Loading ...
Loading ...
Loading ...
7
Note: This drawing is 90% the size of all
other assembly drawings in this manual.
• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
• Assembly requires two persons.
• Because of its weight and size, assemble the
weight bench in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you nish all assembly steps.
• To identify small parts, see page 6.
• In addition to the included tool(s), assembly
requires the following tools:
one adjustable wrench
one Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1
2. Orient an Upright (1) as shown.
Attach a Stabilizer (13) to the Upright (1) with
two M10 x 95mm Bolts (18), two M10 Washers
(38), and two M10 Locknuts (33); do not tighten
the Locknuts yet.
Next, attach the Upright (1) to the Crossbar (3)
with two M10 x 70mm Bolts (34), two M10
Washers (38), and two M10 Locknuts (33); do
not tighten the Locknuts yet.
Repeat this step with the other Upright (1)
and the other Stabilizer (13).
2
3
38
38
33
33
33
33
34
18
13
13
1
1
1. Go to my.proform.com on your computer and
register your product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance
is ever needed
Note: If you do not have internet access, call
Customer Care (see the front cover of this
manual) and register your product.
Loading ...
Loading ...
Loading ...