Loading ...
Loading ...
Loading ...
CLEANING & MAINTENANCE
9
Remove the cover and replace the light bulb with a screw type
base (E14, 240V/10W) bulb.
Never use hot water, solvents, commercial kitchen cleaners, aerosol cleaners,
metal polishers, caustic or abrasive cleaners or scourers to clean the appliance
as they will damage it. Many commercially available cleaning products and
detergents contain solvents that will damage your refrigerator. When cleaning,
using only a soft cloth and lukewarm soapy water.
CAUTION
Empty the drip tray
Undo the screw holding the tray and pull the drip tray
horizontally from the rear of the refrigerator. Be careful not to
bump the refrigeration tubing. The tray may have water in it,
be careful not to spill it while removing the tray. This should be
carried out at least once a year.
Door seals
Take care to keep door seals clean. Sticky food and drink can cause seals to stick to the
cabinet and tear when you open the door. Wash seal with a mild detergent and warm
water. Rinse thoroughly and dry.
Please check the points below after maintenance:
(1) Is there any damage to the power lead?
(2) Can the power plug be inserted into the power socket correctly?
(3) Is the power plug and/or lead heating up?
Unplug the power and remove the cover by holding the
cover by both sides and slide in the direction of the arrow.
Unscrew the bulb and replace with a new 10W bulb.
Replace the cover and plug in the refrigerator.
1.
2.
3.
WARNING
Before replacing the light: Turn appliance off at the power point, then remove
the power cord from the outlet. This will make sure there is no chance of electric
shock.
Replacing the Interior light
Loading ...
Loading ...
Loading ...