Loading ...
Loading ...
Loading ...
12
WARNING
When disposing of your appliance, use an
approved disposal site. Remove the plug
and ensure that any locks or catches are
removed, to prevent young children being
trapped inside.
4.Unscrew the bottom right hinge screws as the
bottom left hinge screws.
Note: Keep the hinge for the future use.
8.Turn the door 180 degrees, put the door on the
cabinet using the hinge and screws, on the top left
side. Use screw hole cover (right) to hide the holes
on the top right side of the beverage cabinet.
5.Flip the grille cover from left to right as following:
1. Pull it out from the left side slot.
2. Turn it 180 degree.
3. Put it into the right side slot.
6.Reattach the grille cover to the beverage
cabinet as shown below.
7.Change the axle hole parts of as follows:
1. Pull out top right axle hole part by knife or thin
blade screwdriver.
2. Turn the door 180 degrees, face to the bottom of
the door and remove the reinforcement part and
magnet supporter with the screwdriver.
3. Put the top left axle hole part into the door hole.
4. Turn the door 180 degrees, Reattach the
reinforcement part and magnet supporter using
the same screws.
Note: Handle the door carefully. It is fragile.
Bottom left hinge Bottom right hinge
(as supplied)
Top left axle hole part
Top right axle hole part
(as supplied)
Screw hole cover (right) Screw hole cover (left)
1
3
2
4
grille
cover
bottom right
hinge screws
the reinforcement part
and Hole sleeve
and screws
magnet and
magnet supporter
grille
Screw hole
cover (right)
right upper hinge
and special flange
screw
Loading ...
Loading ...
Loading ...