Loading ...
Loading ...
Loading ...
05
English English
06
Step 3
Find the doorbell chime in your house, then remove the cover and find the screw terminals with
TRANS
and
FRONT
markings. Use the provided
jumper for existing chime
to connect the two terminals. This is
to bypass the doorbell chime and will not affect the normal operation of the circuit.
Note:
•
The video doorbell requires user to bypass the existing chime first to get sufficient power.
Without this step, the video doorbell will still be able to power on but will operate unstably
.
•
In most cases, the existing doorbell circuit looks like below chart. Find the existing doorbell
chime in your house, remove the cover and take a photo of the wire connection in case you
need to reconnect it.
•
Use the provided jumper to connect FRONT and TRANS terminals to bypass the chime on the
circuit. Do not remove the original wire connecting to the chime.
If your doorbell chime has
different markings or you have multiple chimes, refer to the help session in the App for the
custom wiring instructions or consult a qualified electrician
.
•
When the jumper is in place, the existing chime will not sound anymore
.
What are required: Jumper for existing chime / Phillips-Head Screwdriver
Step 4
Remove the existing doorbell button at the front door. Pull the two wires out carefully when removing
the old doorbell. Straighten the wire ends if necessary.
What's required: Phillips-Head Screwdriver
Loading ...
Loading ...
Loading ...