Loading ...
Loading ...
Loading ...
Blade
Blade Arm
Blade Screw
and Washers
Fig. 20
Motor Screw
Blade Isolator
Blade Arm
13
BLADE INSTALLATION
18. Remove the ten motor screws from the underside
of the motor and save for blade arm attachment.
Discard the ve plastic motor blocks but keep the
screws (Fig. 18).
Fig. 18
Fig. 19
Motor Screw
Motor Screw
Blade Screw Flat Washer
Motor Block
19. Partially insert the three blade screws and spring
washers and at washers through blade and into
the blade arm. Tighten each screw with a Phillips
screwdriver (not included) starting with the one in
the middle. Repeat for remaining blades and blade
arms (Fig. 19).
20. Insert two previously removed motor screws
through the blade isolator and blade arm and then
into the motor. Tighten motor screws securely.
Repeat with remaining blade arms, making sure
to completely secure each blade arm before
proceeding with to the next (Fig. 20).
Motor Screw
Spring Washer
Loading ...
Loading ...
Loading ...