Loading ...
Loading ...
Loading ...
en Basic operation
34
Basic operation
Basic operation
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Charging
Depending on the appliance features,
you can charge the battery in three
different ways.
WARNING
Risk of fire!
Improper use of the battery and the
rapid charger
1
is dangerous.
▶
Only charge the battery in char-
gers that are recommended by the
manufacturer.
▶
Only use the battery in connection
with the Bosch appliance.
▶
Charge the battery using the ori-
ginal charging cable
1
or the ori-
ginal quick charger
1
.
▶
Only use batteries from the Power
for ALL 18V series.
Charging using the charging cable
1
Note:The power supply unit on the
charging cable
1
and the appliance
heat up while charging. This is nor-
mal and harmless.
Requirement:The battery has been
inserted.
→"Inserting and charging the bat-
tery", Page33
1. Place the vacuum cleaner close to
the socket.
2. Plug the appliance plug into the
vacuum cleaner.
→Fig.
6
3. Insert the mains plug into the
socket.
a The status display slowly flashes
white while the battery is charging.
Once the battery is fully charged,
the status display lights up white
for a few minutes.
Tip:To check that the battery has
charged fully, briefly disconnect the
vacuum cleaner from the mains. The
status display then lights up white.
You can charge the vacuum cleaner
whenever it is not in use.
Charging in the base station
1
WARNING
Risk of injury!
An appliance that falls may endanger
people.
▶
Ensure that children do not play
with the appliance, even when it is
in the base station
1
.
Note:The power supply unit on the
charging cable
1
and the appliance
heat up while charging. This is nor-
mal and harmless.
Requirement:The battery has been
inserted.
▶
Insert the vacuum cleaner into the
base station
1
from the front.
→Fig.
7
a The status display flashes white
while the battery is charging. Once
the battery is fully charged, the
status display lights up white for a
few minutes.
Tip:To check that the battery has
charged fully, briefly disconnect the
vacuum cleaner from the mains.
Once the status display lights up
white, the appliance is fully charged.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...