Loading ...
Loading ...
Loading ...
Rev 0.0 15
INSTALLATION INSTRUCTIONS
EN
5.1.2 Levelling the appliance
Level the appliance using the relative adjustable feet (e.g.: ref. A g. 5-02); use an
open-ended wrench to rotate the feet until the dishwasher is perfectly level.
Some models are tted with just one rear foot which can be adjusted with a screw
located at the bottom front of the appliance (ref. A g. 5-03); use a suitable Phillips
screwdriver to turn the screw until the dishwasher is perfectly level.
Use a spirit level to check the appliance is perfectly level (ref. B g. 5-02).
Leveling is vital for assuring correct dishwasher operation.
Make sure to leave a gap of at least 3 mm (7/64”) between the top of the dish-
washer and the worktop (ref. C g. 5-02).
Fig. 5-02
Loading ...
Loading ...
Loading ...