Loading ...
Loading ...
Loading ...
6
Installation - continued
Chimney Assembly
1. Place the chimney bottom onto the
range hood body around the outlet
(bent edge down).
2. Fix the chimney bottom to the range
hood body with the three 12mm
screws (from inside the range hood
body).
3. Place the chimney top inside the
chimney bottom (vents to the top).
4. Lift the chimney top to the chimney
mounting bracket, position the slots
over the mounting bracket holes
and attach together using the two
10mm chimney bracket screws.
Operating Instructions
Controls
Control Panel
The range hood is operated using the touch panel at the front of the appliance.
The light controls are to the left of the control panel. The light button turns the lamps on and off. The
light intensity is controlled by touching any of the round icons to the right of the light button (from
dim to bright). There are 10 intensity settings.
The fan speed controls are to the right of the control panel. The fan button turns the fan on and off.
The fan speed is controlled by touching any of the round icons to the right of the fan button (from
slowest to fastest). There are 10 speed settings.
Cleaning and Maintenance
General Maintenance
Switch off the canopy before cleaning or maintenance. To prevent surface damage never use abrasive
or oil based liquid cleaners. To clean the surfaces of the appliance, use mild detergent and warm water. In
areas of high humidity and coastal environments cleaning should be carried out frequently.
Warning: a build-up of oil may occur if the wall canopy is not cleaned regularly.
Filter Maintenance
To maintain efficiency, the filters should be removed regularly (approximately monthly), and washed using hot
soapy water or the dishwasher. Note - some discolouration of the frame may occur if washed in the
dishwasher.
Range hoods fitted with charcoal filters are designed to remove grease and odours from cooking vapours prior to
the cleansed air re-entering the kitchen (when the range hood is in recirculation mode). Charcoal filters should
be replaced every two to four months depending on use.
Note: Fully saturated charcoal filters can become a barrier to air movement therefore limiting range hood
performance. In the event of fire, grease laden filters could be flammable and therefore regular replacement is
recommended. In ducted installations, conventional aluminium filters are recommended.
10.c
Loading ...