g HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray
players.
Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 31).
h SERV. U
For software update.
AUDIO
IN
SPDIF OUT
c EXT 1 (CVBS and RGB)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
d TV ANTENNA
Signal input from an antenna, cable or
satellite.
e AV OUT (VIDEO OUT and AUDIO
OUT L/R)
Audio and video output to analogue
devices such as another TV or a recording
device.
TV ANTENNA
EN
29
b EXT 3 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
c EXT 1 (RGB and CVBS)/EXT 2 (CVBS)
Analogue audio and video input from
analogue or digital devices such as
DVD players or game consoles. EXT 2
supports S-Video.
EXT1/ EXT2
(RGB/CVBS)/ (CVBS)
Back connector for 26 inch
TV and larger
a HDMI 1 (HDMI and AUDIO IN)
Digital audio and video input from high-
definition digital devices such as Blu-ray
players.
Audio input from devices that require
a separate audio connection, such as a
computer.
Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 31).
SPDIF
OUT
English
EN
30
a COMMON INTERFACE
Slot for a Conditional Access Module
(CAM).
b AUDIO L/R
Audio input from analogue devices
connected to VIDEO.
c VIDEO
Composite video input from analogue
devices such as VCRs.
d USB
Data input from USB storage devices.
d TV ANTENNA
Signal input from an antenna, cable or
satellite.
e SPDIF OUT
Digital audio output to home theatres
and other digital audio systems.
f SERV. U
For software update.
Side connector
TV ANTENNA
1
2
3
4
5
EN
31
• DVI-HDMI cable
• HDMI cable and HDMI-DVI adaptor
• VGA cable
DVI
LEFT / RIGHT
HDMI 1 / DVI
AUDIO IN :
PC IN(AUDIO)
For TV of size 26 inch and larger
For TV of size 19-22 inch
DVI
LEFT / RIGHT
HDMI 1 / DVI
AUDIO IN :
PC IN(AUDIO)
For TV of size 26 inch and larger
For TV of size 19-22 inch
VGA
VGA
PC IN(AUDIO)
For TV of size 19-22 inch only
e HDMI (Only for TVs 26 inches and
larger)
Digital audio and video input from high-
definition digital devices such as Blu-ray players.
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your •
computer to 60Hz.
Select a supported screen resolution on •
your computer.
Connect a computer with one of the
following connectors:
Note
Connections via DVI or VGA require an •
additional audio cable.
• HDMI cable
English
EN
32
Access CAM services
1 After inserting and activating the CAM,
press
MENU.
2 Press to select [Setup] >
[Features] > [Common interface].
Applications provided by the digital TV »
service operator appear on the screen.
Note
This menu option is available only if the CAM •
is inserted and activated correctly.
Use Philips EasyLink
Your TV supports Philips EasyLink, which
enables one-touch play and one-touch standby
between EasyLink-compliant devices.
Note
Compliant devices must be connected to your •
TV via HDMI.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not •
intend to use it.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Preferences] >
[EasyLink].
3 Select [On] or [Off].
Use one-touch play
1 After enabling EasyLink, press play on
your device.
The TV automatically switches to the »
correct source.
Use a Conditional Access
Module
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
Note
If required, refer to documentation from your •
operator on how to insert a smart card into
the Conditional Access Module.
Insert and activate a CAM
Caution
Be sure to follow the instructions described •
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
1 Switch off the TV.
2 Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of
the TV.
3 Push the CAM in as far as it will go.
4 Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM from
the slot when in use — removing the
CAM will deactivate digital services.
EN
33
Use one-touch standby
1 Press and hold Standby on the TV’s or
device’s remote control for at least three
seconds.
The TV and all connected HDMI »
devices switch to standby.
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
English
EN
34
Tuner/Reception/
Transmission
Aerial input: 75ohm coaxial (IEC75)•
DVB: DVB Terrestrial, DVB-T MPEG4 •
(only in some models)
TV system: DVB COFDM 2K/8K; PAL I, •
B/G, D/K; SECAM B/G, D/K, L/L’
Video playback: NTSC, SECAM, PAL•
Tuner Bands: Hyperband, S-channel, UHF, •
VHF
Remote control
Type: PF01E09B•
Batteries: 2 x AAA (LR03 type)•
Power
Mains power: 220-240V, 50Hz•
Standby power: < 0.3W•
Ambient temperature: 5 to 40 degrees •
Celsius
Supported TV mounts
To mount the TV, purchase a Philips TV mount
or a VESA-compatible TV mount. To prevent
damage to cables and connectors, be sure to
leave a clearance of at least 2.2 inches or 5.5cm
from the back of the TV.
Warning
Follow all instructions provided with the TV •
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
mounting that results in accident, injury or
damage.
TV screen
size (inches)
Required
pitch (mm)
Required
mounting bolts
19 100 x 100 4 x M4
22 100 x 100 4 x M4
26 100 x 200 6 x M4
32 200 x 200 4 x M6
42 400 x 400 4 x M6
8 Product
information
Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.
Supported display resolutions
Computer formats
Resolution - refresh rate:•
640 x 480 - 60Hz•
800 x 600 - 60Hz•
1024 x 768 - 60Hz•
1280 x 1024 - 60 Hz•
1360 x 768 - 60Hz•
1440 x 900 - 60Hz (For Full HD •
only)
1680 x 1050 - 50Hz, 60Hz (For Full •
HD only)
Via HDMI/DVI input•
Video formats
Resolution - refresh rate:•
480i - 60Hz•
480p - 60Hz•
576i - 50Hz•
576p - 50Hz•
720p - 50Hz, 60Hz•
1080i - 50Hz, 60Hz•
1080p - 24Hz, 25Hz, 30Hz, 50Hz, •
60Hz.
Multimedia
Supported storage device: USB (Only •
FAT or FAT 32 USB storage devices are
supported)
Supported multimedia file formats:•
Images: JPEG•
Audio: MP3•
Note
Multimedia file names must not exceed 128 •
characters.
EN
35
TV channel issues
Previously installed channels do not appear in
the channel list:
Check that the correct channel list is •
selected.
No digital channels were found during the
installation:
Check that the TV supports DVB-T or •
DVB-C in your country. See the listed
countries on the back of the TV.
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly •
connected to the TV.
Check that the correct device is selected •
as the TV source.
There is sound but no picture:
Check that the picture settings are •
correctly set.
There is poor TV reception from an antenna
connection:
Check that the antenna is properly •
connected to the TV.
Loudspeakers, unearthed audio devices, •
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor, •
fine tune this channel.
There is poor picture quality from connected
devices:
Check that the devices are connected •
properly.
Check that the picture settings are •
correctly set.
The TV did not save your picture settings:
Check that the TV location is set to the •
home setting. This mode offers you the
flexibility to change and save settings.
9 Troubleshooting
This section describes commonly encountered
issues and accompanying solutions.
General TV issues
The TV does not switch on:
Disconnect the power cable from the •
power outlet. Wait for one minute then
reconnect it.
Check that the power cable is securely •
connected.
The remote control is not working properly:
Check that the remote control batteries •
are correctly inserted according to the
+/- orientation.
Replace the remote control batteries if •
they are flat or weak.
Clean the remote control and TV sensor •
lens.
The standby light on the TV blinks red:
Disconnect the power cable from the •
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
You forgot the code to unlock the TV lock
feature
Enter ‘8888’. •
The TV menu is in the wrong language.
Change the TV menu to your preferred •
language.
When turning the TV on/off/to standby, you
hear a creaking sound from the TV chassis:
No action is required. The creaking sound •
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.
English
EN
36
If a HDMI-to-DVI adaptor or HDMI to •
DVI cable is used, check that an additional
audio cable is connected to AUDIO L/R
or AUDIO IN (mini-jack only).
Computer connection issues
The computer display on the TV is not stable:
Check that a supported resolution and •
refresh rate is selected on the computer.
Set the TV picture format to unscaled. •
Contact us
If you cannot resolve your problem, refer to
the FAQs for this product at www.philips.
com/support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in the Addendum.
Warning
Do not attempt to repair the product yourself. •
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Note
Make a note of your TV model and serial •
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
The picture does not fit the screen; it is too
big or too small:
Try using a different picture format. •
The picture position is incorrect:
Picture signals from some devices may •
not fit the screen correctly. Check the
signal output of the device.
Sound issues
There is a picture but sound quality is poor:
Note
If no audio signal is detected, the TV •
automatically switches the audio output off
— this does not indicate malfunction.
Check that all cables are properly •
connected.
Check that the volume is not set to 0. •
Check that the sound is not muted. •
There is a picture but the sound quality is
poor:
Check that the sound settings are •
correctly set.
There is a picture but sound comes from one
speaker only:
Verify that sound balance is set to the •
centre.
HDMI connection issues
There are problems with HDMI devices:
Note that HDCP support can delay the •
time taken for a TV to display content
from a HDMI device.
If the TV does not recognize the HDMI •
device and no picture is displayed, try
switching the source from one device to
another and back again.
If there are intermittent sound •
disruptions, check that output settings
from the HDMI device are correct.
EN
37
display
resolution 34
E
EasyLink
disable 32
enable 32
one-touch play 32
one-touch standby 33
environmental care 5
F
factory settings 23
favourite list
select 14
set up 14
H
HDMI cable
troubleshooting 36
I
install channels
automatic 24
manual 25
K
Kensington lock 33
L
location 22
lock
Kensington 33
M
menu
main menu 10
teletext 13
Multimedia
technical specifications 34
multimedia
listen to music 20
view photos 20
10 Index
B
batteries 34
bracket 34
C
Channel list
favourite 14
troubleshooting 35
update 14
channels
favourite list 14
install
automatic 24
manual 25
rename 26
test reception 26
child lock
ratings lock 18
clock 19
computer format
technical specifications 34
Conditional Access Module 32
connections
HDMI
troubleshooting 36
mains cord 27
technical specifications 34
troubleshooting 36
D
demo 22
devices
watch 9
digital channel
test reception 26
digital radio 21
digital services
CAM 32
teletext 13
English
EN
38
troubleshooting 35
TV
adjust volume 9
menu 10
screen care 5
software 21
standby 8
switch channels 8
switch off 8
switch on 8
troubleshooting 35
tuner technical specifications 34
wall mount 34
TV lock
lock channels 17
lock connected devices 17
V
Video format
video format technical specifications 34
volume
adjust 9
music
digital radio 21
USB 20
O
One-touch play 32
One-touch standby 33
P
picture format
picture format change 11
troubleshooting 35
Picture settings 10
R
ratings 18
reception 35
remote control
overview 6
technical specifications 34
S
settings assistant 10
sleep timer 16
Smart card 32
Smart settings 10, 12
software
version 21
sound settings 12
subtitles
language 18
on analogue channel 18
on digital channel 18
T
Table of Pages 14
technical specifcations 34
Teletext
features 13
subpages 14
table of pages 14
timer
on timer 16
standby 16
EN
39EN
40 EN
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
