Loading ...
Loading ...
Loading ...
5 (GB)
Identifying parts and controls
See the pages in parentheses for further details.
The 1 (power) switch and the control buttons are on the lower
right part of the front of the monitor.
Front of the display
Rear of the display
1 1 (Power) switch and indicator (pages 7, 16)
To turn the display on or off, press the 1 (power) switch.
The power indicator lights up in green when the display is
turned on, and lights up in orange when the monitor is in
power saving mode.
2 MENU button (pages 9, 10)
This button displays or closes the main menu.
You can also switch on the DDC/CI function by keeping this
button pressed for more than 8 seconds.
3 m/M buttons (page 10)
These buttons function as the m/M buttons when selecting
the menu items and making adjustments.
4 OK button (page 10)
This button selects the item or executes the settings in the
menu.
INPUT button (page 8) (SDM-E76D/SDM-E96D only)
This button switches the video input signal between INPUT1
and INPUT2 when two computers are connected to the
monitor.
5 Security Lock Hole
The security lock hole should be applied with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.
6 AC IN connector (page 7)
Connect the power cord (supplied).
7 DVI-D input connector (digital RGB) for INPUT1
(page 6) (SDM-E76D/SDM-E96D only)
This connector inputs digital RGB video signals that comply
with DVI Rev.1.0.
8 HD15 input connector (analog RGB) (page 6)
This connector inputs analog RGB video signals (0.7 Vp-p,
positive) and SYNC signals.
5
6
7
8
Press to turn the display on or off.
Loading ...
Loading ...
Loading ...