Loading ...
Loading ...
Loading ...
Servicing Your Honda
126
Rear Final Gear Oil
Refer to Safety Precautions on page 91.
Check the rear final gear oil level every 1,800 miles (3,000 km) or
300 hours of operating your Honda SXS, and add if needed.
1.
Park your Honda SXS on a firm, level surface.
2.
Remove the oil filler cap.
3.
Make sure the oil level is at the lower edge of the oil filler
inspection hole.
4.
Apply a thin coat of grease to a new O-ring, and insert it into the
oil filler cap groove.
5.
Install and tighten oil filler cap to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
Oil Recommendation
API classification GL-4 or GL-5 except oils labeled as
energy conserving on the circular
API service label
type hypoid gear oil
viscosity (weight) SAE 80W-90
suggested oil Honda shaft drive oil or equivalent
Checking Oil
RIGHT REAR
lower edge of
oil filler
inspection hole
oil filler cap
O-ring
19 SXS500M-31HL56400.book 126 ページ ２０１８年７月３１日 火曜日 午後６時６分
Loading ...
Loading ...
Loading ...